Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.12 kg |
| Length | 178 mm |
| Material | Plastic |
| Number of Connectors / Ports | 2 |
| Function | Slave Cylinder, seat adjustment |
| Type | Slave Cylinder, seat adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 1.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 310 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 38 mm. 52 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 45924 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Material | Steel |
| Number of Ribs | 7 |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Weight | 1.475 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.500 kg |
| Type | Clutch Release Bearing |
| Replaces | 105257 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Paired article numbers | 183086 |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information | with Split Pin |
| Min. Length | 613 mm |
| Function | Drive Shaft |
| External Teeth, Diff.Side | 29 |
| Weight | 7.860 kg |
| External Teeth, Wheel Side | 29 |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter | 65 mm |
| Inner diameter | 35 mm |
| Weight | 0.560 kg |
| Placement on Vehicle | Rear Axle |
| Width | 21 mm |
| Type | Wheel Bearing Kit |
| Bearing Type | Tapered Roller Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (175597)
£80.97
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 360 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 45 mm. 62 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Piston conrod diameter | 18 mm |
| Weight | 3.75 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 7.7 kg |
| Length | 840 mm |
| Outer diameter | 10 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M28 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 1.1 kg |
| Placement on Vehicle | Rear |
| Length | 1915 mm. 745 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Number of Connectors / Ports | 4. 5 |
| Weight | 0.122 kg |
| Type | Control Unit, glow time |
| Extra Description | febi Plus |
| Function | Control Unit, glow time |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 0.590 kg |
| Placement on Vehicle | Left Rear |
| Operating Mode | Electric |
| Paired article numbers | 27348 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.97
Important compatibility info
| Weight | 0.408 kg |
| Function | Chain Kit, oil pump drive |
| Extra Description | Standard Medium Kit |
| Number of Chain Links | 44 |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain Kit, oil pump drive (109479)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
- 1x Febi Screw (48337)
£80.97
Important compatibility info
| Cone Size 2 | 23 mm |
| Cone Size 1 | 18 mm |
| Weight | 3.067 kg |
| Paired article numbers | 182079 |
| Additional Information | with supporting/ball joint |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.99
Important compatibility info
| Weight | 3.067 kg |
| Steering arm type | Control Arm |
| Cone Size 2 | 23 mm |
| Paired article numbers | 182070 |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information | with supporting/ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 1 | 18 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£80.99
Important compatibility info
| Weight | 1.44 kg |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| for OE number | 1 682 477 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.01
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 9.9 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Thickness | 49.3 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 62 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.05
Important compatibility info
| Weight | 11.0 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 308 mm |
| Thickness | 61 mm |
| Brake Disc Thickness | 31 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 113.5 mm |
| Centering Diameter | 93 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.06
Important compatibility info
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Minimum thickness | 28.4 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 73.2 mm |
| Outer diameter | 370 mm |
| Rotor Style | perforated/vented |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Front Axle |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Weight | 13.2 kg |
| Type | Brake Disc Rotor |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.08
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Housing material | Aluminium |
| Additional Information | with fastening/mounting material |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Weight | 0.800 kg |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.08
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.4 kg |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 240 mm |
| Thickness | 80.6 mm |
| Brake Disc Thickness | 8 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 52.3 mm |
| Surface | Oiled |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Additional Information 2 | with grease cap, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.08
Important compatibility info
| Weight | 13.4 kg |
| Replaces | 15043 |
| Outer diameter | 200 mm. 260 mm |
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Thickness | 178 mm. 420 mm |
| Type | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.14
Important compatibility info
| Capacity | 15 l |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Internal Thread Size | M22 x 1,5 |
| Function | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Weight | 6.6 kg |
| Length | 513 mm |
| Material | Steel |
| Outer diameter | 206 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.17
Important compatibility info
| Length | 606.5 mm |
| Material | Steel |
| Outer diameter | 246 mm |
| Capacity | 25 l |
| Operating Pressure | 15.5 bar |
| Function | Air Tank, compressed-air system |
| Weight | 8.8 kg |
| Internal Thread Size | M22 x 1,5 |
| Number of Connectors / Ports | 4 |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.17
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 30 |
| Weight | 6.236 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 544 mm |
| Wheel Sided Joint Diameter | 93.1 mm |
