Important compatibility info
Additional Information 2 | Requires special tools for mounting |
Weight | 0.095 kg |
Function | Chain, oil pump drive |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 52 |
Timing Chain Size | G44-AMD1 |
Type | Chain, oil pump drive |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.51 kg |
Function | Mounting, engine |
Bearing/Mounting Type | Hydro Mount |
Colour | Green |
Placement on Vehicle | Right |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.72 kg |
Outer diameter | 90 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 24.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Paired article numbers | 182078 |
Weight | 4.514 kg |
Cone Size | 20 mm |
Placement on Vehicle | Front Axle Right, Lower |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Weight | 1.1 kg |
Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Cone Size | 24 mm |
Material | Aluminium |
Additional Information | with lock nut, with rubber mounts |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.951 kg |
Outer diameter | 345 mm |
Voltage | 12 V |
Rated Power | 350 W |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Coolant Control Valve |
Weight | 0.696 kg |
Extra Description | febi Plus |
Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 1.4 kW |
Weight | 2.8 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.15 kg |
Function | Repair Kit, automatic adjustment |
Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rim Hole Number | 8 -Hole |
Weight | 8.2 kg |
Rotor Style | Internally Vented |
Placement on Vehicle | Rear Axle |
Outer diameter | 290 mm |
Thickness | 73.5 mm |
Brake Disc Thickness | 22 mm |
Minimum thickness | 19 mm |
Bolt Hole Circle Diameter | 127 mm |
Centering Diameter | 110 mm |
Surface | Coated |
Type | Brake Disc Rotor |
Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Outer diameter | 270 mm |
Thickness | 33 mm |
Brake Disc Thickness | 9 mm |
Minimum thickness | 7.5 mm |
Bolt Hole Circle Diameter | 100 mm |
Centering Diameter | 55 mm |
Surface | Coated |
Weight | 3.4 kg |
Rim Hole Number | 5 -Hole |
Type | Brake Disc Rotor |
Function | Brake Disc |
Rotor Style | solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 30 |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Function | Drive Shaft |
Weight | 7.124 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 617 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 91.7 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Length | 590 mm |
Diameter | 120 mm |
Placement on Vehicle | 2nd rear axle |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.154 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 944 mm |
Outer length 2 | 1233 mm |
Inner length 2 | 965 mm |
Outer length 1 | 1253 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with rubber-metal mounts |
Weight | 4.1 kg |
Placement on Vehicle | Front Axle |
Length | 330 mm |
Thickness | 80 mm |
Rod/Strut | Coupling Rod |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Length | 370 mm |
Function | Heat Exchanger, interior heating |
Type | Heat Exchanger, interior heating |
Weight | 0.994 kg |
Additional Information | with gasket/seal |
Core Depth | 33 mm |
Core Width | 179 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.737 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 134 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.640 kg |
Placement on Vehicle | Lower Front Axle, Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 06792 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (08570)
- 1x Febi Ball Joint (08571)
Important compatibility info
Weight | 6.200 kg |
Function | Centre Rod Assembly |
Pipe Diameter | 42 mm |
Cone Size | 26 mm |
Colour | Red |
Rod/Strut | Push Rod |
Outer diameter | 42 mm |
Length | 897 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 8 |
Function | Alternator Freewheel Clutch |
Weight | 0.46 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023