Important compatibility info
Weight | 1.038 kg |
Additional Information | without kingpin |
Outer diameter | 54 mm |
Additional Information 2 | with bearing |
Paired article numbers | 15856 |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
- 1x Febi Bush, steering knuckle (15889)
Important compatibility info
Weight | 0.714 kg |
for OE number | 5 0429 4640 |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 39.5 mm |
Number of Ribs | 7 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Additional Information 2 | with lid |
Weight | 0.475 kg |
Type | Alternator Freewheel Clutch |
Outer diameter | 66 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Transmission-side joint diameter | 74.5 mm |
Paired article numbers | 182854 |
Placement on Vehicle | Front Axle Right |
Thread Size | M22x1,5 |
External Teeth, Wheel Side | 26 |
Weight | 8.418 kg |
Function | Drive Shaft |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 79 mm |
Min. Length | 884 mm |
External Teeth, Diff.Side | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Pipe, EGR valve |
Function | Pipe, EGR valve |
Weight | 0.2 kg |
for OE number | 03L 131 521 Q |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 850 mm |
Outer diameter | 42 mm |
Rod/Strut | Push Rod |
Weight | 7.65 kg |
Pipe Diameter | 42 mm |
Driver Position | for right-hand drive vehicles |
Cone Size | 31.5 mm |
Function | Centre Rod Assembly |
Extra Description | ProKit |
External Thread Size | M24 x 1,5, M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Weight | 1.13 kg |
Length | 370 mm |
Height | 188 mm |
Width | 42 mm |
Number of Connectors / Ports | 2 |
Type | Heat Exchanger, interior heating |
Function | Heat Exchanger, interior heating |
Core Length | 188 mm |
Core Width | 370 mm |
Core Depth | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.555 kg |
Outer diameter | 430 mm |
Paired article numbers | 17852 |
Number of Wings | 5 |
Function | Fan Wheel, engine cooling |
Type | Fan Wheel, engine cooling |
for OE number | 102 200 21 23 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.75 kg |
External Thread Size | M14 x 1,5 |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 276 mm |
Min. Length | 237 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 14 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.990 kg |
Type | Oil Cooler, automatic transmission |
Function | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Weight | 2.996 kg |
Placement on Vehicle | Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 173585 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size | 17.4 mm |
Additional Information | with rubber mounts, with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.5283 kg |
Extra Description | febi Plus |
Function | Oil Separator, crankcase ventilation |
Type | Oil Separator, crankcase ventilation |
Colour | Black |
Material | Plastic |
Additional Information | with venting hoses |
for OE number | 06H 103 495 AJ S2 |
Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (176317)
- 1x Febi Hose, crankcase ventilation (109552)
- 1x Febi Hose, crankcase ventilation (170674)
Important compatibility info
Weight | 0.1885 kg |
Cable Length | 460 mm |
Number of Connectors / Ports | 2 |
Voltage | 24 V |
Pump Type | Mono Pump |
Function | Washer Fluid Pump, window cleaning |
Type | Washer Fluid Pump, window cleaning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.93 kg |
Placement on Vehicle | Front Axle Right, Rear |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 36328 |
Inner diameter 1 | 14 mm |
Inner diameter 2 | 14 mm |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (34175)
- 1x Febi Mounting, control/trailing arm (34176)
- 1x Febi Nut (36331)
Important compatibility info
External Thread Size | M24 x 1,5 |
Extra Description | ProKit |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Cone Size | 32 mm |
Material | Steel |
Diameter | 230 mm |
Length | 343 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Weight | 4.400 kg |
Diameter 1 | 38 mm |
Rod/Strut | Coupling Rod |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.38 kg |
Additional Information 2 | with bolts/screws, with switch |
Function | Steering Lock |
Type | Steering Lock |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Paired article numbers | 107121 |
Function | Cable Repair Kit, tailgate |
Number of circuits | 12 |
Cable Length | 1250 mm |
Extra Description | febi Plus |
Type | Cable Repair Kit, tailgate |