| Transmission-side joint diameter | 82 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.19
Important compatibility info
| Paired article numbers | 184697 |
| Weight | 2.9 kg |
| Function | Brake Caliper |
| Type | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Iron |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Brake Caliper Type | Brake Caliper (1 piston) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.29
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Length | 462 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Capacity | 30 l |
| Operating Pressure | 12.5 bar |
| Function | Air Tank, compressed-air system |
| Number of Connectors / Ports | 4 |
| Weight | 9.2 kg |
| Type | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.32
Important compatibility info
| Function | Belt Tensioner, v-ribbed belt |
| Outer diameter | 76 mm |
| Housing material | Aluminium |
| Weight | 0.80 kg |
| Width of castor bearing surface | 24 mm |
| Track rollers material | Metal |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.33
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Rated Power | 204 W |
| Weight | 1.4 kg |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.33
Important compatibility info
| Placement on Vehicle | Right |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 2.29 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.39
Important compatibility info
| Centering Diameter | 67 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 46.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 9.92 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.39
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| Weight | 2.750 kg |
| Paired article numbers | 174055 |
| Placement on Vehicle | Left, Lower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.41
Important compatibility info
| Weight | 0.060 kg |
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.42
Important compatibility info
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26642 |
| Weight | 2.63 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.45
Important compatibility info
| for OE number | 93180992 |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Weight | 0.20 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.45
Important compatibility info
| Function | Mounting, engine |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | both sides, Front |
| Weight | 2.490 kg |
| Type | Mounting, engine |
| Internal Thread Size | M12 x 1,5, M12 x 1,75, M14 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.49
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Thickness | 51.1 mm |
| Brake Disc Thickness | 30 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Weight | 9.75 kg |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 27.4 mm |
| Outer diameter | 330 mm |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.49
Important compatibility info
| Function | Interior Blower |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.5 kg |
| Voltage | 12 V |
| Type | Interior Blower |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.49
Important compatibility info
| Paired article numbers | 177970 |
| Weight | 0.166 kg |
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Placement on Vehicle | Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.59
Important compatibility info
| Weight | 11.2 kg |
| Internal Thread Size | M22 x 1,5 |
| Length | 605 mm |
| Material | Steel |
| Outer diameter | 310 mm |
| Capacity | 40 l |
| Operating Pressure | 12.5 bar |
| Type | Air Tank, compressed-air system |
| Function | Air Tank, compressed-air system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.60
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, manual transmission |
| Weight | 3.64 kg |
| Type | Mounting, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.60
Important compatibility info
| Weight | 0.5 kg |
| Additional Information | with gasket/seal |
| Number of Connectors / Ports | 3 |
| Type | EGR Valve |
| Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.62
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.1 kW |
| Weight | 4.0 kg |
| for OE number | 02M 911 023 G |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.64
Important compatibility info
| Additional Information | with gasket/seal, with oil filter, with oil cooler |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
| Weight | 2.08 kg |
| Type | Housing, oil filter |
| Width | 188 mm |
| Height | 102 mm |
| Length | 342 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.64
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Weight | 0.43 kg |
| Function | Chain Kit, oil pump drive |
| Timing Chain Size | G53H, G53HRF |
| Number of Chain Links | 80 |
| Chain Type | Simplex, Closed chain |
| Type | Chain Kit, oil pump drive |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25388)
- 1x Febi Chain Tensioner, oil pump drive (32265)
£81.64
Important compatibility info
| Placement on Vehicle | Cylinder Head, Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 188252 |
| Colour | Grey |
| Weight | 0.796 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.65
Important compatibility info
| Weight | 1.9 kg |
| Number of Teeth | 132 |
| Belts | with rounded tooth profile |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Water pump impeller material | Plastic |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (22056)
- 1x Febi Water Pump, engine cooling (22144)
£81.66
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 11 23 257 42R |
| Placement on Vehicle | Right |
| Weight | 1.5 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.68
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Air Suspension Valve |
| Weight | 0.457 kg |
| Internal Thread Size | M12 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.68
Important compatibility info
| Additional Information 2 | with nut |
| Min. Length | 867 mm |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Weight | 7.934 kg |
| External Teeth, Diff.Side | 26 |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 80 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.69
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023