Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 4.16 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 618 mm |
| Min. Length | 385 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.47
Important compatibility info
| Weight | 5.140 kg |
| Min. Length | 331 mm |
| Pipe Diameter | 52 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M16 x 2 |
| Max. Length | 381 mm |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.47
Important compatibility info
| Bolt Hole Circle Diameter | 114.3 mm |
| Inner diameter | 28 mm |
| Additional Information 2 | without wheel bearing |
| Outer diameter | 140 mm |
| External Teeth, Wheel Side | 28 |
| Weight | 1.903 kg |
| Type | Wheel Hub |
| Function | Wheel Hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.50
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 184531 |
| Cone Size | 16 mm |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| External Thread Size | M16 x 1,5 |
| Weight | 6.864 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 24 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.50
Important compatibility info
| Cone Size 2 | 21 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size | 17 mm |
| Additional Information | with lock nut |
| Paired article numbers | 185473 |
| Additional Information 2 | with ball joint, with bearing |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Weight | 2.617 kg |
| External Thread Size | M14 x 1,5 |
| Placement on Vehicle | Lower, Front Axle Right, Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.51
Important compatibility info
| Shock Absorber Type | Gas Pressure |
| Bore Diameter | 16 mm |
| Min. Length | 382 mm |
| Pipe Diameter | 51 mm |
| Mounting bores distance | 64.5 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Piston conrod diameter | 22 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Weight | 5.110 kg |
| Shock Absorber Design | Suspension Strut |
| Type | Shock Absorber |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Max. Length | 541 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.53
Important compatibility info
| Inner diameter | 170 mm |
| Height | 82.1 mm |
| Outer diameter | 403 mm |
| Placement on Vehicle | Front Axle |
| Function | Cover Sheet, brake drum |
| Weight | 2.82 kg |
| Type | Cover Sheet, brake drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.56
Important compatibility info
| Outer diameter | 304 mm |
| Thickness | 91 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 140 mm |
| Centering Diameter | 118 mm |
| Surface | Coated |
| Function | Brake Disc |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 6 -Hole |
| Internal Thread Size | M12 x 1,5 |
| Weight | 10.0 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.58
Important compatibility info
| Placement on Vehicle | both sides |
| Weight | 1.230 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.61
Important compatibility info
| Bore Diameter | 10.5 mm |
| ABS Ring Diameter | 96 mm |
| Function | Drive Shaft |
| Bolt Hole Circle Diameter | 110 mm |
| Thread Size | M22x1,5 |
| Wheel Sided Joint Diameter | 90 mm |
| Transmission-side joint diameter | 85 mm |
| Number of mounting bores | 4 |
| Weight | 6.968 kg |
| External Teeth, Wheel Side | 30 |
| Min. Length | 594 mm |
| Type | Drive Shaft |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Placement on Vehicle | Left |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Weight | 2.920 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Paired article numbers | 30432 |
| Weight | 3.83 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Weight | 2.930 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.62
Important compatibility info
| Type | Shock Absorber, driver cab suspension |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Function | Shock Absorber, driver cab suspension |
| Pipe Diameter | 42 mm |
| Min. Length | 231 mm |
| Max. Length | 329 mm |
| Weight | 1.3 kg |
| Piston Diameter | 12 mm |
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.63
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 23 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Inner diameter | 16 mm |
| Material | Steel |
| Weight | 10.398 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Paired article numbers | 175615 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.65
Important compatibility info
| Paired article numbers | 182443 |
| External Teeth, Diff.Side | 33 |
| Min. Length | 924 mm |
| Weight | 8.074 kg |
| Transmission-side joint diameter | 74 mm |
| Wheel Sided Joint Diameter | 79 mm |
| External Teeth, Wheel Side | 26 |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.65
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 660 mm |
| Piston conrod diameter | 15 mm |
| Min. Length | 398 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 16 mm |
| Function | Shock Absorber |
| Weight | 2.91 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.66
Important compatibility info
| for OE number | 33220-77E00 |
| Function | Sensor, crankshaft pulse |
| Type | Sensor, crankshaft pulse |
| Weight | 0.052 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.66
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Mounting, control/trailing arm |
| Weight | 2.25 kg |
| Type | Mounting, control/trailing arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Mounting, control/trailing arm (26932)
- 4x Febi Mounting, control/trailing arm (26933)
- 2x Febi Mounting, control/trailing arm (27015)
- 2x Febi Mounting, control/trailing arm (32116)
- 2x Febi Mounting, control/trailing arm (44400)
£85.67
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Design | Suspension Strut |
| Weight | 4.500 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 71.5 mm |
| Max. Length | 585 mm |
| Min. Length | 390 mm |
| Pipe Diameter | 51 mm |
| Piston conrod diameter | 22 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.69
Important compatibility info
| Weight | 0.02 kg |
| Number of Connectors / Ports | 3 |
| Type | Sensor, intake manifold pressure |
| Function | Sensor, intake manifold pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Paired article numbers | 185999 |
| Weight | 7.8 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 56.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 58.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Cast Iron |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 185998 |
| Weight | 7.8 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Length | 307 mm |
| Function | Interior Blower |
| Voltage | 24 V |
| Weight | 1.897 kg |
| Type | Interior Blower |
