Important compatibility info
Number of Connectors / Ports | 2 |
Weight | 0.05 kg |
for OE number | 011 542 23 18 64 |
Type | Sensor, exhaust gas temperature |
Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 194740 |
Number of Connectors / Ports | 2 |
Weight | 0.580 kg |
Type | Control Element, parking brake caliper |
Placement on Vehicle | Rear Axle Left |
Function | Control Element, parking brake caliper |
Extra Description | febi Plus |
Number of Teeth | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Height | 162 mm |
Material | Paper |
Outer diameter | 111 mm |
Filter type | In-Line Filter |
Weight | 0.675 kg |
Pipe Diameter | 8 mm. 9.5 mm |
Type | Fuel filter |
Function | Fuel filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Paired article numbers | 186460 |
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Function | Control/Trailing Arm, wheel suspension |
Material | Sheet Steel |
Placement on Vehicle | Rear Axle Left |
Type | Control/Trailing Arm, wheel suspension |
Weight | 1.954 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Driver Position | for right-hand drive vehicles |
Type | Cable Pull, manual transmission |
Weight | 1.426 kg |
Inner length 2 | 868 mm |
Function | Cable Pull, manual transmission |
for OE number | 1 774 307 |
Inner length 1 | 830 mm |
Outer length 1 | 1213 mm |
Outer length 2 | 1203 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.860 kg |
Additional Information 2 | with screw |
Width | 29 mm |
Outer diameter | 146 mm |
Inner diameter | 14 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (34846)
- 1x Febi Pulley Bolt (33681)
Important compatibility info
Weight | 2.04 kg |
Height | 41 mm |
Outer diameter | 167 mm |
Inner diameter | 46 mm |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Bushing, axle beam |
Weight | 1.300 kg |
Inner diameter | 30 mm |
Thickness | 95 mm |
Outer diameter | 125 mm |
Material | Rubber/Metal |
Placement on Vehicle | Front, Rear Axle Left, Rear Axle Right |
Function | Bushing, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle |
Shock Absorber Type | Oil Pressure |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 679 mm |
Min. Length | 416 mm |
Pipe Diameter | 53 mm. 45 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 12.5 mm |
Function | Shock Absorber |
Weight | 1.85 kg |
Type | Shock Absorber |
Shock Absorber Design | Telescopic Shock Absorber |
Replaces | 20024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.15 kg |
Function | Repair Kit, automatic adjustment |
Type | Repair Kit, automatic adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 11 |
Rated Power | 1.4 kW |
Weight | 2.8 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 3 |
Function | Coolant Control Valve |
Weight | 0.696 kg |
Extra Description | febi Plus |
Type | Coolant Control Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 30 |
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Function | Drive Shaft |
Weight | 7.124 kg |
External Teeth, Diff.Side | 27 |
Min. Length | 617 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 91.7 mm |
Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Outer |
Width | 54.3 mm. 76.15 mm |
Outer diameter | 85 mm |
Thickness | 30 mm |
Steering arm type | for triangular control arm (CV) |
Bolt Hole Circle Diameter | 21 mm |
Function | Repair Kit, control/trailing arm |
Weight | 5.11 kg |
for OE number | 21295230 |
Type | Repair Kit, control/trailing arm |
Additional Information 2 | with spacer disc, with retaining ring |
Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 2x Febi Repair Kit, control/trailing arm (27570)
Important compatibility info
Weight | 0.544 kg |
Number of Connectors / Ports | 2 |
for OE number | 6Q1 423 893 M |
External Thread Size | M14 x 1,5 |
Function | Hydraulic Hose, steering |
Type | Hydraulic Hose, steering |
Driver Position | for left-hand drive vehicles |
for steering gear manufacturer | SMI-KOYO |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.478 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 3 |
Valve type | Solenoid Valve |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Cone Size | 23.7 mm |
Weight | 2.925 kg |
Paired article numbers | 176677 |
Steering arm type | Control Arm |
Additional Information 2 | with ball joint, with bearing |
Material | Aluminium |
Additional Information | with fastening/mounting material |
Placement on Vehicle | Front Axle Right, Lower, Front |
External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174778)
- 1x Febi Bolt, control arm (40158)
- 2x Febi Washer (21558)
