Important compatibility info
Weight | 6.200 kg |
Function | Centre Rod Assembly |
Pipe Diameter | 42 mm |
Cone Size | 26 mm |
Colour | Red |
Rod/Strut | Push Rod |
Outer diameter | 42 mm |
Length | 897 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 24 V |
Weight | 1.632 kg |
Type | Wiper Motor |
Function | Wiper Motor |
Additional Information 2 | with nut, with bolts/screws |
Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 175 mm |
Surface | Coated |
Function | Brake Disc |
Minimum thickness | 28 mm |
Number of Holes | 12 |
Brake Disc Type | Internally Vented |
Thickness | 119 mm |
Brake Disc Thickness | 34 mm |
Weight | 18.0 kg |
Placement on Vehicle | Rear Axle |
Outer diameter | 330 mm |
Internal Thread Size | M12 x 1,75 |
Type | Brake Disc |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Paired article numbers | 176520 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Weight | 1.26 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 03936 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Weight | 2.200 kg |
Placement on Vehicle | Front Axle Left, Upper |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Upper |
Weight | 1.55 kg |
Paired article numbers | 43134 |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Weight | 0.30 kg |
Number of Connectors / Ports | 2 |
Voltage | 12 V |
Material | Plastic |
for OE number | 64 11 9 197 085 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 30195 |
Weight | 2.230 kg |
Placement on Vehicle | Front Axle Left, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with bearing |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with lock nut |
External Thread Size | M14 x 1,5 |
Cone Size 2 | 22 mm |
Cone Size | 19.5 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.640 kg |
Placement on Vehicle | Lower Front Axle, Right |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 06792 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, without bearing |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (08570)
- 1x Febi Ball Joint (08571)
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Piston conrod diameter | 18 mm |
Function | Shock Absorber |
Min. Length | 431 mm |
Max. Length | 714 mm |
Pipe Diameter | 63 mm. 76 mm |
Mounting points diameter | 20 mm |
Weight | 4.9 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Inner diameter | 40 mm |
Additional Information 2 | with shaft seal, with retaining ring |
Outer diameter | 74 mm |
Width | 36 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Weight | 0.67 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 43133 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Cast Steel |
Placement on Vehicle | Front Axle Left, Upper |
Weight | 1.44 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Automatic |
Width of castor bearing surface | 32 mm |
Function | Belt Tensioner, V-ribbed belt |
Type | Belt Tensioner, V-ribbed belt |
Weight | 1.783 kg |
Outer diameter | 75 mm |
Material | Metal |
Width | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.915 kg |
External Thread Size | M24 x 1,5 |
Length | 927 mm |
Outer diameter | 50 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 50 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Min. Length | 464 mm |
Transmission-side joint diameter | 107.9 mm |
Wheel Sided Joint Diameter | 97.9 mm |
External Teeth, Wheel Side | 36 |
Number of mounting bores | 6 |
Weight | 6.014 kg |
Type | Drive Shaft |
Function | Drive Shaft |
Bore Diameter | 10.7 mm |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 94.1 mm |
Additional Information 2 | with nut |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Link/Coupling Rod, stabiliser bar |
Length | 590 mm |
Diameter | 120 mm |
Placement on Vehicle | 2nd rear axle |
Type | Link/Coupling Rod, stabiliser bar |
Rod/Strut | Coupling Rod |
Weight | 4.300 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.29 kg |
Material | PA (polyamide) |
Function | Oil Separator, crankcase ventilation |
Extra Description | febi Plus |
Type | Oil Separator, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Core Length | 370 mm |
Function | Heat Exchanger, interior heating |
Type | Heat Exchanger, interior heating |
Weight | 0.994 kg |
Additional Information | with gasket/seal |
Core Depth | 33 mm |
Core Width | 179 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.140 kg |
Additional Information | with fastening/mounting material, with gaskets/seals |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.154 kg |
Type | Cable Pull, manual transmission |
Function | Cable Pull, manual transmission |
Inner length 1 | 944 mm |
Outer length 2 | 1233 mm |
Inner length 2 | 965 mm |
Outer length 1 | 1253 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.370 kg |
Brake Type | Drum Brake |
Parameter | Typ 24 / 30 |
Stroke | 76 mm |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 270 mm |
Piston Rod Thread | M16 x 1,5 |
Function | Spring-loaded Cylinder |
Internal Thread Size | M16 x 1,5 |
Type | Spring-loaded Cylinder |
Replaces | 21898 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Housing, water pump |
Weight | 2.17 kg |
Type | Housing, water pump |
Material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with indicator function, with light dimmer function |
Weight | 0.26 kg |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 26 mm |
Pipe Diameter | 38 mm |
Placement on Vehicle | Front Axle |
Length | 1000 mm |
Rod/Strut | Push Rod |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
Weight | 6.15 kg |
External Thread Size | M20 x 1,5 |
Width | 52 mm |
Thickness | 115 mm |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Window Regulator |
Weight | 1.26 kg |
Paired article numbers | 176521 |
Operating Mode | Electric |
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 8 |
