Important compatibility info
Weight | 1.64 kg |
Placement on Vehicle | Right Front |
Length | 183 mm |
Width | 121 mm |
Thickness | 131 mm |
Paired article numbers | 30627 |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Replaces | 27416 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.55 kg |
Number of Wings | 8 |
Function | Water Pump, engine cooling |
Water pump impeller material | Metal |
Seal Material | Paper |
Additional Information | with gasket/seal |
Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.159 kg |
Number of Connectors / Ports | 5 |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
for OE number | 08 36 584 |
Housing Type | with housing |
Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.5 kg |
Placement on Vehicle | Left |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Timing Chain Kit |
Weight | 0.475 kg |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 96 |
Type | Timing Chain Kit |
for OE number | 06K 109 158 BS S4 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45953)
- 1x Febi Tensioner, timing chain (101796)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
- 1x Febi Guide, timing chain (49535)
Important compatibility info
Function | Parts Set, maintenance service |
Weight | 1.001 kg |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (32910)
- 1x Febi Air filter kit (32507)
- 1x Febi Fuel filter (26258)
- 1x Febi Screw Plug, oil sump (08277)
- 1x Febi Seal Ring, oil drain plug (07215)
Important compatibility info
Length | 460 mm |
Outer diameter | 238 mm. 131 mm |
Material | CR (chloroprene rubber) |
Function | Bellow, air suspension |
Weight | 2.100 kg |
Type | Bellow, air suspension |
Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
for OE number | 1S0 199 262 |
Type | Mounting, engine |
Weight | 0.89 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right |
Material | PA (polyamide), Rubber/Metal |
Bearing/Mounting Type | Hydro Mount |
Function | Mounting, engine |
Weight | 0.89 kg |
Type | Mounting, engine |
for OE number | 22 11 6 856 184 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Bolt Hole Circle Diameter | 64 mm |
Inner diameter | 29 mm |
Weight | 3.4 kg |
Outer diameter | 136 mm |
Width | 88 mm |
Bearing Type | Angular Ball Bearing |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 0.8 kW |
Weight | 3.08 kg |
for OE number | 46548653 |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.075 kg |
Placement on Vehicle | Front Axle |
Length | 738 mm |
Outer diameter | 40 mm |
Thickness | 103 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Function | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 15 01 009 34R |
Additional Information 2 | with gear |
Weight | 0.947 kg |
Type | Oil Pump |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 39.5 mm |
Number of Ribs | 7 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Weight | 0.475 kg |
Type | Alternator Freewheel Clutch |
Outer diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.335 kg |
Function | Steering Column Switch |
Length | 234 mm |
Voltage | 24 V |
Number of Connectors / Ports | 14 |
Combi Switch Function | with indicator function, with light dimmer function, with cruise control |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Weight | 2.34 kg |
Cone Size | 25 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width of castor bearing surface | 48 mm |
Weight | 1.70 kg |
Outer diameter | 81 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Weight | 3.150 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Paired article numbers | 19991 |
Material | Sheet Steel |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | without holder |
Additional Information 2 | with rubber mount, without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 100 mm |
Wheel Sided Joint Diameter | 89 mm |
Additional Information 2 | with nut |
Thread Size | M16x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 5.700 kg |
Min. Length | 546 mm |
Placement on Vehicle | Front Axle Left |
Additional Information | with grease |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 380 N |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 17.8 mm |
Stroke | 172 mm |
Weight | 0.3 kg |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Housing length | 254.5 mm |
Placement on Vehicle | both sides |
Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023