- 1x Febi Nut (21557)
Important compatibility info
Brake Disc Thickness | 28 mm |
Placement on Vehicle | Front Axle |
Minimum thickness | 26 mm |
Function | Brake Disc |
Bolt Hole Circle Diameter | 139.7 mm |
Centering Diameter | 108 mm |
Surface | Coated |
Number of mounting bores | 2 |
Outer diameter | 319 mm |
Thickness | 67.2 mm |
Rotor Style | Internally Vented |
Rim Hole Number | 6 -Hole |
Type | Brake Disc Rotor |
Weight | 8.450 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.702 kg |
Chain Type | Simplex, Closed chain |
Number of Chain Links | 90 |
Timing Chain Size | G67HP, G67HR |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Additional Information | with chain tensioner, with slide rails |
for OE number | 24361-2F000 S1 |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (31073)
- 1x Febi Tensioner, timing chain (170581)
- 1x Febi Guide, timing chain (170578)
- 1x Febi Guide, timing chain (170583)
Important compatibility info
Type | Wheel Bearing Kit |
Bearing Type | Angular Ball Bearing |
Inner diameter | 40 mm |
Additional Information 2 | with shaft seal, with retaining ring |
Outer diameter | 74 mm |
Width | 36 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Function | Wheel Bearing Kit |
Weight | 0.67 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 164 mm |
Additional Information 2 | with ball bearing |
Inner diameter | 30 mm |
Weight | 0.323 kg |
Bearing Type | Ball Bearing |
Type | Suspension, propshaft |
Function | Suspension, propshaft |
Hole Spacing | 135 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1130 mm |
Number of Ribs | 7 |
Tensile Cord Material | Polyester |
Weight | 0.715 kg |
Type | V-Ribbed Belt Set |
Function | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28926)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
Important compatibility info
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Weight | 0.30 kg |
Number of Connectors / Ports | 2 |
Voltage | 12 V |
Material | Plastic |
for OE number | 64 11 9 197 085 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.602 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
for OE number | 31251653 |
Width of castor bearing surface | 20.5 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.66 kg |
Inner diameter | 30 mm |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Outer diameter | 143 mm |
Number of Ribs | 5 |
Thickness | 29.5 mm |
Type | Belt Pulley, crankshaft |
for OE number | 06F 105 243 J |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Shoe Set |
Brake Pad | without lining |
Placement on Vehicle | Front Axle, Rear Axle |
Width | 200 mm |
Weight | 13.0 kg |
Thickness | 8 mm |
for OE number | 3095196 |
Type | Brake Shoe Set |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (12220)
- 1x Febi Brake Shoe (12219)
Important compatibility info
Weight | 1.31 kg |
Function | Parts Set, maintenance service |
Type | Parts Set, maintenance service |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Filter (26686)
- 1x Febi Air Filter (27030)
- 6x Febi Spark Plug (13518)
- 1x Febi Fuel filter (12650)
- 1x Febi Screw Plug, oil sump (06564)
- 1x Febi Filter Set, cabin air (12264)
Important compatibility info
Paired article numbers | 14226 |
Steering arm type | Control Arm |
Placement on Vehicle | Upper Front Axle, Left |
Material | Aluminium |
Function | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Weight | 2.275 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.140 kg |
Additional Information | with fastening/mounting material, with gaskets/seals |
Type | Water Pump, engine cooling |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | Mirror Adjustment, Window Regulator |
Number of Connectors / Ports | 7 |
Placement on Vehicle | Driver side |
Weight | 0.102 kg |
Extra Description | febi Plus |
Type | Multi-Function Switch |
Function | Multi-Function Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.82 kg |
Function | Ignition Coil |
Ignition Coil | 3 Spark |
Number of Connectors / Ports | 5 |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Window Regulator |
Paired article numbers | 176520 |
Operating Mode | Electric |
Additional Information | without electric motor |
Placement on Vehicle | Left Front |
Weight | 1.26 kg |
Type | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.33 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 328 mm |
Min. Length | 167 mm |
Pipe Diameter | 41.5 mm |
Mounting points diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.472 kg |
Operating Mode | Electric |