Function | Alternator Freewheel Clutch |
Weight | 0.46 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 222.5 mm |
Additional Information | with Thrust Bearing |
Additional Information 2 | with bearing |
Type | Repair Kit, kingpin |
Outer diameter | 50 mm |
Paired article numbers | 15901 |
Weight | 5.1 kg |
Function | Repair Kit, kingpin |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (15890)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (05868)
Important compatibility info
Additional Information 2 | with seal ring |
Number of Connectors / Ports | 2 |
Weight | 0.39 kg |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 533 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.11 kg |
Type | Clutch, radiator fan |
Function | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 20 mm |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with ball joint |
Material | Sheet Steel |
Weight | 3.047 kg |
Paired article numbers | 187796 |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 1 | 15.7 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.475 kg |
Width | 26 mm |
Outer diameter | 161 mm |
Inner diameter | 30 mm |
Number of Ribs | 4 |
Parameter | 5PK |
Function | Belt Pulley, crankshaft |
Additional Information 2 | with bolts/screws |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (26872)
- 4x Febi Centering Bolt, crankshaft pulley (33554)
Important compatibility info
Weight | 1.36 kg |
Placement on Vehicle | Front |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 56 84 102 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 1.971 kg |
for OE number | 11710-63J20 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 48 mm |
Weight | 1.70 kg |
Outer diameter | 81 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 39 mm |
Outer diameter | 203.2 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Weight | 2.210 kg |
Piston Diameter | 17.5 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Fill Medium | Brake Fluid |
Bore Diameter | 25 mm |
Weight | 0.375 kg |
Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Simplex, Closed chain |
Number of Chain Links | 112 |
Function | Timing Chain Kit |
Weight | 0.66 kg |
Type | Timing Chain Kit |
Timing Chain Size | G53HC, G53HR |
Extra Description | Basic Short Kit |
for OE number | 11 31 1 485 400 S1 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31803)
- 1x Febi Guide, timing chain (37586)
- 1x Febi Tensioner, timing chain (37587)
- 1x Febi Guide, timing chain (37588)
- 1x Febi Screw Plug, timing chain tensioner (37589)
Important compatibility info
Additional Information 2 | with lid |
Function | Timing Case Cover |
Weight | 1.35 kg |
Type | Timing Case Cover |
Extra Description | febi Plus |
for OE number | 2 487 002 SK1 |
Additional Information | with crankshaft seal |
Material | Sheet Steel, FKM (fluorocarbon rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.28 kg |
Placement on Vehicle | Right |
Paired article numbers | 24096 |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Belts | with rounded tooth profile |
Number of Teeth | 129 |
Function | Timing Belt Kit |
Weight | 0.650 kg |
Type | Timing Belt Kit |
Width | 25.4 mm |
for OE number | 1 000 156 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Tensioner Pulley, timing belt (11388)
- 1x Febi Timing Belt (19536)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (15177)
Important compatibility info
Weight | 6.958 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 4 -Hole |
Placement on Vehicle | Front Axle |
Outer diameter | 276 mm |
Thickness | 56.5 mm |
Brake Disc Thickness | 25 mm |
Bolt Hole Circle Diameter | 108 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.496 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 140 |
Timing Chain Size | Z53 |
Type | Timing Chain |
Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.982 kg |
Material | Aluminium |
Colour | Yellow |
Bearing/Mounting Type | Hydro Mount |
Placement on Vehicle | Right |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | PA (polyamide), Rubber/Metal |
Weight | 1.06 kg |
Placement on Vehicle | Right |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
for OE number | 22 11 7 935 142 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Minimum thickness | 21 mm |
Outer diameter | 294 mm |
Thickness | 85.5 mm |
Weight | 8.72 kg |
Rotor Style | Internally Vented |
Rim Hole Number | 8 -Hole |
Surface | Coated |
Bolt Hole Circle Diameter | 108 mm |
Mounting points diameter | 10.5 mm |
Function | Brake Disc |
Brake Disc Thickness | 24 mm |
Placement on Vehicle | Rear Axle |
Centering Diameter | 84 mm |
Type | Brake Disc Rotor |
Additional Information 2 | with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rotor Style | Solid |
Weight | 7.5 kg |
Placement on Vehicle | Front Axle |
Bolt Hole Circle Diameter | 118 mm |
Function | Brake Disc |
Rim Hole Number | 5 -Hole |
Surface | Coated |
Brake Disc Thickness | 16 mm |
Outer diameter | 290 mm |
Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
External Thread Size | M12 x 1,75 |
Weight | 2.490 kg |
Placement on Vehicle | Left |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Master Cylinder, clutch |
Weight | 0.160 kg |
Type | Master Cylinder, clutch |
Fill Medium | Brake Fluid |
Bore Diameter | 19 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.413 kg |
Steering arm type | Control Arm |
Paired article numbers | 182052 |
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Additional Information 2 | without ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 20 mm |
Type | Control/Trailing Arm, wheel suspension |
Weight | 5.987 kg |
Paired article numbers | 186317 |
Placement on Vehicle | Front Axle Left |
Material | Sheet Steel |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023