Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Electric Motor, window regulator |
| Type | Electric Motor, window regulator |
| Number of Connectors / Ports | 6 |
| Extra Description | febi Plus |
| Weight | 0.610 kg |
| Placement on Vehicle | Left |
| Paired article numbers | 175017 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Weight | 0.2 kg |
| Extra Description | febi Plus |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Exhaust Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Type | Brake Caliper |
| Weight | 5.5 kg |
| Paired article numbers | 183318 |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Material | Cast Iron |
| Placement on Vehicle | Front Axle Left |
| Brake caliper piston diameter | 43 mm |
| Function | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 2.260 kg |
| Placement on Vehicle | Front Axle, Wheel Side |
| Type | Joint Kit, drive shaft |
| Function | Joint Kit, drive shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, drive shaft (33277)
- 1x Febi Bellow, drive shaft (14908)
- 1x Febi Clamping Clip (38765)
- 1x Febi Clamping Clip (38758)
- 1x Febi Molybdenum Grease (02582)
£68.10
Important compatibility info
| Material | Rubber/Metal |
| Number of Holes | 6 |
| Additional Information | with nuts |
| Additional Information 2 | with bolts/screws, with washers |
| Function | Joint, propshaft |
| Extra Description | ProKit |
| Weight | 1.0 kg |
| Type | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (49544)
- 3x Febi Screw (01696)
- 3x Febi Nut (19104)
- 3x Febi Washer (19107)
£68.10
Important compatibility info
| Weight | 6.927 kg |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Cone Size | 32 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M27 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Additional Information | with lock nut, with rubber mounts |
| Weight | 2.65 kg |
| Placement on Vehicle | Upper, Front Axle Right |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 107864 |
| Cone Size | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Bearing Type | Angular Ball Bearing |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 136 mm |
| Outer diameter | 136 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Bolt Hole Circle Diameter | 64 mm |
| Inner diameter | 30 mm |
| Number of Holes | 6 |
| Weight | 3.88 kg |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Brake caliper piston diameter | 43 mm |
| Weight | 5.5 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (4 pistons) |
| Paired article numbers | 183317 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Function | Auxiliary water pump (cooling water circuit) |
| Material | Plastic |
| Voltage | 12 V |
| Type | Auxiliary water pump (cooling water circuit) |
| Weight | 0.18 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 1.126 kg |
| Function | Wiper Motor |
| Number of Connectors / Ports | 5 |
| Voltage | 12 V |
| Placement on Vehicle | Front |
| Type | Wiper Motor |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 2.65 kg |
| Material | Steel |
| Placement on Vehicle | Upper, Front Axle Left |
| Steering arm type | Control Arm |
| Paired article numbers | 107863 |
| Cone Size | 14 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M12 x 1,75 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 6.731 kg |
| Type | Cylinder Liner |
| Function | Cylinder Liner |
| for OE number | 51.01201.0468 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Outer diameter | 24 mm |
| Function | Tie Rod |
| Length | 897 mm |
| Steering | with tie rod ends |
| External Thread Size | M12 x 1,5 |
| Type | Tie Rod |
| Thread Length | 17 mm |
| Weight | 4.5 kg |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| Weight | 9.354 kg |
| External Teeth, Diff.Side | 36 |
| Min. Length | 797 mm |
| ABS Ring Diameter | 105 mm |
| Wheel Sided Joint Diameter | 100 mm |
| Transmission-side joint diameter | 92.2 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 1.951 kg |
| Outer diameter | 345 mm |
| Voltage | 12 V |
| Rated Power | 350 W |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Housing length | 333 mm |
| Mounting points diameter | 18 mm |
| Weight | 0.72 kg |
| Placement on Vehicle | both sides |
| Length | 523 mm |
| Eject Force | 710 N |
| Stroke | 148 mm |
| Housing Diameter | 30 mm |
| Piston conrod diameter | 8 mm |
| Function | Gas Spring, boot/cargo area |
| Type | Gas Spring, boot/cargo area |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Weight | 1.200 kg |
| Width | 384 mm |
| Length | 328 mm |
| Height | 34 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Extra Description | febi Plus |
| Function | Oil sump, automatic transmission |
| Filter type | Screen Filter |
| Type | Oil sump, automatic transmission |
| Transmission Type | Automatic Transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Length | 1180 mm |
| Number of Ribs | 6 |
| Weight | 0.72 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28931)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
£68.10
Important compatibility info
| Weight | 7.8 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42294 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 2.205 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 361 mm |
| Core Width | 485 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 7.8 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 42293 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 0.719 kg |
| Operating Mode | Automatic |
| Function | V-Ribbed Belt Set |
| Track rollers material | Plastic |
| Additional Information 2 | with tensioner element |
| Outer diameter | 65 mm |
| Type | V-Ribbed Belt Set |
| Width of castor bearing surface | 26 mm |
| Length | 1163 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Number of Ribs | 6 |
| Housing material | Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28930)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
£68.10
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 5.2 kg |
| Placement on Vehicle | Front Axle |