Additional Information | with squeeze connector |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 50 mm |
Outer diameter | 90 mm |
Mounting points diameter | 23 mm |
Type | Deflection/Guide Pulley, V-ribbed belt |
Function | Deflection/Guide Pulley, V-ribbed belt |
Material | Metal |
Width of castor bearing surface | 38 mm |
Weight | 1.779 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.075 kg |
Placement on Vehicle | Front Axle |
Length | 738 mm |
Outer diameter | 40 mm |
Thickness | 103 mm |
Rod/Strut | Push Rod |
Cone Size | 26 mm |
Function | Centre Rod Assembly |
External Thread Size | M20 x 1,5 |
Internal Thread Size | M30 x 1,5 RHT |
Driver Position | for left-hand/right-hand drive vehicles |
Extra Description | ProKit |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Sheet Steel |
Steering arm type | Control Arm |
Paired article numbers | 41809 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Weight | 3.45 kg |
Additional Information 2 | with ball joint |
Replaces | 41727 |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Mechanical |
Weight | 2.0 kg |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Placement on Vehicle | Rear |
Max. Length | 224 mm |
Min. Length | 208 mm |
Pipe Diameter | 40 mm |
Mounting points diameter | 12 mm. 18 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 42 mm |
Additional Information | with nuts |
Function | Centre Rod Assembly |
Type | Centre Rod Assembly |
Length | 785 mm |
Placement on Vehicle | Rear |
Cone Size | 26 mm |
Weight | 6.700 kg |
Extra Description | ProKit |
Rod/Strut | Push Rod |
Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.45 kg |
Placement on Vehicle | Front Axle Right, Lower |
Material | Steel |
Steering arm type | Control Arm |
Paired article numbers | 41808 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint, with rubber mount |
Replaces | 41728; 41850 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.900 kg |
Additional Information | with lock nut, with rubber mounts |
Placement on Vehicle | Front Axle Right, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 23181 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with lock nut |
Additional Information 2 | with bearing, with ball joint |
Placement on Vehicle | Rear, Lower, Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 179414 |
External Thread Size | M14 x 1,5 |
Function | Control/Trailing Arm, wheel suspension |
Weight | 1.950 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Paired article numbers | 185204 |
Weight | 1.586 kg |
Cone Size | 21 mm |
Additional Information 2 | with ball joint |
Function | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Left, Upper |
Material | Aluminium |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Release Fork, clutch |
Type | Release Fork, clutch |
Additional Information | with bush, with fastening/mounting material |
Weight | 2.582 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Eject Force | 380 N |
Function | Gas Spring, boot/cargo area |
Mounting points diameter | 17.8 mm |
Stroke | 172 mm |
Weight | 0.3 kg |
Housing Diameter | 18 mm |
Piston conrod diameter | 8 mm |
Type | Gas Spring, boot/cargo area |
Housing length | 254.5 mm |
Placement on Vehicle | both sides |
Length | 454 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M14 x 1,5 |
Material | Aluminium |
Placement on Vehicle | Front Axle Left, Front Axle Right, Lower, Front |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Weight | 2.34 kg |
Cone Size | 25 mm |
Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Window Regulator |
Weight | 3.0 kg |
Function | Window Regulator |
Operating Mode | Manual |
Paired article numbers | 183285 |
Placement on Vehicle | Left Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Tie Rod |
Placement on Vehicle | Front Axle |
Length | 1446 mm |
Cone Size | 20 mm |
Weight | 4.9 kg |
Pipe Diameter | 30 mm |
External Thread Size | M16 x 1,5 |
Extra Description | ProKit |
Type | Tie Rod |
Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 86 mm |
Width | 62 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Inner diameter | 30 mm |
Bearing Type | Angular Ball Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Weight | 3.740 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right |
Additional Information 2 | with screw |
Thread Size | M16x1,5 |
Bolt Hole Circle Diameter | 78 mm |
Bore Diameter | 8.5 mm |
External Teeth, Wheel Side | 36 |
Weight | 6.530 kg |
