Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.51 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Right |
| for OE number | 52128083 |
| Type | Mounting, engine |
| Paired article numbers | 183683 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.04
Important compatibility info
| Function | Cylinder Head, air compressor |
| Type | Cylinder Head, air compressor |
| Weight | 1.3 kg |
| Additional Information 2 | without spacer plate |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 8.570 kg |
| Placement on Vehicle | Front Axle |
| Length | 1005 mm |
| Outer diameter | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm. 30 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5, M24 x 1,5 |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Drive Shaft |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| Additional Information | with grease |
| Type | Drive Shaft |
| Min. Length | 526 mm |
| Bore Diameter | 10.6 mm |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 94 mm |
| External Teeth, Wheel Side | 38 |
| Weight | 7.098 kg |
| ABS Ring Diameter | 104 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 108 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Weight | 2.4 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 418 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M12 x 1,75 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Rear Axle Left, Rear Axle Right |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Length | 509 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 41 mm |
| Weight | 10.35 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Outer diameter | 74 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 1.500 kg |
| Width of castor bearing surface | 46 mm |
| for OE number | 5 0404 6191 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Steering arm type | Control Arm |
| Material | Aluminium |
| Placement on Vehicle | Front Axle Left, Lower, Front, Front Axle Right |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.5 kg |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (36954)
- 1x Febi Nut (15902)
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Paired article numbers | 107684 |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 259 mm |
| Min. Length | 226 mm |
| Pipe Diameter | 40 mm. 46 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.836 kg |
| for OE number | 81.30550.0116 |
| Type | Clutch Release Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 1.2 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 225 mm |
| Min. Length | 199 mm |
| Pipe Diameter | 54 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Length | 1420 mm |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Weight | 1.595 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29124)
- 1x Febi Belt Tensioner, v-ribbed belt (21027)
£73.05
Important compatibility info
| Paired article numbers | 22773 |
| Combi Switch Function | with klaxon, with indicator function, with light dimmer function, with rear fog light function, with high beam function |
| Function | Steering Column Switch |
| Weight | 0.100 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Top fork |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 14 mm |
| Piston conrod diameter | 12.5 mm |
| Max. Length | 380 mm |
| Weight | 1.6 kg |
| Type | Shock Absorber, driver cab suspension |
| Pipe Diameter | 43 mm |
| External Thread Size | M14 x 2 |
| Min. Length | 278 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 188 |
| Timing Chain Size | G68VCO, G68V-1 |
| Function | Timing Chain |
| Weight | 0.808 kg |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information 2 | with lid |
| Weight | 2.180 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175623 |
| Weight | 2.569 kg |
| Cone Size | 18 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 4.635 kg |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174785 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with bearing |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right, Front |
| Material | Steel |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information | with fastening/mounting material |
| Width | 50 mm |
| Inner diameter | 49 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Additional Information 2 | with ABS sensor ring |
| Weight | 1.824 kg |
| Outer diameter | 92 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Type | Oil Pump |
| Function | Oil Pump |
| Weight | 0.830 kg |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 2.8 kg |
| Rated Power | 1.1 kW |
| Function | Starter |
| Type | Starter |
| Voltage | 12 V |
| Number of Teeth | 10 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.37 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 63 mm |
| Outer diameter | 74 mm |
| Number of Connectors / Ports | 2 |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Additional Information | with fastening/mounting material |
| Outer diameter 1 | 63 mm |
| Outer diameter 2 | 136 mm |
| Sealing lip material | NBR (nitrile butadiene rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Cone Size | 17.5 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M14 x 2 |
| Weight | 5.755 kg |
| Steering arm type | Semi-Trailing Arm |
| Paired article numbers | 186639 |
| Additional Information | with crown nut and split pin, with rubber mounts |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Paired article numbers | 07965 |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.700 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£73.05
