Proud to be a UK-based company
Contact us
Important compatibility info
| Length | 172 mm |
| Weight | 1.65 kg |
| Function | Repair Kit, kingpin |
| Outer diameter | 32 mm |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with slide bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (29731)
- 1x Febi Bush, steering knuckle (29732)
- 1x Febi Bush, kingpin (29733)
- 1x Febi Bush, kingpin (29734)
- 2x Febi Seal Ring, steering knuckle (29735)
- 1x Febi Seal Ring, steering knuckle (29736)
- 1x Febi Seal Ring, steering knuckle (29737)
- 1x Febi Spacer, kingpin (29740)
- 1x Febi Spacer, kingpin (29741)
- 1x Febi Spacer, kingpin (29742)
- 1x Febi Spacer, kingpin (29743)
£64.14
Important compatibility info
| Bolt Hole Circle Diameter | 100 mm |
| Outer diameter | 127 mm |
| Thickness | 75 mm |
| Function | Wheel Hub |
| Inner diameter | 30 mm |
| Number of Holes | 5 |
| Width | 127 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Type | Wheel Hub |
| Weight | 1.5 kg |
| Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Paired article numbers | 182437 |
| External Teeth, Diff.Side | 25 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 81.5 mm |
| Wheel Sided Joint Diameter | 91 mm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 6.726 kg |
| Function | Drive Shaft |
| Min. Length | 596 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 2 |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Weight | 2.1 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Max. Length | 427 mm |
| Min. Length | 325 mm |
| Pipe Diameter | 56 mm. 43.5 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Filter type | Filter Insert |
| Outer diameter | 220 mm |
| Height | 737 mm |
| Function | Air Filter |
| Type | Air Filter |
| Outer diameter 1 | 146 mm |
| Weight | 2.57 kg |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 692 mm |
| Min. Length | 422 mm |
| Pipe Diameter | 63 mm. 73 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| Weight | 4.7 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Outer length 1 | 1130 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Placement on Vehicle | Right |
| Weight | 0.835 kg |
| Inner length 1 | 835 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Lower, Rear, Rear Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 1.6 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| Weight | 6.9 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 751 mm. 801 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
Important compatibility info
| for OE number | 5 264 546 |
| Weight | 0.855 kg |
| Function | Oil Pump |
| Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£64.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023