Proud to be a UK-based company
Contact us
Important compatibility info
| Paired article numbers | 173714 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Placement on Vehicle | Lower, Front Axle Left |
| Weight | 2.298 kg |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Additional Information | with fastening/mounting material |
| Width | 50 mm |
| Inner diameter | 49 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with ABS sensor ring |
| Weight | 1.824 kg |
| Outer diameter | 92 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.5 kg |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)
£72.06
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 1.2 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter 1 | 68 mm |
| Function | Wheel Bearing Kit |
| Outer diameter | 85 mm |
| Width | 47 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Weight | 3.094 kg |
| Inner diameter | 32 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
| Outer diameter 2 | 136 mm |
| Additional Information | with axle nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Paired article numbers | 181129 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 3.882 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Paired article numbers | 07965 |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£72.06
Important compatibility info
| Additional Information | with lock nut |
| External Thread Size | M14 x 1,5 |
| Weight | 2.298 kg |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with bearing |
| Steering arm type | Control Arm |
| Paired article numbers | 173713 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.06
Important compatibility info
| Material | Rubber/Metal |
| Thickness | 95 mm |
| Weight | 0.803 kg |
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Weight | 1.39 kg |
| Placement on Vehicle | Upper, Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 107851 |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107850)
- 1x Febi Nut (47776)
£72.07
Important compatibility info
| Weight | 1.06 kg |
| Placement on Vehicle | Left |
| Material | Aluminium, Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.07
Important compatibility info
| Weight | 0.883 kg |
| Placement on Vehicle | Rear |
| Number of Connectors / Ports | 4 |
| Function | Wiper Motor |
| Voltage | 12 V |
| Type | Wiper Motor |
| for OE number | 5K6 955 711 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.08
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 8.05 kg |
| Placement on Vehicle | Rear Axle |
| Brake Disc Thickness | 23 mm |
| Minimum thickness | 21 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 67.5 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Thickness | 44.8 mm |
| Outer diameter | 315 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.08
Important compatibility info
| Hole Spacing | 44 mm |
| Weight | 1.83 kg |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber), Metal |
| Outer diameter | 176 mm |
| Thickness | 34 mm |
| Inner diameter | 31 mm. 8 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.09
Important compatibility info
| Voltage | 12 V |
| Operating Mode | Electric-pneumatic |
| Function | Boost Pressure Control Valve |
| Extra Description | febi Plus |
| Type | Boost Pressure Control Valve |
| Weight | 0.080 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.11
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 33 |
| Weight | 6.319 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 587 mm |
| Wheel Sided Joint Diameter | 84 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.11
Important compatibility info
| Type | Camshaft |
| Weight | 1.728 kg |
| Paired article numbers | 176837 |
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.12
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 905 mm |
| Additional Information | with nuts |
| Rod/Strut | Push Rod |
| Weight | 7.200 kg |
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.13
Important compatibility info
| Height | 68 mm |
| Outer diameter | 186 mm |
| Inner diameter | 80 mm |
| Weight | 0.4 kg |
| Type | Filter, crankcase ventilation |
| Function | Filter, crankcase ventilation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.13
Important compatibility info
| Weight | 10.0 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 305 mm |
| Thickness | 77.9 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 90 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.15
Important compatibility info
| Width of castor bearing surface | 23 mm |
| Outer diameter | 70 mm |
| Material | Metal |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.113 kg |
| Operating Mode | Automatic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.16
Important compatibility info
| Rim Hole Number | 4 -Hole |
| Rotor Style | Solid |
| Placement on Vehicle | Front Axle |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 130 mm |
| Minimum thickness | 8 mm |
| Brake Disc Thickness | 9.5 mm |
| Outer diameter | 278 mm |
| Thickness | 83.8 mm |
| Centering Diameter | 39.8 mm |
| Weight | 6.4 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.17
Important compatibility info
| Outer length 2 | 1017 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 800 mm |
| Weight | 0.838 kg |
| Outer length 1 | 1197 mm |
| Inner length 1 | 937 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.18
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 3.801 kg |
| Additional Information | without piston |
| Type | Bellow, air suspension |
| External Thread Size | M7 x 1, M10 x 1,5 |
| for OE number | 5 0004 2666 |
| Outer diameter | 228 mm |
| Thickness | 325 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.19
Important compatibility info
| Weight | 2.0 kg |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 1839.H8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.20
Important compatibility info
| Weight | 8.88 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 52.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 18558 |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.20
Important compatibility info
| Weight | 1.220 kg |
| for OE number | 11360-JD01B |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.22
Important compatibility info
| Weight | 1.100 kg |
| Width | 23 mm |
| Number of Teeth | 150 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| for OE number | 06B 198 119 A |
| Belts | with rounded tooth profile |
| Additional Information 2 | with screw |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Belt Material | HNBR (hydrogenated nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (19546)
- 1x Febi Tensioner Pulley, timing belt (18554)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (19292)
£72.24
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Weight | 0.057 kg |
| Cable Length | 774 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.24
Important compatibility info
| Weight | 2.35 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear Axle |
| Function | Shock Absorber |
| Mounting points diameter | 14 mm |
| Min. Length | 378 mm |
| Shock Absorber Type | Oil Pressure |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 626 mm |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£72.25
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023