Proud to be a UK-based company
Contact us
Important compatibility info
| Eject Force | 380 N |
| Function | Gas Spring, boot/cargo area |
| Mounting points diameter | 17.8 mm |
| Stroke | 172 mm |
| Weight | 0.3 kg |
| Housing Diameter | 18 mm |
| Piston conrod diameter | 8 mm |
| Type | Gas Spring, boot/cargo area |
| Housing length | 254.5 mm |
| Placement on Vehicle | both sides |
| Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.91
Important compatibility info
| Material | Cast Aluminium |
| Number of Teeth | 6 |
| Number of Wings | 5 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Weight | 2.162 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.91
Important compatibility info
| Weight | 0.419 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 154 |
| Timing Chain Size | G53HR |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.92
Important compatibility info
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.94
Important compatibility info
| Weight | 4.900 kg |
| Additional Information | with lock nut, with rubber mounts |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 23181 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.94
Important compatibility info
| Combi Switch Function | with indicator function, with wipe-wash function, with high beam function |
| Weight | 0.14 kg |
| Number of Connectors / Ports | 6 |
| Function | Steering Column Switch |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.95
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 300 mm. 190 mm |
| External Thread Size | M12 x 1,5, M16 x 2, M22 x 1,5 |
| Additional Information | without piston |
| Weight | 6.500 kg |
| Type | Bellow, air suspension |
| Thickness | 430 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.97
Important compatibility info
| Weight | 2.648 kg |
| Placement on Vehicle | Left |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.97
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| External Thread Size | M10 x 1,5 |
| Weight | 0.600 kg |
| for OE number | 22 11 6 861 406 |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.98
Important compatibility info
| Weight | 2.426 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| for OE number | 8172031 |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.01
Important compatibility info
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| Paired article numbers | 181524 |
| External Teeth, Diff.Side | 24 |
| Min. Length | 672 mm |
| Wheel Sided Joint Diameter | 88 mm |
| Transmission-side joint diameter | 83 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 28 |
| Weight | 6.340 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.01
Important compatibility info
| Weight | 0.808 kg |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Number of Chain Links | 150 |
| Type | Timing Chain Kit |
| Chain Type | Silent Chain, Closed chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (186275)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Guide, timing chain (36085)
£73.01
Important compatibility info
| Weight | 0.330 kg |
| Extra Description | febi Plus |
| Material | Plastic |
| Colour | Black |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (46518)
- 1x Febi Gasket, crankcase ventilation (44481)
- 1x Febi Hose, cylinder head cover ventilation (100463)
- 1x Febi Hose, cylinder head cover ventilation (100659)
- 4x Febi Screw (107188)
£73.01
Important compatibility info
| Voltage | 24 V |
| Weight | 1.632 kg |
| Type | Wiper Motor |
| Function | Wiper Motor |
| Additional Information 2 | with nut, with bolts/screws |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.01
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 8.520 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 303 mm |
| Thickness | 42.8 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 87 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.03
Important compatibility info
| Weight | 0.900 kg |
| Placement on Vehicle | Rear |
| Bolt Hole Circle Diameter | 110 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.03
Important compatibility info
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
| Number of Connectors / Ports | 8 |
| Weight | 0.1 kg |
| Type | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1839.H8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Weight | 1.600 kg |
| Placement on Vehicle | Right, Upper |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Upper, Front Axle Right |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Weight | 1.228 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30907)
- 1x Febi Nut (39199)
- 2x Febi Screw (32561)
- 2x Febi Nut (22263)
£73.04
Important compatibility info
| Function | Mounting, engine |
| Paired article numbers | 180772 |
| Placement on Vehicle | Left |
| Weight | 2.12 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Length | 875 mm |
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Weight | 8.5 kg |
| Cone Size | 30 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Extra Description | febi Plus |
| Weight | 0.214 kg |
| Number of Connectors / Ports | 2 |
| Function | Pressure converter, turbocharger |
| Type | Pressure converter, turbocharger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 81 mm |
| Outer diameter | 143 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Inner diameter | 30 mm |
