Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Bore Diameter | 10.55 mm |
| Transmission-side joint diameter | 85.1 mm |
| Additional Information 2 | with screw |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 99.5 mm |
| Function | Drive Shaft |
| Weight | 6.288 kg |
| Min. Length | 474 mm |
| Wheel Sided Joint Diameter | 97.8 mm |
| Type | Drive Shaft |
| External Teeth, Wheel Side | 36 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.44
Important compatibility info
| Weight | 0.377 kg |
| Type | Rotor Set, oil pump |
| Function | Rotor Set, oil pump |
| Extra Description | febi Plus |
| Additional Information 2 | with shaft seal, with control housing gasket |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Rotor Set, oil pump (104151)
- 1x Febi Gasket Kit, crankcase (46470)
£85.45
Important compatibility info
| Weight | 4.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 618 mm |
| Min. Length | 385 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.47
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 16 mm |
| Min. Length | 382 mm |
| Pipe Diameter | 51 mm |
| Mounting bores distance | 64.5 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Piston conrod diameter | 22 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Weight | 5.110 kg |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Max. Length | 541 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.53
Important compatibility info
| Weight | 0.982 kg |
| Material | Aluminium |
| Colour | Yellow |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.54
Important compatibility info
| Inner diameter | 170 mm |
| Height | 82.1 mm |
| Outer diameter | 403 mm |
| Placement on Vehicle | Front Axle |
| Function | Cover Sheet, brake drum |
| Weight | 2.82 kg |
| Type | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.56
Important compatibility info
| for OE number | 11 31 8 590 950 S1 |
| Number of Chain Links | 86 |
| Timing Chain Size | G53HS-7, G53HS-8 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Chain Type | Simplex, with chain lock |
| Surface | Coated |
| Weight | 0.425 kg |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28725)
- 1x Febi Guide, timing chain (177200)
£85.57
Important compatibility info
| Outer diameter | 304 mm |
| Thickness | 91 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 118 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 6 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Weight | 10.0 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.58
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 1.230 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.61
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Weight | 2.920 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Weight | 2.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Paired article numbers | 182443 |
| External Teeth, Diff.Side | 33 |
| Min. Length | 924 mm |
| Weight | 8.074 kg |
| Transmission-side joint diameter | 74 mm |
| Wheel Sided Joint Diameter | 79 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.65
Important compatibility info
| for OE number | 33220-77E00 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.052 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.66
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 660 mm |
| Piston conrod diameter | 15 mm |
| Min. Length | 398 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 2.91 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.66
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.500 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 71.5 mm |
| Max. Length | 585 mm |
| Min. Length | 390 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.69
Important compatibility info
| Weight | 0.02 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 185998 |
| Weight | 7.8 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Length | 307 mm |
| Function | Interior Blower |
| Voltage | 24 V |
| Weight | 1.897 kg |
| Type | Interior Blower |
| for OE number | 20926019 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Paired article numbers | 185999 |
| Weight | 7.8 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Thread Size | M38 x 1,5 LHT |
| Paired article numbers | 196584 |
| Bore Diameter | 24.4 mm |
| Weight | 3.009 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Thread Size | M38 x 1,5 |
| Paired article numbers | 196585 |
| Bore Diameter | 24.4 mm |
| Weight | 3.009 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.74
Important compatibility info
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Left, Right |
| Weight | 0.622 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.79
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Weight | 2.100 kg |
| Piston Diameter | 19 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.81
Important compatibility info
| Type | Shock Absorber |
| Max. Length | 571 mm |
| Piston conrod diameter | 25 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Weight | 6.200 kg |
| Pipe Diameter | 58 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Min. Length | 322 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.81
Important compatibility info
| Weight | 0.040 kg |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 86 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Extra Description | Basic Short Kit |
| Timing Chain Size | G53HS-8, G53HS-7 |
| Placement on Vehicle | Upper |