Number of Connectors / Ports | 2 |
Valve type | Solenoid Valve |
Type | Coolant Control Valve |
Function | Coolant Control Valve |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 6 |
Function | Ignition Coil |
Weight | 0.56 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Combi Switch Function | with indicator function, with high beam function, with rear fog light function, with fog-lamp function |
Function | Steering Column Switch |
Weight | 0.100 kg |
Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.2 kg |
Placement on Vehicle | Front Axle |
Length | 203 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Cone Size | 26 mm |
Pipe Diameter | 38 mm |
Placement on Vehicle | Front Axle |
Length | 1000 mm |
Rod/Strut | Push Rod |
Extra Description | ProKit |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
Weight | 6.15 kg |
External Thread Size | M20 x 1,5 |
Width | 52 mm |
Thickness | 115 mm |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.08 kg |
Placement on Vehicle | Left |
Material | Aluminium, Rubber/Metal, Plastic |
Bearing/Mounting Type | Hydro Mount |
Type | Mounting, engine |
Function | Mounting, engine |
for OE number | 22 11 6 859 845 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.320 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 53 mm |
Outer diameter | 74 mm |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 9.370 kg |
Brake Type | Drum Brake |
Parameter | Typ 24 / 30 |
Stroke | 76 mm |
Distance of fastening bolts | 120 mm |
Piston Rod Length | 270 mm |
Piston Rod Thread | M16 x 1,5 |
Function | Spring-loaded Cylinder |
Internal Thread Size | M16 x 1,5 |
Type | Spring-loaded Cylinder |
Replaces | 21898 |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rod/Strut | Coupling Rod |
Diameter 2 | 15 mm |
Weight | 3.4 kg |
Cone Size | 26 mm |
Pipe Diameter | 36 mm |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle |
Length | 293 mm |
Thickness | 36 mm |
Diameter 1 | 15 mm |
External Thread Size | M20 x 1,5 |
Hole Spacing | 90 mm |
Extra Description | ProKit |
Type | Link/Coupling Rod, stabiliser bar |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 1153 mm |
Number of Ribs | 6 |
Function | V-Ribbed Belt Set |
Type | V-Ribbed Belt Set |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Tensile Cord Material | Polyester |
Weight | 0.788 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (28929)
- 1x Febi Belt Tensioner, v-ribbed belt (44980)
Important compatibility info
Type | Window Regulator |
Weight | 1.26 kg |
Paired article numbers | 176521 |
Operating Mode | Electric |
Placement on Vehicle | Right Front |
Additional Information | without electric motor |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.915 kg |
External Thread Size | M24 x 1,5 |
Length | 927 mm |
Outer diameter | 50 mm |
Rod/Strut | Push Rod |
Cone Size | 30 mm |
Pipe Diameter | 50 mm |
Function | Centre Rod Assembly |
Internal Thread Size | M30 x 1,5 |
Extra Description | ProKit |
Additional Information | with nuts |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Length | 773 mm |
Rod/Strut | Push Rod |
Weight | 6.800 kg |
Adjustable | adjustable |
Pipe Diameter | 42 mm |
Type | Centre Rod Assembly |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Type | Wheel Bearing Kit |
Bolt Hole Circle Diameter | 112 mm |
Outer diameter 2 | 143 mm |
Width | 64 mm |
Placement on Vehicle | Rear Axle |
Replaces | 36487 |
Function | Wheel Bearing Kit |
Bearing Type | Double Row |
Weight | 3.267 kg |
Outer diameter 1 | 67 mm |
Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Outer diameter | 71 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 30194 |
Cone Size 2 | 22 mm |
Cone Size | 19.5 mm |
Additional Information | with lock nut |
Placement on Vehicle | Lower, Front Axle Right, Front |
Weight | 2.169 kg |
Function | Control/Trailing Arm, wheel suspension |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with bearing, with ball joint |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 55 mm |
Inner diameter | 17 mm |
Number of Ribs | 8 |
Function | Alternator Freewheel Clutch |
Weight | 0.46 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with Split Pin |
Additional Information 2 | with nut |
Thread Size | M24x1,5 |
Paired article numbers | 181524 |
External Teeth, Diff.Side | 24 |
Min. Length | 672 mm |
Wheel Sided Joint Diameter | 88 mm |
Transmission-side joint diameter | 83 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
External Teeth, Wheel Side | 28 |
Weight | 6.340 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023