Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 172 mm |
| Weight | 1.65 kg |
| Function | Repair Kit, kingpin |
| Outer diameter | 32 mm |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (29731)
- 1x Febi Bush, steering knuckle (29732)
- 1x Febi Bush, kingpin (29733)
- 1x Febi Bush, kingpin (29734)
- 2x Febi Seal Ring, steering knuckle (29735)
- 1x Febi Seal Ring, steering knuckle (29736)
- 1x Febi Seal Ring, steering knuckle (29737)
- 1x Febi Spacer, kingpin (29740)
- 1x Febi Spacer, kingpin (29741)
- 1x Febi Spacer, kingpin (29742)
- 1x Febi Spacer, kingpin (29743)
£64.14
Important compatibility info
| Weight | 6.9 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 751 mm. 801 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 19850 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.722 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 0.17 kg |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Brake caliper piston diameter | 35 mm |
| Placement on Vehicle | Rear Axle Right |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 181165 |
| Weight | 1.420 kg |
| Material | Cast Iron |
| Function | Brake Caliper |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 0.445 kg |
| Voltage | 24 V |
| Spanner Size | 19 |
| Number of Connectors / Ports | 2 |
| Frequency Range | 380 Hz |
| Type | Signal Horn |
| Function | Signal Horn |
| Noise Level | 118 dB |
| Operating Mode | Electric-pneumatic |
| Power Consumption | 30 W |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 692 mm |
| Min. Length | 422 mm |
| Pipe Diameter | 63 mm. 73 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 4.7 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Length | 497 mm |
| Height | 107 mm |
| Width | 302 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.890 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Replaces | 172288 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Number of Wings | 6 |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Water pump impeller material | Metal |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Seal Material | Paper |
| Weight | 1.27 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 123 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 12 |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 138 mm |
| Surface | Coated |
| Function | Brake Disc |
| Internal Thread Size | M12 x 1,75 |
| Type | Brake Disc |
| Weight | 18.0 kg |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 4.943 kg |
| Number of mounting bores | 6 |
| Min. Length | 511 mm |
| Wheel Sided Joint Diameter | 78 mm |
| Transmission-side joint diameter | 93.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Material | Plastic |
| Additional Information 2 | with bolts/screws |
| Operating Mode | Pneumatic |
| Number of Connectors / Ports | 3 |
| Weight | 0.30 kg |
| Type | Actuator, seat adjustment |
| Function | Actuator, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Filter type | Filter Insert |
| Outer diameter | 220 mm |
| Height | 737 mm |
| Function | Air Filter |
| Type | Air Filter |
| Outer diameter 1 | 146 mm |
| Weight | 2.57 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 1.88 kg |
| Placement on Vehicle | Front Axle Left, Rear |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 40362 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
| Replaces | 40369 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (29242)
- 1x Febi Screw (37927)
- 1x Febi Nut (34653)
- 1x Febi Nut (38356)
£64.14
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.145 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Paired article numbers | 182437 |
| External Teeth, Diff.Side | 25 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.726 kg |
| Function | Drive Shaft |
| Min. Length | 596 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 0.423 kg |
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Valve type | Solenoid Valve |
| Pressure | 10 bar |
| Function | Pressure Converter, exhaust control |
| Type | Pressure Converter, exhaust control |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Cone Size | 32 mm |
| Length | 387 mm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 36 mm |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Weight | 4.18 kg |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Length | 716 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 38 mm |
| Adjustable | Adjustable on both sides |
| Cone Size | 32 mm |
| Weight | 6.250 kg |
| Rod/Strut | Push Rod |
| Thread Size | M27 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 1.4 kg |
| Outer diameter | 161 mm |
| Thickness | 26 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 4 |
| Parameter | 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023