Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information | with slide rails, with chain tensioner |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.95 kg |
| Function | Timing Chain Kit |
| Replaces | 38196 |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29534)
- 1x Febi Guide, timing chain (29535)
£81.96
Important compatibility info
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
| Weight | 1.2 kg |
| Additional Information 2 | with bolts/screws, with spacer plate |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 1.7 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 310 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 38 mm. 52 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 12.5 mm |
| Function | Shock Absorber, driver cab suspension |
| Replaces | 45924 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 1.280 kg |
| Material | Plastic |
| Voltage | 12 V |
| Colour | Black |
| Number of Connectors / Ports | 2 |
| Rated Power | 175 W |
| Outer diameter 1 | 73 mm |
| Outer diameter 2 | 154 mm |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd idler arm |
| Length | 628 mm |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Push Rod |
| Weight | 5.65 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Weight | 6.300 kg |
| Type | Tie Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Length | 1594 mm |
| Placement on Vehicle | Front Axle |
| Additional Information 2 | with crown nut |
| External Thread Size | M18 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Pipe Diameter | 42 mm |
| Min. Length | 231 mm |
| Max. Length | 329 mm |
| Weight | 1.3 kg |
| Piston Diameter | 12 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Bore Diameter | 10.5 mm |
| ABS Ring Diameter | 96 mm |
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 85 mm |
| Number of mounting bores | 4 |
| Weight | 6.968 kg |
| External Teeth, Wheel Side | 30 |
| Min. Length | 594 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 27 |
| Weight | 5.561 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 655 mm |
| Wheel Sided Joint Diameter | 82.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
Important compatibility info
| Cone Size | 28.6 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Pipe Diameter | 40 mm |
| Width | 40 mm |
| Thickness | 115 mm |
| Length | 743 mm |
| Weight | 7.05 kg |
| Internal Thread Size | M30 x 1,5 RHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£81.96
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023