Proud to be a UK-based company
Contact us
Important compatibility info
| Material | Sheet Steel |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 37612 |
| Placement on Vehicle | Front Axle Right, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 0.4 kg |
| Function | Suspension, propshaft |
| Inner diameter | 35 mm |
| Thickness | 180 mm |
| Outer diameter | 55 mm |
| Width | 37 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Bearing Type | Rolling Bearing |
| Hole Spacing | 160 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Length | 103.45 mm |
| Operating pressure to | 10 bar |
| Number of Connectors / Ports | 2 |
| Width | 42.45 mm |
| Voltage | 24 V |
| Weight | 0.429 kg |
| Function | Solenoid Valve |
| Valve type | Solenoid Valve |
| Internal Thread Size | M12 x 1,5 |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 53 mm |
| Outer diameter | 74 mm |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Weight | 3.16 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Number of Connectors / Ports | 15 |
| Working length | 3 m |
| Function | Coiled Cable |
| Additional Information 2 | with plug |
| Weight | 2.47 kg |
| Connecting plug material | Plastic |
| Material | PU (Polyurethane) |
| Version | OE Standard |
| Inspection Tag | ADR |
| DIN / ISO | 12098 |
| Type | Coiled Cable |
| Temperature range from | -40 °C |
| Temperature range to | 125 °C |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 6.46 kg |
| Pipe Diameter | 38 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Internal Thread Size | M30 x 1,5 LHT |
| External Thread Size | M18 x 1,5 |
| Length | 900 mm |
| Cone Size | 22 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Weight | 9.66 kg |
| Length | 915 mm |
| Material | Steel |
| Function | Centre Rod Assembly |
| Pipe Diameter | 40 mm. 50 mm |
| Cone Size | 30 mm |
| Thickness | 118 mm |
| Spanner Size | 36 |
| Rod/Strut | Push Rod |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Thread Length | 27.2 mm. 80 mm |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.02
Important compatibility info
| Chain Type | Duplex, Closed chain |
| Number of Chain Links | 110 |
| Weight | 1.444 kg |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | D67HR |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Guide, timing chain (19079)
- 1x Febi Guide, timing chain (19078)
- 1x Febi Guide, timing chain (19077)
- 1x Febi Timing Chain (25354)
- 1x Febi Tensioner, timing chain (17773)
£76.02
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.410 kg |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Paired article numbers | 36334 |
| Placement on Vehicle | Upper Front Axle, Right |
| Material | Aluminium |
| Outer diameter | 20 mm |
| Inner diameter | 11 mm |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.05 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Core Depth | 16 mm |
| Function | Condenser, air conditioning |
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Additional Information 2 | with dryer |
| Core Length | 700 mm |
| Weight | 2.603 kg |
| Core Width | 381 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.204 kg |
| Paired article numbers | 182030 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Material | Aluminium |
| Placement on Vehicle | Upper, Rear Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.03
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.068 kg |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 330 mm |
| Type | Sensor, exhaust gas temperature |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.04
Important compatibility info
| Operating Mode | Hydraulic |
| Spanner Size | 19 |
| Function | Tensioner, timing chain |
| Weight | 0.160 kg |
| for OE number | 271 050 09 11 |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Type | Shock Absorber |
| Bore Diameter | 14 mm |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M12 x 1,25 |
| Pipe Diameter | 45 mm |
| Max. Length | 535 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Function | Shock Absorber |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Min. Length | 350 mm |
| Shock Absorber Type | Gas Pressure |
| Piston conrod diameter | 20 mm |
| Mounting bores distance | 60 mm |
| Weight | 3.900 kg |
| Shock Absorber System | Twin-Tube |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Length | 497 mm |
| Height | 107 mm |
| Width | 302 mm |
| Additional Information | with gasket/seal, with oil drain plug, Oil sump with permanently integrated filter element |
| Additional Information 2 | with bolts/screws |
| Filter type | Screen Filter |
| Transmission Type | Automatic Transmission |
| Weight | 1.890 kg |
| Type | Hydraulic Filter, automatic transmission |
| Function | Hydraulic Filter, automatic transmission |
| Extra Description | febi Plus |
| Replaces | 172288 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| External Teeth, Wheel Side | 28 |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Paired article numbers | 182962 |
| External Teeth, Diff.Side | 39 |
| Weight | 11.004 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 1117 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.08
Important compatibility info
| Weight | 0.629 kg |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Inner diameter | 85 mm |
| Weight | 3.58 kg |
| Function | Suspension, propshaft |
| Hole Spacing | 220 mm |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Bearing Type | Rolling Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Min. Length | 930 mm |
| Wheel Sided Joint Diameter | 91.6 mm |
| External Teeth, Diff.Side | 26 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Weight | 7.986 kg |
| Transmission-side joint diameter | 87.1 mm |
| External Teeth, Wheel Side | 25 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Material | Plastic |
| Colour | Black |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
| Type | Oil Separator, crankcase ventilation |
| Weight | 0.53 kg |
| Additional Information | with gasket/seal, with venting hoses |
| Number of hoses | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (170406)
- 1x Febi Hose, crankcase ventilation (170674)
- 1x Febi Hose, crankcase ventilation (170861)
£76.10
Important compatibility info
| Min. Length | 927 mm |
| Transmission-side joint diameter | 75.2 mm |
| Wheel Sided Joint Diameter | 83 mm |
| External Teeth, Diff.Side | 26 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 7.282 kg |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.10
Important compatibility info
| Weight | 0.35 kg |
| Voltage | 24 V |
| Operating Mode | Electric-pneumatic |
| Number of Connectors / Ports | 2 |
| Rated Power | 9 W |
| Valve type | Solenoid Valve |
| Pressure | 10 bar |
| Function | Solenoid Valve |
| Type | Solenoid Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.12
