Important compatibility info
Weight | 4.600 kg |
Width | 20 mm |
Outer diameter | 490 mm |
Inner diameter | 440 mm |
Number of Teeth | 161 |
Type | Ring Gear, flywheel |
Function | Ring Gear, flywheel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.963 kg |
Thickness | 32 mm |
Number of Ribs | 4 |
Type | Oil Cooler, engine oil |
Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with seal ring |
Weight | 0.69 kg |
for OE number | 20746637 |
Type | Sender Unit, fuel tank |
Function | Sender Unit, fuel tank |
Screw length below head | 615 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Chain Type | Silent Chain, Closed chain |
Weight | 0.577 kg |
Number of Chain Links | 96 |
for OE number | 06H 109 158 N S1 |
Function | Timing Chain Kit |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (45955)
- 1x Febi Tensioner, timing chain (46275)
- 1x Febi Guide, timing chain (49535)
- 1x Febi Guide, timing chain (49533)
- 1x Febi Guide, timing chain (49534)
Important compatibility info
Weight | 0.717 kg |
Function | Cylinder Head Gasket Set, air compressor |
Type | Cylinder Head Gasket Set, air compressor |
Additional Information 2 | with bolts/screws |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,5 |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Mounting points diameter | 50 mm. 14 mm |
Piston conrod diameter | 13 mm |
Min. Length | 286 mm |
Pipe Diameter | 48 mm |
Operating Mode | Mechanical |
Placement on Vehicle | Front |
Max. Length | 346 mm |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Function | Starter |
Number of Teeth | 9 |
Rated Power | 1.8 kW |
Weight | 3.59 kg |
Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 6.510 kg |
Function | Centre Rod Assembly |
Outer diameter | 40 mm |
Cone Size | 26.2 mm |
Driver Position | for right-hand drive vehicles |
Rod/Strut | Push Rod |
Length | 730 mm |
Placement on Vehicle | Front Axle |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Operating Mode | Automatic |
Width of castor bearing surface | 40 mm |
Weight | 1.902 kg |
for OE number | 906 200 43 70 |
Outer diameter | 75 mm |
Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.303 kg |
Function | Gasket Set, automatic transmission |
Extra Description | febi Plus |
Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M30 x 1,5 |
External Thread Size | M24 x 1,5 |
Weight | 7.4 kg |
Placement on Vehicle | Front Axle Left |
Length | 635 mm |
Cone Size | 30 mm |
Adjustable | Adjustable on one side |
Pipe Diameter | 48 mm |
Type | Tie Rod |
Function | Tie Rod |
Extra Description | ProKit |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Ignition Coil |
Number of Connectors / Ports | 6 |
Ignition Coil | 4 Spark |
Weight | 0.80 kg |
Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Lower, Front Axle Left |
Additional Information | with rubber-metal mounts |
Type | Control/Trailing Arm, wheel suspension |
Paired article numbers | 179987 |
Weight | 4.55 kg |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Operating Mode | Hydraulic |
Weight | 0.27 kg |
Placement on Vehicle | Upper Right |
Paired article numbers | 12510 |
Function | Tensioner, timing chain |
Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.885 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle, Driver side |
Length | 982 mm |
Outer diameter | 48 mm |
Rod/Strut | Push Rod |
Weight | 7.900 kg |
Colour | red/brown |
Cone Size | 30 mm |
Function | Centre Rod Assembly |
Pipe Diameter | 48 mm |
Extra Description | ProKit |
External Thread Size | M24 x 1,5 |
Internal Thread Size | M30 x 1,5 |
Type | Centre Rod Assembly |
Additional Information 2 | with crown nut |
Replaces | 14485 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Bottom eye, Top pin |
Max. Length | 384 mm |
Min. Length | 272 mm |
Pipe Diameter | 34 mm |
Piston conrod diameter | 20 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 2.13 kg |
External Thread Size | M12 x 1,75 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with bearing, with ball joint |
Steering arm type | Control Arm |
Material | Cast Steel |
Function | Control/Trailing Arm, wheel suspension |
Paired article numbers | 41067 |
Weight | 5.0 kg |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right, Lower |
Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.750 kg |
Outer diameter | 40 mm |
Rod/Strut | Push Rod |
Driver Position | for right-hand drive vehicles |
Cone Size | 26 mm |
Pipe Diameter | 40 mm |
Function | Centre Rod Assembly |
Length | 709 mm |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Type | Centre Rod Assembly |
Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Internal Thread Size | M10 x 1 |
Placement on Vehicle | Rear |
Weight | 2.9 kg |
Pressure | 400 bar |
Type | Door Lock, driver cab |
Function | Door Lock, driver cab |
Additional Information 2 | without switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023