Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 7.50 kg |
| Length | 696 mm |
| Placement on Vehicle | Left |
| Paired article numbers | 45514 |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| External Thread Size | M22 x 1,5 |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Screw length below head | 661 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 0.672 kg |
| Width of castor bearing surface | 20 mm |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| for OE number | 30650957 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| External Thread Size | M22 x 1,5 |
| Weight | 7.50 kg |
| Placement on Vehicle | Right |
| Paired article numbers | 45515 |
| Function | Brake Shaft, drum brake |
| Type | Brake Shaft, drum brake |
| Length | 696 mm |
| Outer diameter | 108 mm |
| Number of Teeth | 10 |
| Screw length below head | 661 mm |
| Brake Shaft Cam | S-cam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 2.36 kg |
| Placement on Vehicle | Rear Axle |
| Type | Gasket Set, wheel hub |
| Function | Gasket Set, wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Shaft Seal, drive shaft (38541)
- 1x Febi Shaft Seal, wheel hub (24758)
- 1x Febi Ring, wheel hub (04455)
- 1x Febi Gasket, external planetary gearbox (08009)
- 1x Febi Seal Ring, wheel hub (08008)
- 1x Febi Thrust Washer, external planetary gearbox (21951)
- 1x Febi Cover Plate, dust-cover wheel bearing (21974)
- 1x Febi Gasket, external planetary gearbox (08010)
- 1x Febi Gasket, external planetary gearbox (08011)
- 1x Febi Toothed Disc, external planetary gearbox (08488)
£62.12
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Outer diameter | 65 mm |
| Material | Plastic |
| Weight | 0.523 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 2.227 kg |
| Number of Ribs | 6 |
| Width | 44 mm |
| Outer diameter | 157 mm |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Inner diameter | 31 mm |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 0.96 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Rear |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| for OE number | 06 82 504 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 0.06 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, camshaft position |
| Function | Sensor, camshaft position |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.12
Important compatibility info
| Weight | 0.3 kg |
| Colour | Black |
| Number of Connectors / Ports | 3 |
| Combi Switch Function | with indicator function, with high beam function, with park light function |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.13
Important compatibility info
| for OE number | 1628.HQ |
| Spanner Size | 22 |
| Weight | 0.135 kg |
| Cable Length | 1500 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.13
Important compatibility info
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 936 mm |
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Weight | 0.546 kg |
| Material | Aluminium |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Piston Diameter | 25.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Weight | 0.777 kg |
| Function | Charge Air Hose |
| Placement on Vehicle | Left |
| Type | Charge Air Hose |
| Turbocharger line | Charge air cooler to intake manifold |
| Additional Information 2 | with quick couplers |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.15
Important compatibility info
| Pipe Diameter | 45 mm. 63 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 15 mm |
| Min. Length | 228 mm |
| Operating Mode | Mechanical |
| Function | Shock Absorber, driver cab suspension |
| Max. Length | 296 mm |
| Weight | 3.35 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 2.670 kg |
| Height | 476 mm |
| Outer diameter | 267 mm |
| Inner diameter | 170 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Parameter | 7 PK |
| Type | Belt Pulley, crankshaft |
| Width | 30 mm |
| Outer diameter | 163 mm |
| Inner diameter | 38 mm |
| Weight | 1.495 kg |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Function | Link/Coupling Rod, stabiliser bar |
| Type | Link/Coupling Rod, stabiliser bar |
| Pipe Diameter | 36 mm |
| Weight | 3.500 kg |
| Rod/Strut | Coupling Rod |
| Additional Information 2 | with crown nut |
| Diameter | 36 mm |
| Length | 284 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.76 kg |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 60 mm |
| Width of castor bearing surface | 26.5 mm |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Additional Information 2 | with screw |
| Housing material | Metal |
| for OE number | 5751.30 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 158 mm |
| Inner diameter | 30 mm |
| Weight | 1.96 kg |
| Additional Information 2 | with screw |
| Width | 37 mm |
| Number of Ribs | 5 |
| Spanner Size | 22 |
| Parameter | 6PK |
| Outer diameter 2 | 153 mm |
| Function | Belt Pulley, crankshaft |
| Extra Description | ProKit |
| External Thread Size | M14 x 1,5 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (47154)
- 1x Febi Pulley Bolt (33675)
£62.16
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Weight | 0.800 kg |
| Width of castor bearing surface | 19 mm |
| Track rollers material | Metal |
| Outer diameter | 65 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 6.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 563 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 3.440 kg |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Min. Length | 326 mm |
| Pipe Diameter | 84 mm. 41 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Cable Length | 500 mm |
| Number of circuits | 18 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Inner diameter | 35 mm |