Important compatibility info
| Weight | 0.625 kg |
| Type | Timing Chain |
| Chain Type | Simplex, Closed chain |
| Timing Chain Size | G68HR-8 |
| Number of Chain Links | 112 |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.13
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Weight | 8.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 692 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Paired article numbers | 182937 |
| External Teeth, Wheel Side | 28 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.15
Important compatibility info
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.189 kg |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.17
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 887 mm |
| Additional Information | with nuts |
| Rod/Strut | Guide Rod |
| Weight | 8.200 kg |
| Cone Size | 32 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 42 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.17
Important compatibility info
| Weight | 0.19 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | Pressure Converter |
| Extra Description | febi Plus |
| Type | Pressure Converter |
| for OE number | 55203202 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.18
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 249 mm |
| Width | 114.5 mm |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | ECE R90 Approved |
| Function | Brake Pad Set, disc brake |
| Thickness/Strength 1 | 28 mm |
| Type | Brake Pad Set, disc brake |
| Weight | 11.382 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.22
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 46 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 25 mm |
| Bolt Hole Circle Diameter | 95 mm |
| Centering Diameter | 64 mm |
| Surface | Coated |
| Mounting points diameter | 12.47 mm |
| Function | Brake Disc |
| Weight | 8.60 kg |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.22
Important compatibility info
| Weight | 1.162 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 22 11 3 421 299 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.23
Important compatibility info
| Extra Description | febi Plus |
| Height | 441 mm |
| Outer diameter | 169 mm |
| Inner diameter | 160 mm |
| Filter type | Filter Insert |
| Type | Air filter kit |
| Function | Air filter kit |
| Weight | 4.99 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Air Filter (38615)
- 1x Febi Air Filter (38614)
£76.23
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 310 mm |
| Thickness | 82 mm |
| Brake Disc Thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Surface | Coated |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Weight | 8.6 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.25
Important compatibility info
| Length | 276 mm |
| Capacity | 25 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Material | Steel |
| Weight | 8.2 kg |
| Outer diameter | 495 mm |
| Internal Thread Size | M22 x 1,5 |
| Type | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.26
Important compatibility info
| Type | Expansion Tank, coolant |
| Weight | 1.975 kg |
| Function | Expansion Tank, coolant |
| Material | PA (polyamide) |
| Length | 619 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Paired article numbers | 177052 |
| Weight | 1.580 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Function | Starter |
| Type | Starter |
| Weight | 4.4 kg |
| Rated Power | 2 kW |
| Voltage | 12 V |
| Number of Teeth | 12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.28
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Weight | 2.8 kg |
| Material | Cast Iron |
| Paired article numbers | 182706 |
| Vehicle Equipment | for vehicles with electric parking brake |
| Function | Brake Caliper |
| Brake caliper piston diameter | 36 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Function | Brake Caliper |
| Paired article numbers | 182707 |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Type | Brake Caliper |
| Weight | 2.8 kg |
| Brake caliper piston diameter | 36 mm |
| Vehicle Equipment | for vehicles with electric parking brake |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.31
Important compatibility info
| Weight | 0.968 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Rear, Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.32
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Length | 102 mm |
| Width | 105 mm |
| Thickness | 59 mm |
| Valve type | Solenoid Valve |
| Function | Valve, ABS regulation |
| Weight | 0.712 kg |
| Type | Valve, ABS regulation |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.36
Important compatibility info
| Thickness | 295 mm. 143 mm |
| Outer diameter | 205 mm. 259 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Weight | 9.200 kg |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.38
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.141 kg |
| Type | Switch, splitter gearbox |
| Function | Switch, splitter gearbox |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.41
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Number of mounting bores | 1 |
| Surface | Coated |
| Centering Diameter | 76 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Weight | 9.46 kg |
| Outer diameter | 303 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 25 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 70.4 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.43
Important compatibility info
| Weight | 2.300 kg |
| Placement on Vehicle | Right |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 11210-4EA0B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.43
Important compatibility info
| Weight | 0.046 kg |
| Function | Sensor, exhaust gas temperature |
| Spanner Size | 17 |
| Number of Connectors / Ports | 2 |
| Cable Length | 400 mm |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Placement on Vehicle | after catalytic converter |
| Cable Length | 800 mm |
| Function | Oxygen Sensor |
| Weight | 0.102 kg |
| Number of circuits | 4 |
| Lambda Sensor | Diagnostic Probe |
| Type | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Function | Sensor, exhaust pressure |
| Type | Sensor, exhaust pressure |
| Weight | 0.035 kg |
| Number of Connectors / Ports | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| for OE number | 5WA 199 262 Q |
| Weight | 1.570 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.45
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with crown nut and split pin, with rubber mounts |
| Placement on Vehicle | Front Axle Right, Upper |
| External Thread Size | M14 x 1,5 |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Cone Size | 18 mm |
| Paired article numbers | 43022 |
| Weight | 2.52 kg |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£76.47
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023