| Length | 600 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Adjustable | not adjustable |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 4.665 kg |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 337 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 80 mm. 42 mm |
| Mounting points diameter | 25 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Seal Material | Rubber |
| Additional Information | with gasket/seal |
| Material | Cast Aluminium |
| Weight | 1.0 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Type | Shock Absorber, driver cab suspension |
| Weight | 1.5 kg |
| Operating Mode | Pneumatic |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Piston Diameter | 16 mm |
| Pipe Diameter | 44 mm |
| Mounting points diameter | 14 mm |
| External Thread Size | M12 x 1,75 |
| Max. Length | 344 mm |
| Min. Length | 254 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 0.309 kg |
| Length | 1015 mm |
| Height | 14 mm |
| Width | 325 mm |
| Mounting points diameter | 13 mm |
| Function | Gasket, oil sump |
| Type | Gasket, oil sump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 1.516 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21446 |
| Additional Information | with rubber mounts |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Inner diameter | 31 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Width | 54 mm |
| Weight | 3.970 kg |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
| Outer diameter | 92 mm |
| Outer diameter 2 | 139 mm |
| Outer diameter 1 | 69 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172777)
£68.10
Important compatibility info
| Operating Mode | Mechanical |
| Function | Coolant Control Valve |
| Type | Coolant Control Valve |
| Weight | 0.1 kg |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Material | Aluminium |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Weight | 0.591 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 25 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 21445 |
| Placement on Vehicle | Front Axle Right, Upper |
| Weight | 1.503 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Inner diameter | 95 mm |
| Outer diameter | 170 mm |
| Placement on Vehicle | inner, Rear Axle |
| Weight | 4.037 kg |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Width | 46 mm |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Type | Timing Chain |
| Function | Timing Chain |
| Number of Chain Links | 100 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Upper |
| Weight | 0.297 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Outer diameter | 52 mm |
| Length | 1059 mm |
| Weight | 10.000 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.10
Important compatibility info
| Weight | 1.500 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 50508653 |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.11
Important compatibility info
| Weight | 3.35 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 32072 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.11
Important compatibility info
| Outer diameter | 32 mm |
| Opening Temperature | 98 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Weight | 0.24 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.11
Important compatibility info
| Weight | 2.39 kg |
| Piston Diameter | 19.1 mm |
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 180 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.11
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Lower |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 196951 |
| Weight | 4.55 kg |
| Cone Size | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Cone Size 2 | 24 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174227)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£68.14
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 196950 |
| Weight | 4.55 kg |
| Cone Size | 17.5 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Cone Size 2 | 24 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174226)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£68.14
Important compatibility info
| Weight | 0.550 kg |
| Length | 88 mm |
| Outer diameter | 31 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
| Placement on Vehicle | Front and Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.16
Important compatibility info
| Paired article numbers | 182067 |
| Weight | 2.065 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Rear Axle Left, Upper |
| Additional Information 2 | with bearing |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.16
Important compatibility info
| Weight | 1.8 kg |
| Additional Information | with gasket/seal |
| Material | Aluminium |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.17
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.04 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 315 mm |
| Thickness | 47.2 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.18
Important compatibility info
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.663 kg |
| Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.23
Important compatibility info
| Weight | 2.14 kg |
| Material | Cast Aluminium |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Paper |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.25
Important compatibility info
| Weight | 0.980 kg |
| Belts | with rounded tooth profile |
| Function | Timing Belt Kit |
| Width 1 | 19 mm |
| Replaces | 26184 |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
| Number of Teeth 2 | 163 |
| Number of Teeth 1 | 99 |
| Width 2 | 25.4 mm |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26113)
- 1x Febi Tensioner Pulley, timing belt (10620)
- 1x Febi Timing Belt (11145)
- 1x Febi Tensioner Pulley, timing belt (15279)
£68.25
Important compatibility info
| Weight | 7.980 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 320 mm |
| Thickness | 68 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£68.27
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023