Proud to be a UK-based company
Contact us
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Weight | 2.1 kg |
| Placement on Vehicle | Rear |
| Paired article numbers | 178447 |
| Max. Length | 265 mm |
| Min. Length | 262 mm |
| Pipe Diameter | 70 mm. 78 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 3.599 kg |
| Placement on Vehicle | Front Axle Left, Lower, Rear |
| Material | Cast Steel |
| Inner diameter | 14 mm. 23 mm |
| Steering arm type | Control Arm |
| Paired article numbers | 44982 |
| Cone Size | 23.2 mm. 26.8 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with rubber mount, with ball joint |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Outer diameter | 267 mm |
| Function | Air Filter |
| Type | Air Filter |
| Inner diameter | 161 mm |
| Filter type | Filter Insert |
| Weight | 0.452 kg |
| Height | 471 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 0.481 kg |
| Function | Ignition Coil |
| Ignition Coil | 2 Spark |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 820 mm |
| Rod/Strut | Push Rod |
| Weight | 4.8 kg |
| Function | Centre Rod Assembly |
| Internal Thread Size | M28 x 1,5 RHT |
| Cone Size | 22 mm |
| Pipe Diameter | 38 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 2.0 kg |
| Min. Length | 243 mm |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| External Thread Size | M12 x 1,25 |
| Max. Length | 346 mm |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Pneumatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Number of Connectors / Ports | 2 |
| Function | Sensor, wheel speed |
| Weight | 0.04 kg |
| Type | Sensor, wheel speed |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.015 kg |
| Placement on Vehicle | Front, both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Replaces | 29832 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 6.731 kg |
| Type | Cylinder Liner |
| Function | Cylinder Liner |
| for OE number | 51.01201.0468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 2.260 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33277)
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£66.12
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Weight | 3.25 kg |
| Function | Starter |
| Type | Starter |
| for OE number | 62 02 094 |
| Replaces | 101608 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 1.94 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 30517 |
| Function | Control/Trailing Arm, wheel suspension |
| Rod/Strut | Pull Rod |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with screw, with bearing, with ball joint |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Length | 1345 mm |
| Number of Ribs | 6 |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Aramid |
| Weight | 0.199 kg |
| Alternator type | for starter generator |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (182094)
- 1x Febi Belt Tensioner, v-ribbed belt (40898)
£66.12
Important compatibility info
| Length | 70 mm |
| Width | 110 mm |
| Thickness | 36.5 mm |
| Voltage | 28 V |
| Number of Connectors / Ports | 5 |
| Function | Alternator Regulator |
| Type | Alternator Regulator |
| Weight | 0.09 kg |
| Hole Spacing | 79 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Housing Diameter | 18 mm |
| Placement on Vehicle | both sides |
| Housing length | 306 mm |
| Piston conrod diameter | 8 mm |
| Mounting points diameter | 16.5 mm |
| Length | 556 mm |
| Eject Force | 575 N |
| Type | Gas Spring, boot/cargo area |
| Function | Gas Spring, boot/cargo area |
| Stroke | 179 mm |
| Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 4.665 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 337 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 80 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.12
Important compatibility info
| Weight | 0.719 kg |
| Operating Mode | Automatic |
| Function | V-Ribbed Belt Set |
| Track rollers material | Plastic |
| Additional Information 2 | with tensioner element |
| Outer diameter | 65 mm |
| Type | V-Ribbed Belt Set |
| Width of castor bearing surface | 26 mm |
| Length | 1163 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28930)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
£66.12
Important compatibility info
| Type | Window Regulator |
| Weight | 0.98 kg |
| Paired article numbers | 176487 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Right Front |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.14
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 0.98 kg |
| Paired article numbers | 176488 |
| Operating Mode | Electric |
| Placement on Vehicle | Left Front |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.14
Important compatibility info
| Weight | 8.660 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 299 mm |
| Thickness | 48.5 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.15
Important compatibility info
| Weight | 0.476 kg |
| Function | Brake Master Cylinder |
| Type | Brake Master Cylinder |
| Material | Aluminium |
| Piston Diameter | 20.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.15
Important compatibility info
| Placement on Vehicle | Lower, Left Front |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 179033 |
| Weight | 4.862 kg |
| Cone Size | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.16
Important compatibility info
| Thickness | 45 mm |
| Brake Disc Thickness | 24 mm |
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 2 |
| Centering Diameter | 72 mm |
| Minimum thickness | 22 mm |
| Outer diameter | 322 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 114.3 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Weight | 8.520 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.18
Important compatibility info
| External Teeth, Diff.Side | 24 |
| Transmission-side joint diameter | 74.2 mm |
| Wheel Sided Joint Diameter | 97.2 mm |
| Min. Length | 630 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Paired article numbers | 182749 |
| External Teeth, Wheel Side | 25 |
| Weight | 5.318 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.19
Important compatibility info
| Weight | 14.0 kg |
| Outer diameter | 325 mm |
| Placement on Vehicle | Front Axle |
| Thickness | 103 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 10 |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 158 mm |
