Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Weight | 1.050 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.00
Important compatibility info
| Filter type | High efficiency air filter (HEPA) |
| Function | Filter Set, cabin air |
| Type | Filter Set, cabin air |
| Weight | 0.720 kg |
| Length | 465 mm |
| Width | 180 mm |
| Height | 30.5 mm |
| Placement on Vehicle | Engine Compartment, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Weight | 2.510 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 22.2 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.02
Important compatibility info
| Additional Information 2 | with seal ring |
| Number of Connectors / Ports | 2 |
| Weight | 0.750 kg |
| for OE number | 009 542 17 18 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 672 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 2.033 kg |
| Outer diameter | 139 mm. 143 mm |
| Thickness | 44.5 mm |
| Inner diameter | 30 mm |
| Number of Ribs | 8 |
| Parameter | 4PK + 5PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Width of castor bearing surface | 47 mm |
| Mounting points diameter | 10 mm |
| Weight | 1.328 kg |
| Inner diameter | 12 mm |
| Material | Metal |
| Outer diameter | 74 mm |
| Function | Deflection/Guide Pulley, V-ribbed belt |
| Type | Deflection/Guide Pulley, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 92 mm |
| Outer diameter | 135 mm |
| Thickness | 76 mm |
| Inner diameter | 35 mm |
| Number of Holes | 5 |
| Bearing Type | Angular Ball Bearing |
| Function | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Weight | 3.3 kg |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Weight | 3.047 kg |
| Paired article numbers | 187796 |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 15.7 mm |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Tensioner, timing chain |
| Length | 91 mm |
| Function | Tensioner, timing chain |
| Outer diameter | 27 mm |
| Operating Mode | Hydraulic |
| Spanner Size | 17 |
| Weight | 0.081 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.210 kg |
| Placement on Vehicle | Front Axle Left, Rear, Lower |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 38058 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Additional Information | with rubber mounts |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 187797 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Material | Sheet Steel |
| Weight | 3.047 kg |
| Cone Size | 20 mm |
| Cone Size 1 | 15.7 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Metal |
| Belts | with rounded tooth profile |
| Weight | 1.248 kg |
| Number of Teeth | 104 |
| Surface | Coated |
| Function | Water Pump & Timing Belt Kit |
| Width | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (173763)
- 1x Febi Water Pump, engine cooling (17340)
£75.03
Important compatibility info
| Type | Drive Shaft |
| Function | Drive Shaft |
| Weight | 10.596 kg |
| External Teeth, Wheel Side | 31 |
| Paired article numbers | 182815 |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
| Transmission-side joint diameter | 88.9 mm |
| Wheel Sided Joint Diameter | 98 mm |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1072 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 0.427 kg |
| Function | Timing Chain |
| Timing Chain Size | Z67 |
| Number of Chain Links | 180 |
| Chain Type | Silent Chain, Closed chain |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 7.842 kg |
| Width | 200 mm |
| Material | Steel |
| Colour | Black |
| Surface | Zinc-coated |
| Brake Pad | without lining |
| Inner Bow Length | 440 mm |
| Function | Brake Shoe |
| Additional Information | with fastening/mounting material |
| Type | Brake Shoe |
| for OE number | 05.091.27.54.2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Brake Shoe (07247)
- 1x Febi Brake Shoe Sleeve (07266)
- 1x Febi Split Pin (07243)
- 2x Febi Circlip, brake anchor pin (07275)
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Right, Lower, Rear |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 40853 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 3.122 kg |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | with bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (40822)
- 1x Febi Ball Joint (40845)
- 1x Febi Nut (34653)
- 1x Febi Bolt, control arm (40852)
£75.03
Important compatibility info
| Weight | 0.94 kg |
| Number of Connectors / Ports | 2 |
| Colour Coding | Green |
| Type | EGR Valve |
| Function | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
| Weight | 8.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 692 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 89 mm |
| Paired article numbers | 182937 |
| External Teeth, Wheel Side | 28 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Tilt Pump, driver cab |
| Weight | 2.367 kg |
| Suction side external thread size | M12 x 1,5 |
| Pressure side external thread size | M12 x 1,5 |
| Number of Connectors / Ports | 2 |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Function | Fan, engine cooling |
| Number of Wings | 11 |
| Rated Power | 200 W |
| Operating Mode | Electric |
| Outer diameter | 280 mm |
| Width | 70 mm |
| Placement on Vehicle | Right |
| Weight | 1.65 kg |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Rod/Strut | Coupling Rod |
| Internal Thread Size | M30 x 1,5 |
| Function | Centre Rod Assembly |
| Additional Information | with lock nut |
| External Thread Size | M24 x 1,5 |
| Length | 935 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Weight | 7.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Additional Information 2 | with seal ring, with screw |
| Inner diameter | 30 mm |
| Number of Ribs | 6 |
| Weight | 2.372 kg |
| Parameter | 7PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
| Outer diameter | 157 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (107196)
- 1x Febi Pulley Bolt (177692)
£75.03
Important compatibility info
| Function | Brake Disc |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 154 mm |
| Surface | Coated |
| Inner diameter | 132 mm |
| Brake Disc Thickness | 30.2 mm |
| Brake Disc Type | Internally Vented |
| Thickness | 90 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Weight | 14.0 kg |
| Rim Hole Number | 8 -Hole |
| Internal Thread Size | M14 x 2 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Extra Description | febi Plus |
| Weight | 0.317 kg |
| Type | Pipe, EGR valve |
| Function | Pipe, EGR valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 3.4 kg |
| Placement on Vehicle | Rear, both sides |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom Yoke |
| Max. Length | 297 mm |
| Min. Length | 212 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle, Right |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 2.123 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 194329 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 1.7 kg |
| Function | Brake Valve, service brake |
| Type | Brake Valve, service brake |
| Internal Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Surface | Coated |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
| Number of Teeth | 122 |
| Width | 26.5 mm |
| Weight | 0.517 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (14370)
- 1x Febi Tensioner Pulley, timing belt (11559)
£75.03
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Paired article numbers | 182023 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.568 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 589 mm |
| Wheel Sided Joint Diameter | 98.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
Important compatibility info
| Weight | 3.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 60 mm |
| Outer diameter | 74 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with integrated ABS sensor |
| Outer diameter 2 | 152 mm |
| Outer diameter 1 | 62 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£75.03
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023