Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Function | Air Suspension Valve |
| Weight | 0.457 kg |
| Internal Thread Size | M12 x 1,5 |
| Type | Air Suspension Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.68
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| for OE number | 11 23 257 42R |
| Placement on Vehicle | Right |
| Weight | 1.5 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.68
Important compatibility info
| Additional Information 2 | with nut |
| Min. Length | 867 mm |
| Function | Drive Shaft |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 23 |
| Weight | 7.934 kg |
| External Teeth, Diff.Side | 26 |
| ABS Ring Diameter | 85 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Transmission-side joint diameter | 80 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.69
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Number of Connectors / Ports | 5 |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Weight | 0.263 kg |
| for OE number | 038 906 461 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.69
Important compatibility info
| Weight | 0.9 kg |
| Outer diameter | 160 mm |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Number of Holes | 8 |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (101771)
- 8x Febi Screw (21197)
- 8x Febi Nut (19104)
- 8x Febi Washer (19107)
£81.72
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| for OE number | 238 240 20 00 |
| Weight | 1.400 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.75
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Placement on Vehicle | Rear Axle Right, Lower |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 182082 |
| Weight | 4.68 kg |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.75
Important compatibility info
| Placement on Vehicle | both sides |
| for OE number | 1929 558 |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 2.687 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.78
Important compatibility info
| Weight | 1.503 kg |
| Core Depth | 12 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
| Core Width | 645 mm |
| Core Length | 336 mm |
| Function | Condenser, air conditioning |
| Type | Condenser, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.83
Important compatibility info
| Weight | 2.6 kg |
| Outer diameter | 166 mm |
| Thickness | 41 mm |
| Inner diameter | 58 mm |
| Number of Ribs | 7 |
| Parameter | 8PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.90
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 326 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Weight | 9.2 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rotor Style | internally vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.91
Important compatibility info
| Weight | 1.028 kg |
| Outer diameter | 76 mm |
| Operating Mode | Automatic |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Metal |
| Width of castor bearing surface | 24 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.92
Important compatibility info
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Additional Information 2 | with seal ring |
| Weight | 0.84 kg |
| Number of Wings | 6 |
| for OE number | 16100-09310 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.92
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.600 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 58 mm |
| Max. Length | 554 mm |
| Min. Length | 372 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M12 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.92
Important compatibility info
| Function | Sensor, crankshaft pulse |
| Number of Connectors / Ports | 3 |
| Weight | 0.070 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.92
Important compatibility info
| Additional Information | with fuel sender unit |
| Operating Mode | Electric |
| Number of Connectors / Ports | 4 |
| Weight | 0.82 kg |
| Type | Fuel Feed Unit |
| Function | Fuel Feed Unit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.93
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Weight | 1.657 kg |
| Width | 82 mm |
| Material | Metal |
| Outer diameter | 75 mm |
| Mounting points diameter | 10 mm |
| Type | Belt Tensioner, V-ribbed belt |
| Function | Belt Tensioner, V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.93
Important compatibility info
| Replaces | 43701 |
| Material | Rubber/Metal |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Placement on Vehicle | Left |
| Weight | 1.45 kg |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.95
Important compatibility info
| Number of Connectors / Ports | 9 |
| Weight | 0.164 kg |
| Type | Control Unit, glow time |
| Function | Control Unit, glow time |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 628 mm |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Push Rod |
| Weight | 5.65 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Additional Information | with gasket/seal, with fastening/mounting material |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 32 mm |
| Core Length | 164 mm |
| Core Width | 210 mm |
| Weight | 0.626 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 2.392 kg |
| Function | Release Fork, clutch |
| Type | Release Fork, clutch |
| for OE number | 1956 924 |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Function | Camshaft |
| Weight | 1.8 kg |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Intake Side |
| Weight | 1.53 kg |
| Function | Camshaft |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 0.690 kg |
| Additional Information | with seal rings |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100123)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£81.96
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 346 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 40 mm. 84 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 3.725 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
| Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 316 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Paired article numbers | 176295 |
| Placement on Vehicle | Front |
| Weight | 3.84 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Weight | 2.925 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Additional Information | with slide rails, with chain tensioner |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.95 kg |
| Function | Timing Chain Kit |
| Replaces | 38196 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
£81.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023