Number of mounting bores | 6 |
Min. Length | 764 mm |
Wheel Sided Joint Diameter | 81.4 mm |
Transmission-side joint diameter | 94 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,25 |
Placement on Vehicle | Front Axle Right |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 173586 |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Weight | 2.996 kg |
Additional Information 2 | with ball joint |
Cone Size | 17.4 mm |
Additional Information | with crown nut and split pin, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Steering arm type | Control Arm |
Additional Information 2 | with bearing |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 43138 |
Weight | 2.1 kg |
Material | Cast Steel |
Placement on Vehicle | Front Axle Right, Lower, Front |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 13.53 kg |
Rim Hole Number | 6 -Hole |
Placement on Vehicle | Rear Axle |
Outer diameter | 304 mm |
Thickness | 128.5 mm |
Brake Disc Thickness | 30 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 27.75 mm |
Bolt Hole Circle Diameter | 205 mm |
Centering Diameter | 124 mm |
Surface | Coated |
Function | Brake Disc |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M27 x 1,5 |
Weight | 7.54 kg |
Cone Size | 30 mm. 32 mm |
Function | Centre Rod Assembly |
Length | 840 mm |
Outer diameter | 48 mm |
Rod/Strut | Push Rod |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
Type | Centre Rod Assembly |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with nuts |
Rod/Strut | Coupling Rod |
Material | Steel |
Diameter | 230 mm |
Length | 283 mm |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
External Thread Size | M24 x 1,5 |
Weight | 4.200 kg |
Cone Size | 32 mm |
Pipe Diameter | 38 mm |
Type | Link/Coupling Rod, stabiliser bar |
Function | Link/Coupling Rod, stabiliser bar |
Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Heat Exchanger, interior heating |
Type | Heat Exchanger, interior heating |
Weight | 0.83 kg |
Core Length | 261 mm |
Core Width | 162 mm |
Core Depth | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Right Front |
Operating Mode | Manual |
Paired article numbers | 183287 |
Weight | 3.0 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.007 kg |
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Length | 520 mm |
Core Width | 401 mm |
Core Depth | 16 mm |
Additional Information 2 | with dryer |
Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter 1 | 68 mm |
Weight | 4.280 kg |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Width | 46 mm |
Outer diameter | 93 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Inner diameter | 30 mm |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 2 | 140 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing Kit (172781)
- 1x Febi Nut, kingpin (173786)
Important compatibility info
Weight | 2.72 kg |
Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
Material | Sheet Steel |
Steering arm type | Control Arm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.9 kg |
Placement on Vehicle | Rear Axle |
Width | 32 mm |
Outer diameter | 180 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.567 kg |
Function | Timing Belt Kit |
Type | Timing Belt Kit |
Number of Teeth | 122. 77 |
Units / Pulleys | incl. tensioner pulley |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
- 1x Febi Timing Belt (12667)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178794)
Important compatibility info
Voltage | 12 V |
Number of Connectors / Ports | 2 |
Rated Power | 366 W |
Weight | 1.6 kg |
Type | Interior Blower |
Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.39 kg |
Placement on Vehicle | Upper, Front Axle Left |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 107851 |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (107850)
- 1x Febi Nut (47776)
Important compatibility info
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Weight | 0.756 kg |
Width of castor bearing surface | 32 mm |
Type | Belt Tensioner, v-ribbed belt |
for OE number | 11 28 8 620 022 |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Rubber/Metal |
Thickness | 95 mm |
Weight | 0.803 kg |
Type | Bushing, axle beam |
Function | Bushing, axle beam |
Placement on Vehicle | Rear Axle Left, Front, Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 42 mm |
Outer diameter | 180 mm |
Weight | 2.410 kg |
Function | Brake Shoe Set |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023