Proud to be a UK-based company
Contact us
Important compatibility info
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Function | Timing Belt Kit |
| Weight | 0.63 kg |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (37285)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (37275)
- 1x Febi Tensioner Pulley, timing belt (39101)
£60.69
Important compatibility info
| Type | Repait Kit, spring bearing frame |
| Weight | 0.9005 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Function | Repait Kit, spring bearing frame |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Bushing, leaf spring (35615)
- 1x Febi Shaft Seal (44580)
- 6x Febi Nut (18328)
- 1x Febi Grease Nipple (01096)
- 1x Febi Seal Ring, wheel hub (44681)
£60.70
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.714 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Paired article numbers | 179134 |
| Weight | 1.976 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 30 mm |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.71
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.5 mm |
| Weight | 2.408 kg |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing, with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Paired article numbers | 177707 |
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (170529)
- 1x Febi Nut (43739)
£60.71
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 21.5 mm |
| Weight | 2.408 kg |
| Paired article numbers | 177708 |
| Steering arm type | Control Arm |
| Additional Information 2 | with bearing, with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| External Thread Size | M14 x 1,5 |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (170530)
- 1x Febi Nut (43739)
£60.71
Important compatibility info
| Type | Gear, air compressor |
| Weight | 0.480 kg |
| Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.72
Important compatibility info
| Function | Stabiliser Bar, suspension |
| Length | 950 mm |
| Placement on Vehicle | Front Axle |
| Weight | 3.93 kg |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Type | Stabiliser Bar, suspension |
| Additional Information 2 | with coupling rod |
| Stabiliser Diameter | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (37073)
- 1x Febi Repair Kit, stabiliser bush (37079)
£60.72
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Length | 340 mm |
| Diameter | 1 mm |
| Additional Information | with rubber mounts |
| Rod/Strut | Coupling Rod |
| Bore Diameter | 40 mm |
| Weight | 5.200 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.73
Important compatibility info
| Weight | 1.850 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| for OE number | 6Q0 199 167 DJ |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.73
Important compatibility info
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75 |
| Outer diameter | 259 mm. 200 mm |
| Thickness | 175 mm. 400 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Weight | 7.0 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Number of Teeth | 129 |
| Outer diameter | 393 mm |
| Function | Ring Gear, flywheel |
| Type | Ring Gear, flywheel |
| Weight | 1.524 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.74
Important compatibility info
| Control Type | Rotary Operation |
| Number of Connectors / Ports | 14 |
| Switch | with dimmer switch |
| Combi Switch Function | with hazard warning light function, with fog-lamp function, with rear fog light function, with light dimmer function |
| Switch Lighting | Yellow |
| Weight | 0.099 kg |
| Type | Switch, headlight |
| Function | Switch, headlight |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.75
Important compatibility info
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 32 mm |
| Weight | 1.253 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.76
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.8 kg |
| Placement on Vehicle | Rear |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.77
Important compatibility info
| Type | Oxygen Sensor |
| Cable Length | 710 mm |
| Function | Oxygen Sensor |
| Weight | 0.096 kg |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.77
Important compatibility info
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Bore Diameter | 19 mm |
| Weight | 0.130 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.78
Important compatibility info
| Placement on Vehicle | Lower Left |
| Weight | 0.600 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.80
Important compatibility info
| Inner diameter | 19 mm |
| Number of Ribs | 5 |
| Type | Belt Pulley, crankshaft |
| Parameter | 6 PK |
| Width | 40 mm |
| Outer diameter | 135 mm |
| Function | Belt Pulley, crankshaft |
| Weight | 1.130 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.80
Important compatibility info
| Type | Piston, air compressor |
| Outer diameter | 92 mm |
| Function | Piston, air compressor |
| Weight | 0.46 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.82
Important compatibility info
| Centering Diameter | 59 mm |
| Weight | 5.54 kg |
| Type | Brake Drum |
| Rim Hole Number | 4 -Hole |
| Thickness | 61 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 230 mm |
| Function | Brake Drum |
| Inner diameter | 228.3 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Outer diameter | 267.8 mm |
| Width | 48.2 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.83
Important compatibility info
| Weight | 0.020 kg |
| Length | 32 mm |
| Width | 38 mm |
| Thickness | 36 mm |
| Number of Connectors / Ports | 3 |
| Function | Sensor, intake manifold pressure |
| Type | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.84
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.091 kg |
| Cable Length | 560 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.84
Important compatibility info
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Placement on Vehicle | Front |
| Material | Rubber/Metal |
| Bolt Hole Circle Diameter | 90 mm |
| Number of Holes | 6 |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Weight | 1.05 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (08843)
- 6x Febi Bolt, drive shaft flange (04678)
- 1x Febi Assembly Kit, propshaft joint (22117)
£60.85
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75, M16 x 2 |