| for OE number | 11 31 8 590 950 S4 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (49508)
- 1x Febi Tensioner, timing chain (28718)
- 1x Febi Guide, timing chain (28726)
- 1x Febi Guide, timing chain (105979)
£85.84
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.2 kg |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.86
Important compatibility info
| Weight | 0.747 kg |
| Function | Brake Master Cylinder |
| Additional Information | with gasket/seal |
| Type | Brake Master Cylinder |
| Internal Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 397 mm |
| Min. Length | 256 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.87
Important compatibility info
| for OE number | 26 11 8 488 056 |
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Length | 164 mm |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (05362)
£85.88
Important compatibility info
| Weight | 0.789 kg |
| Placement on Vehicle | from hydraulic pump to steering gear |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| Weight | 0.58 kg |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| for OE number | 26 11 8 488 057 |
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Replaces | 104647 |
| Length | 164 mm |
| Inner diameter | 35 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (21311)
£85.88
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front, both sides |
| Weight | 1.114 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| Weight | 0.469 kg |
| Function | Tensioner, timing belt |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| Operating Mode | Pneumatic |
| Weight | 2.51 kg |
| Max. Length | 315 mm |
| Min. Length | 280 mm |
| Pipe Diameter | 81 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.90
Important compatibility info
| Function | Repair Kit, kingpin |
| Weight | 4.139 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 252 mm. 135 mm |
| Outer diameter | 36 mm. 50 mm |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| External Thread Size | M36 x 1,5 |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (10500)
- 1x Febi Bush, steering knuckle (09376)
- 1x Febi Bush, kingpin (14467)
- 1x Febi Washer (10502)
- 1x Febi Seal Ring, steering knuckle (14461)
- 1x Febi Seal Ring (14462)
- 1x Febi Seal Ring, steering knuckle (14459)
- 1x Febi Seal Ring, steering knuckle (14432)
- 1x Febi Spacer, kingpin (14460)
- 2x Febi Spacer, kingpin (14463)
- 4x Febi Spacer, kingpin (14464)
- 2x Febi Spacer, kingpin (14465)
- 2x Febi Spacer, kingpin (14466)
- 1x Febi Split Pin (14433)
£85.92
Important compatibility info
| Adjustable | Adjustable |
| Pipe Diameter | 40 mm |
| Weight | 6.900 kg |
| Length | 680 mm |
| Placement on Vehicle | Centre, Front Axle |
| Additional Information 2 | with crown nut |
| Type | Tie Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Tie Rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.047 kg |
| Placement on Vehicle | Left |
| Type | Actuator, seat adjustment |
| Operating Mode | Pneumatic |
| Material | Plastic |
| Function | Actuator, seat adjustment |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle, Rear Axle |
| Length | 285 mm |
| Rod/Strut | Coupling Rod |
| Pipe Diameter | 36 mm |
| Mounting points diameter | 4.2 mm |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Extra Description | ProKit |
| Weight | 3.25 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
| Voltage | 12 V |
| Operating Mode | Electric |
| for OE number | 059 121 012 B |
| Weight | 0.62 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Length | 1125 mm |
| Number of Ribs | 7 |
| Weight | 0.874 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Width of castor bearing surface | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (38434)
- 1x Febi Belt Tensioner, v-ribbed belt (27445)
£85.92
Important compatibility info
| Function | Centre Rod Assembly |
| Placement on Vehicle | Front Axle |
| Length | 891 mm |
| Outer diameter | 50 mm |
| Thickness | 90.5 mm |
| Rod/Strut | Push Rod |
| Weight | 6.065 kg |
| Cone Size | 22 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M28 x 1,5 RHT |
| External Thread Size | M18 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.802 kg |
| Outer diameter | 160 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.182 kg |
| Function | Repair Kit, gear shift lever |
| Type | Repair Kit, gear shift lever |
| for OE number | 81.32605.6111 S1 |
| Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 3.2 kg |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 430 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 45 mm. 81 mm |
| Mounting points diameter | 14 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30198 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.224 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.385 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39840 |
| Additional Information | with lock nut, with rubber mounts |
| External Thread Size | M10 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Weight | 1.795 kg |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information 2 | with nut |
| Additional Information | with axle nut |
| Function | Drive Shaft |
| Weight | 7.128 kg |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 183822 |
| External Teeth, Wheel Side | 28 |
| External Teeth, Diff.Side | 29 |
| Min. Length | 560 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 88.2 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023