| Outer diameter | 175 mm |
| Weight | 2.74 kg |
| Width | 50 mm |
| Number of Ribs | 2 |
| Colour | Black |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Type | Seal Kit, multi-valve |
| Function | Seal Kit, multi-valve |
| Weight | 0.65 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Additional Information | with gasket/seal, with temperature sensor |
| Weight | 0.323 kg |
| Opening Temperature | 88 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.18 kg |
| Fill Medium | Mineral Oil |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| for OE number | 000 260 79 98 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 44 mm |
| Inner diameter | 8.11 mm |
| Function | Slave Cylinder, engine brake |
| Weight | 0.315 kg |
| Length | 172.8 mm |
| Type | Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Function | Sealing Set, air compressor |
| Weight | 0.31 kg |
| Type | Sealing Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 3.8 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44379 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| External Thread Size | M18 x 1,5 |
| Internal Thread Size | M28 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22.2 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 36 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Weight | 4.6 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Length | 172 mm |
| Outer diameter | 32 mm |
| Weight | 1.65 kg |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (29731)
- 1x Febi Bush, steering knuckle (29732)
- 2x Febi Bush, steering knuckle (44164)
- 2x Febi Seal Ring, steering knuckle (29735)
- 1x Febi Seal Ring, steering knuckle (29737)
- 1x Febi Seal Ring, steering knuckle (29736)
- 1x Febi Bush, kingpin (29733)
- 1x Febi Spacer, kingpin (29740)
- 1x Febi Spacer, kingpin (29741)
- 1x Febi Spacer, kingpin (29742)
- 1x Febi Spacer, kingpin (29743)
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 2.021 kg |
| Paired article numbers | 44519 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
£62.16
Important compatibility info
| Weight | 4.05 kg |
| Placement on Vehicle | Front Axle, Steered trailing axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 559 mm |
| Min. Length | 376 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Additional Information | with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44378 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 3.8 kg |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 165 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 4PK + 7PK |
| Number of Ribs | 7 |
| Weight | 2.86 kg |
| Inner diameter | 31 mm |
| Thickness | 54 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 1.88 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40362 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
| Replaces | 40369 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29242)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£62.16
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 123 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 12 |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 138 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Weight | 18.0 kg |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 70 mm |
| Additional Information | with fastening/mounting material |
| Material | Plastic |
| Operating Mode | Automatic |
| Weight | 1.467 kg |
| Width of castor bearing surface | 35 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 0.284 kg |
| Number of Connectors / Ports | 13 |
| Combi Switch Function | with indicator function, with hazard warning light function, with headlight flasher, with high beam function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Weight | 0.917 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 1.4 kg |
| Voltage | 12 V |
| Type | Interior Blower |
| Function | Interior Blower |
| Driver Position | for right-hand drive vehicles |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Function | EGR Valve |
| Weight | 0.532 kg |
| for OE number | 11 71 7 804 378 |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 2.021 kg |
| Placement on Vehicle | Front Axle Right, Front, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 44518 |
| Outer Length | 470 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (33625)
- 1x Febi Nut, ball joint (23696)
£62.16
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 692 mm |
| Min. Length | 422 mm |
| Pipe Diameter | 63 mm. 73 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 4.7 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Screw length below head | 688 mm |
| Weight | 0.743 kg |
| for OE number | 21100909 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Material | Rubber/Metal |
| Weight | 0.090 kg |
| Function | Gasket, housing cover (crankcase) |
| Type | Gasket, housing cover (crankcase) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Weight | 6.120 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 286 mm |
| Thickness | 38.6 mm |
| Brake Disc Thickness | 22.1 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Length | 70 mm |
| Width | 45 mm |
| Function | Tensioner, timing chain |
| Weight | 0.123 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£62.16
Important compatibility info
| Bearing Type | Cylindrical Roller Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Inner diameter | 41 mm |
| Weight | 0.340 kg |
| Outer diameter | 64 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 22 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (178722)
£62.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023