| Additional Information | without piston |
| Weight | 5.300 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Outer diameter | 260 mm |
| Thickness | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.86
Important compatibility info
| Weight | 1.680 kg |
| External Thread Size | M10 x 1,5 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.86
Important compatibility info
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.14 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.89
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| External Thread Size | M12 x 1,25 |
| Weight | 0.95 kg |
| Operating Mode | Mechanical |
| Max. Length | 182 mm |
| Min. Length | 159 mm |
| Pipe Diameter | 56 mm. 40 mm |
| Mounting points diameter | 20 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.89
Important compatibility info
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| for OE number | 04L 906 088 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.90
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Weight | 3.231 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 156 mm |
| Outer diameter | 156 mm |
| Inner diameter | 38 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 130 mm |
| Machining | High-carbon |
| Type | Wheel Hub |
| Function | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.90
Important compatibility info
| Weight | 0.683 kg |
| Housing length | 195 mm |
| Mounting points diameter | 10 mm |
| Length | 316 mm |
| Eject Force | 1860 N |
| Stroke | 71 mm |
| Housing Diameter | 35 mm |
| Piston conrod diameter | 10 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.90
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Thickness | 49 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Outer diameter | 325 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Placement on Vehicle | Rear Axle |
| Number of mounting bores | 1 |
| Weight | 7.7 kg |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.90
Important compatibility info
| Placement on Vehicle | Upper Front Axle, both sides |
| Weight | 1.334 kg |
| Function | Mounting, control/trailing arm |
| Inner diameter | 12 mm |
| Thickness | 29 mm |
| Outer diameter | 47 mm. 20 mm |
| Type | Mounting, control/trailing arm |
| for OE number | 115 330 17 75/2 |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 8x Febi Mounting, control/trailing arm (01698)
- 4x Febi Screw (01696)
- 4x Febi Nut (01697)
£60.91
Important compatibility info
| Weight | 1.97 kg |
| Placement on Vehicle | Right |
| Length | 168 mm |
| Width | 156 mm |
| Thickness | 126 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.91
Important compatibility info
| Type | Mounting, engine |
| Weight | 0.1435 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.91
Important compatibility info
| Weight | 7.65 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 34.3 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 66 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.95
Important compatibility info
| Weight | 8.7 kg |
| Placement on Vehicle | Rear Axle |
| Thickness | 40 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Function | Brake Drum |
| Type | Brake Drum |
| Inner Brake Drum Diameter | 200 mm |
| Rim Hole Number | 4 -Hole |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.96
Important compatibility info
| Outer diameter | 282 mm. 345 mm |
| Inner diameter | 127 mm |
| Filter type | Filter Insert |
| Function | Air Filter |
| Weight | 5.25 kg |
| Height | 406 mm. 417 mm |
| Type | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.96
Important compatibility info
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 179257 |
| Function | Brake Caliper |
| Weight | 5.117 kg |
| Type | Brake Caliper |
| Brake caliper piston diameter | 46 mm |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.97
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 178067 |
| Weight | 3.34 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.97
Important compatibility info
| Paired article numbers | 179255 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 5.117 kg |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Material | Cast Iron |
| Brake caliper piston diameter | 46 mm |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.97
Important compatibility info
| Paired article numbers | 178066 |
| Weight | 3.34 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Placement on Vehicle | Rear Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£60.97
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Weight | 1.005 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (22388)
- 7x Febi Screw, waterpump (22387)
£60.99
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Solid |
| Weight | 5.64 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 33.2 mm |
| Brake Disc Thickness | 12 mm |
| Minimum thickness | 10.4 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.01
Important compatibility info
| Weight | 2.56 kg |
| Placement on Vehicle | Rear Axle |
| Width | 40 mm |
| Outer diameter | 228 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.01
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.8 kg |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.03
Important compatibility info
| Weight | 1.17 kg |
| Number of Teeth | 123 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Belts | with rounded tooth profile |
| Width | 27 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21270)
- 1x Febi Water Pump, engine cooling (22241)
£61.05
Important compatibility info
| Weight | 0.046 kg |
| Function | Sensor, exhaust gas temperature |
| Cable Length | 400 mm |
| Number of Connectors / Ports | 2 |
| Spanner Size | 17 |
| Placement on Vehicle | before soot particulate filter |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Weight | 1.294 kg |
| Cone Size | 21 mm |
| Material | Aluminium |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
Important compatibility info
| Height | 159 mm |
| Type | Fuel filter |
| Function | Fuel filter |
| Pipe Diameter | 10 mm |
| Outer diameter | 99 mm |
| Filter type | with water drain screw, with water separator, with filter heating |
| Weight | 0.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£61.07
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023