Important compatibility info
Resistor Type | Hot-film Sensor |
Function | Mass Air Flow Sensor |
Number of Connectors / Ports | 4 |
Type | Mass Air Flow Sensor |
Weight | 0.03 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Refrigerant | R 134a |
Type | Condenser, air conditioning |
Core Length | 391 mm |
Core Width | 694 mm |
Weight | 2.603 kg |
Additional Information 2 | with dryer |
Core Depth | 16 mm |
Function | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | EGR Valve |
Weight | 0.68 kg |
Type | EGR Valve |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Length | 1050 mm |
Material | Rubber |
Thickness | 18 mm |
Function | Gasket, oil sump |
Type | Gasket, oil sump |
Seal Material | Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Hydraulic Hose, steering |
Weight | 0.789 kg |
Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 37611 |
Placement on Vehicle | Front Axle Left, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.236 kg |
Number of Connectors / Ports | 5 |
Combi Switch Function | with wash function, with indicator function, with high beam function, with wipe interval function |
Type | Steering Column Switch |
Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Rolling piston material | Plastic |
Function | Bellow, air suspension |
Type | Bellow, air suspension |
Weight | 6.2 kg |
Additional Information | with piston |
Outer diameter | 227 mm. 300 mm |
Thickness | 400 mm. 200 mm |
External Thread Size | M12 x 1,75, M22 x 1,5, M12 x 1,5, M8 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Centre Rod Assembly |
Pipe Diameter | 40 mm |
Rod/Strut | Coupling Rod |
Internal Thread Size | M30 x 1,5 |
Function | Centre Rod Assembly |
Additional Information | with lock nut |
External Thread Size | M24 x 1,5 |
Length | 935 mm |
Extra Description | ProKit |
Cone Size | 30 mm |
Weight | 7.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Hole Spacing | 90 mm |
Function | Brake Master Cylinder |
Weight | 0.53 kg |
for OE number | 004 430 75 01 |
Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle |
Width | 62 mm |
Outer diameter | 91 mm |
Additional Information 2 | Wheel Bearing integrated into wheel hub |
Inner diameter | 33 mm |
Weight | 5.130 kg |
Bearing Type | Tapered Roller Bearing |
Type | Wheel Bearing Kit |
Function | Wheel Bearing Kit |
Outer diameter 1 | 67 mm |
Outer diameter 2 | 169 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bolts/screws |
Weight | 2.780 kg |
Parameter | 7PK |
Width | 26 mm |
Outer diameter | 168 mm |
Inner diameter | 59 mm |
Number of Ribs | 6 |
Function | Belt Pulley, crankshaft |
Extra Description | ProKit |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31212)
Important compatibility info
Additional Information 2 | with rolling bearing |
Inner diameter | 30 mm |
Weight | 0.479 kg |
Bearing Type | Rolling Bearing |
Hole Spacing | 138 mm |
Type | Suspension, propshaft |
Length | 178 mm |
Function | Suspension, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 03G 115 105 |
Additional Information 2 | with gear |
Weight | 0.610 kg |
Type | Oil Pump |
Function | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wiper Motor |
Number of Connectors / Ports | 4 |
Placement on Vehicle | Rear |
Voltage | 12 V |
Weight | 0.9 kg |
Type | Wiper Motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with screw |
Thread Size | M10x1,5 |
External Teeth, Wheel Side | 36 |
Weight | 5.489 kg |
External Teeth, Diff.Side | 26 |
Min. Length | 581 mm |
Wheel Sided Joint Diameter | 82.4 mm |
Transmission-side joint diameter | 82 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Wheel Bearing Kit |
Additional Information | with fastening/mounting material |
Weight | 4.27 kg |
Bearing Type | Angular Ball Bearing |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 136 mm |
Outer diameter | 81 mm |
Sealing lip material | NBR (nitrile butadiene rubber) |
Inner diameter | 27 mm |
Type | Wheel Bearing Kit |
Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Drive Shaft |
Function | Drive Shaft |
Wheel Sided Joint Diameter | 105.1 mm |
Transmission-side joint diameter | 107.5 mm |
Min. Length | 618 mm |
External Teeth, Diff.Side | 26 |
Weight | 9.014 kg |
External Teeth, Wheel Side | 38 |
Thread Size | M20x1,5 |
Additional Information 2 | with screw |
Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | ProKit |
for OE number | 970 330 00 03 |
Cone Size | 26 mm |
Function | Tie Rod |
Type | Tie Rod |
Pipe Diameter | 40 mm |
Outer diameter | 40 mm |
Length | 1640 mm |
Placement on Vehicle | Front Axle |
Weight | 8.057 kg |
Internal Thread Size | M30 x 1,5 |
External Thread Size | M20 x 1,5 |
Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Sheet Steel |
Steering arm type | Triangular Control Arm (CV) |
Paired article numbers | 37612 |
Placement on Vehicle | Front Axle Right, Lower |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023