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Weight | 8.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 692 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Paired article numbers | 182937 |
| External Teeth, Wheel Side | 28 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 48 mm |
| Placement on Vehicle | Rear Axle Right |
| Weight | 4.1 kg |
| Inner diameter | 120 mm |
| Outer diameter | 180 mm |
| Function | Bearing / Wheel Bearing |
| Type | Bearing / Wheel Bearing |
| Bearing Type | Tapered Roller Bearing |
| Bearing Code | 33024 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Weight | 0.918 kg |
| Inner length 1 | 890 mm |
| Inner length 2 | 903 mm |
| Outer length 1 | 1154 mm |
| Outer length 2 | 1251 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Number of Connectors / Ports | 3 |
| Combi Switch Function | with indicator function, with high beam function, with park light function |
| Colour | Black |
| Function | Steering Column Switch |
| Weight | 0.182 kg |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.442 kg |
| Material | Plastic |
| Opening Temperature | 97 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | without gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Width | 139 mm |
| Function | Oil Cooler, engine oil |
| Height | 134 mm |
| Length | 160 mm |
| Weight | 1.175 kg |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Placement on Vehicle | Front Axle Left, Lower Front Axle |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Weight | 4.514 kg |
| Paired article numbers | 182076 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 6.7 kg |
| Placement on Vehicle | Front Axle |
| Length | 728 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.325 kg |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.700 kg |
| Placement on Vehicle | Lower Front Axle, Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 07966 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Ball Joint (03822)
- 1x Febi Ball Joint (03825)
£73.05
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT, M24 x 1,5 RHT |
| Weight | 5.5 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Placement on Vehicle | Front Axle |
| Type | Tie Rod |
| Pipe Diameter | 30 mm |
| Additional Information 2 | with crown nut |
| Length | 1645 mm |
| External Thread Size | M16 x 1,5 |
| Cone Size | 20 mm |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 3.88 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30430 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 0.8 kg |
| Outer diameter | 124 mm |
| Inner diameter | 33 mm |
| Bolt Hole Circle Diameter | 80 mm |
| Thickness | 24 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Additional Information 2 | with bearing, with ball joint |
| Placement on Vehicle | Front Axle Left, Front |
| Material | Steel |
| External Thread Size | M14 x 1,5 |
| Weight | 4.635 kg |
| Steering arm type | Control Arm |
| Paired article numbers | 174786 |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 19993 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Weight | 3.150 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | without holder |
| Additional Information 2 | without ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Weight | 1.44 kg |
| Outer diameter | 78 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 42 mm |
| Type | Belt Tensioner, v-ribbed belt |
| for OE number | 457 200 31 70 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.05
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Type | Brake Caliper |
| Weight | 2.9 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Additional Information | with electric motor |
| Paired article numbers | 184698 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.06
Important compatibility info
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Weight | 0.762 kg |
| Type | Belt Tensioner, v-ribbed belt |
| Material | Plastic |
| Width of castor bearing surface | 28 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 317 mm |
| Thickness | 62 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.0 kg |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.07
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
| Weight | 1.200 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.09
Important compatibility info
| Weight | 9.72 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 304 mm |
| Thickness | 48 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Placement on Vehicle | Left |
| Length | 114 mm |
| Width | 68 mm |
| Material | Rubber/Metal |
| Thickness | 126 mm |
| Paired article numbers | 107737 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Weight | 2.212 kg |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Weight | 2.212 kg |
| Thickness | 126 mm |
| Paired article numbers | 107736 |
| Function | Mounting Bracket, shock absorber mounting (driver cab) |
| Material | Rubber/Metal |
| Width | 68 mm |
| Length | 114 mm |
| Placement on Vehicle | Right |
| Type | Mounting Bracket, shock absorber mounting (driver cab) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.11
Important compatibility info
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 182953 |
| Weight | 1.57 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.13
Important compatibility info
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
| Weight | 0.04 kg |
| Number of Connectors / Ports | 4 |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£73.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023