| for OE number | 20926019 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Thread Size | M38 x 1,5 |
| Paired article numbers | 196585 |
| Bore Diameter | 24.4 mm |
| Weight | 3.009 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with right-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.74
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 220 mm |
| Thread Size | M38 x 1,5 LHT |
| Paired article numbers | 196584 |
| Bore Diameter | 24.4 mm |
| Weight | 3.009 kg |
| Type | Tie Rod End |
| Function | Tie Rod End |
| Thread Type | with left-hand thread |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.74
Important compatibility info
| Weight | 8.4 kg |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Cone Size | 28.6 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Placement on Vehicle | Front Axle |
| Length | 869 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.76
Important compatibility info
| Placement on Vehicle | Upper |
| Weight | 0.313 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 62 |
| Timing Chain Size | G67HR-2 |
| Type | Timing Chain |
| Function | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.76
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Rear |
| Inner diameter | 16 mm |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.77
Important compatibility info
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Operating Mode | Automatic |
| Width of castor bearing surface | 40 mm |
| Weight | 1.902 kg |
| for OE number | 906 200 43 70 |
| Outer diameter | 75 mm |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.78
Important compatibility info
| Weight | 7.7 kg |
| Length | 840 mm |
| Outer diameter | 10 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Extra Description | ProKit |
| Additional Information | with castellated nut and split pins |
| Internal Thread Size | M28 x 1,5 RHT |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.79
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.79
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 76 mm. 40 mm |
| Max. Length | 265 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 2.2 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.80
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 32 mm |
| Outer diameter | 200 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Weight | 2.100 kg |
| Piston Diameter | 19 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.81
Important compatibility info
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Cone Size | 32 mm |
| Weight | 5.000 kg |
| Rod/Strut | Push Rod |
| Additional Information | with nuts |
| Thread Size | M27 x 1,5 |
| Length | 507 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.81
Important compatibility info
| Type | Shock Absorber |
| Max. Length | 571 mm |
| Piston conrod diameter | 25 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Weight | 6.200 kg |
| Pipe Diameter | 58 mm |
| External Thread Size | M14 x 1,5 |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Min. Length | 322 mm |
| Shock Absorber Design | Suspension Strut |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Mounting Type | Top pin, bottom steering knuckle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.81
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Weight | 1.477 kg |
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 176910 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.84
Important compatibility info
| Pipe Diameter | 52.7 mm |
| Function | Centre Rod Assembly |
| Length | 904 mm |
| Rod/Strut | Push Rod |
| Weight | 9.982 kg |
| Cone Size | 32.2 mm |
| External Thread Size | M27 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Replaces | 28280 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.85
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.2 kg |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.86
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Type | Repair Kit, suspension strut support mount |
| Function | Repair Kit, suspension strut support mount |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
| Paired article numbers | 182139 |
| Weight | 1.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (39574)
- 1x Febi Rolling Bearing, suspension strut support mount (179052)
- 3x Febi Nut (37858)
£85.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 397 mm |
| Min. Length | 256 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Piston conrod diameter | 12.5 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.87
Important compatibility info
| Weight | 0.747 kg |
| Function | Brake Master Cylinder |
| Additional Information | with gasket/seal |
| Type | Brake Master Cylinder |
| Internal Thread Size | M12 x 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.87
Important compatibility info
| for OE number | 26 11 8 488 056 |
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Length | 164 mm |
| Inner diameter | 30 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (05362)
£85.88
Important compatibility info
| Material | Steel |
| Weight | 7.000 kg |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Cone Size | 28.6 mm |
| External Thread Size | M20 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Front, both sides |
| Weight | 1.114 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Additional Information 2 | with splash protection cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| for OE number | 26 11 8 488 057 |
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
| Replaces | 104647 |
| Length | 164 mm |
| Inner diameter | 35 mm |
| Bearing Type | Ball Bearing |
| Hole Spacing | 144 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension, propshaft (186494)
- 1x Febi Bearing, propshaft centre bearing (21311)
£85.88
Important compatibility info
| Number of Chain Links | 56 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Chain Type | Silent Chain, Closed chain |
| Weight | 0.127 kg |
| Additional Information 2 | Requires special tools for mounting |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (108992)
- 1x Febi Chain Tensioner, oil pump drive (109343)
£85.88
Important compatibility info
| Weight | 0.789 kg |
| Placement on Vehicle | from hydraulic pump to steering gear |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
Important compatibility info
| Placement on Vehicle | Upper |
| Timing Chain Size | G68HR |
| Number of Chain Links | 206 |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain |
| Weight | 0.85 kg |
| Additional Information 2 | Requires special tools for mounting |
| Type | Timing Chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.88
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023