| Weight | 3.482 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Left |
| Paired article numbers | 107121 |
| Function | Cable Repair Kit, tailgate |
| Number of circuits | 12 |
| Cable Length | 1250 mm |
| Extra Description | febi Plus |
| Type | Cable Repair Kit, tailgate |
| Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 193293 |
| Weight | 3.410 kg |
| Cone Size | 20 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 107684 |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 259 mm |
| Min. Length | 226 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Brake Disc |
| Surface | Coated |
| Minimum thickness | 19 mm |
| Bolt Hole Circle Diameter | 215 mm |
| Brake Disc Type | Solid |
| Outer diameter | 306 mm |
| Thickness | 136.5 mm |
| Weight | 13.7 kg |
| Rim Hole Number | 6 -Hole |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 22 mm |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Length | 850 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Weight | 7.65 kg |
| Pipe Diameter | 42 mm |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 31.5 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Window Regulator |
| Type | Window Regulator |
| Weight | 0.478 kg |
| Paired article numbers | 176798 |
| Operating Mode | Electric |
| Additional Information | without electric motor |
| Placement on Vehicle | Left Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 1.2 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 48 mm |
| Placement on Vehicle | Rear Axle Right |
| Weight | 4.1 kg |
| Inner diameter | 120 mm |
| Outer diameter | 180 mm |
| Function | Bearing / Wheel Bearing |
| Type | Bearing / Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Bearing Code | 33024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.700 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 07966 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£73.05
Important compatibility info
| Weight | 6.610 kg |
| Rod/Strut | Push Rod |
| Length | 895 mm |
| Cone Size | 24 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Outer diameter | 40 mm |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Top fork |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 380 mm |
| Weight | 1.6 kg |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 43 mm |
| External Thread Size | M14 x 2 |
| Min. Length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.567 kg |
| Type | Starter |
| Function | Starter |
| Voltage | 12 V |
| Rated Power | 1.4 kW |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 44621 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.89 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38701)
- 2x Febi Screw (44617)
- 2x Febi Nut (44618)
- 1x Febi Clamping Bolt, ball joint (17532)
- 1x Febi Nut (24361)
£73.05
Important compatibility info
| Weight | 3.63 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Outer diameter | 98 mm |
| Number of Holes | 10 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Width | 44 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter 1 | 75 mm |
| Outer diameter 2 | 145 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 4.635 kg |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174785 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Material | Steel |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.3 kg |
| Voltage | 12 V |
| for OE number | 020 911 023 FX |
| Rated Power | 1.1 kW |
| Number of Teeth | 9 |
| Function | Starter |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Paired article numbers | 07965 |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£73.05
Important compatibility info
| Weight | 2.7 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 275 mm |
| Min. Length | 149 mm |
| Pipe Diameter | 78 mm. 42 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 68 mm |
| Function | Wheel Bearing Kit |
| Outer diameter | 85 mm |
| Width | 47 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.094 kg |
| Inner diameter | 32 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 2 | 136 mm |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Inner diameter | 36 mm |
| Outer diameter 2 | 137 mm |
| Width | 39 mm |
| Outer diameter | 90 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.489 kg |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Outer diameter 1 | 70 mm |
| Bolt Hole Circle Diameter | 114 mm |
| Replaces | 31122 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 773 mm |
| Min. Length | 480 mm |
| Pipe Diameter | 76 mm. 63 mm |
| Mounting points diameter | 20 mm. 30 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Weight | 5.6 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Weight | 2.298 kg |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 173713 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 0.9 kW |
| Weight | 2.95 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.325 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Front Axle Left, Front |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
| Weight | 4.635 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 174786 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 2 |
| Weight | 5.755 kg |
| Steering arm type | Semi-Trailing Arm |
| Paired article numbers | 186639 |
| Additional Information | with crown nut and split pin, with rubber mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023