| Surface | Coated |
| Type | Brake Disc |
| Function | Brake Disc |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.20
Important compatibility info
| Type | Brake Caliper |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Paired article numbers | 178209 |
| Weight | 5.1 kg |
| Function | Brake Caliper |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.20
Important compatibility info
| Weight | 5.1 kg |
| Paired article numbers | 178208 |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (2 pistons) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 48 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.20
Important compatibility info
| Number of Teeth | 141 |
| Weight | 1.711 kg |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (187718)
- 1x Febi Water Pump, engine cooling (18640)
£66.21
Important compatibility info
| Weight | 0.541 kg |
| Placement on Vehicle | Lower |
| Surface | Coated |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 70 |
| Timing Chain Size | G68HS-8 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49528)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
£66.23
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 0.38 kg |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.25
Important compatibility info
| Weight | 2.035 kg |
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 50 mm |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Bolt Hole Circle Diameter | 112 mm |
| Weight | 3.915 kg |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.30
Important compatibility info
| Weight | 4.78 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 269 mm |
| Thickness | 47.9 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.30
Important compatibility info
| Weight | 2.476 kg |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.31
Important compatibility info
| External Thread Size | M10 x 1,5 |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Weight | 0.650 kg |
| for OE number | 22 11 6 859 414 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.32
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Transmission-side joint diameter | 79 mm |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 83.1 mm |
| Min. Length | 895 mm |
| Weight | 7.520 kg |
| External Teeth, Wheel Side | 23 |
| Thread Size | M20x1,5 |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.32
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 79 mm |
| Wheel Sided Joint Diameter | 79.2 mm |
| Min. Length | 615 mm |
| External Teeth, Diff.Side | 22 |
| Weight | 5.400 kg |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24X1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.34
Important compatibility info
| Length | 375 mm |
| Height | 94 mm |
| Width | 247 mm |
| Filter type | Filter Insert |
| Type | Air Filter |
| Function | Air Filter |
| Weight | 0.945 kg |
| Additional Information 2 | with pre-filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.35
Important compatibility info
| Placement on Vehicle | Right Front |
| Weight | 2.051 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.36
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Number of Connectors / Ports | 2 |
| Weight | 0.050 kg |
| External Thread Size | M14 x 1,5 |
| Cable Length | 250 mm |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.39
Important compatibility info
| External Teeth, Wheel Side | 36 |
| Weight | 5.560 kg |
| Number of mounting bores | 6 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 88.8 mm |
| Transmission-side joint diameter | 99.9 mm |
| Bolt Hole Circle Diameter | 85.9 mm |
| Bore Diameter | 8.52 mm |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with grease |
| Min. Length | 519 mm |
| Thread Size | M16x1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.40
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Placement on Vehicle | Rear Axle Left |
| Brake caliper piston diameter | 48 mm |
| Paired article numbers | 181700 |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Weight | 2.78 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.40
Important compatibility info
| Type | Gas Spring, boot/cargo area |
| Eject Force | 620 N |
| Mounting points diameter | 18 mm |
| Function | Gas Spring, boot/cargo area |
| Stroke | 199 mm |
| Housing length | 349 mm |
| Piston conrod diameter | 8 mm |
| Weight | 0.2 kg |
| Housing Diameter | 19 mm |
| Length | 578 mm |
| Placement on Vehicle | both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.40
Important compatibility info
| Weight | 1.400 kg |
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 23 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.43
Important compatibility info
| Extra Description | ProKit |
| Weight | 1.14 kg |
| Placement on Vehicle | Rear |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Number of Holes | 6 |
| Additional Information 2 | with bolts/screws, with washers |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (21191)
- 3x Febi Screw (21197)
- 3x Febi Screw (03703)
- 3x Febi Washer (08375)
- 3x Febi Nut (04571)
- 3x Febi Nut (19104)
- 3x Febi Washer (19107)
£66.43
Important compatibility info
| Weight | 3.78 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107886 |
| Cone Size | 21 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.44
Important compatibility info
| Weight | 0.663 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.46
Important compatibility info
| Weight | 0.51 kg |
| Length | 105.3 mm |
| Width | 62 mm. 58 mm |
| Function | Solenoid Valve, retarder |
| Voltage | 24 V |
| Inner diameter | 8.6 mm |
| Number of Holes | 2 |
| Internal Thread Size | M16 x 1,5 |
| Type | Solenoid Valve, retarder |
| Hole Spacing | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.46
Important compatibility info
| Width | 59 mm |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Weight | 3.2 kg |
| Inner diameter | 30 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Outer diameter | 69 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.47
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | without electric motor |
| Operating Mode | Electric |
| Paired article numbers | 180249 |
| Weight | 0.95 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£66.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023