Proud to be a UK-based company
Contact us
Important compatibility info
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Min. Length | 316 mm |
| Max. Length | 379 mm |
| Pipe Diameter | 41.5 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Paired article numbers | 176295 |
| Placement on Vehicle | Front |
| Weight | 3.84 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 7.55 kg |
| Placement on Vehicle | Front Axle, from the steering gear to the 1st idler arm |
| Length | 882 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 0.524 kg |
| Material | FPM (fluoride rubber), MVQ (silicone rubber) |
| Inner diameter | 90 mm |
| Colour | Red |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Charge Air Hose |
| Wall Thickness | 4 mm |
| Hose Length | 160 mm |
| Outer diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (30183)
- 2x Febi Fastening Clamp, charge air hose (39027)
£86.91
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| Weight | 14.250 kg |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 3.180 kg |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| for OE number | 06 52 133 S1 |
| Seal Material | NBR (nitrile butadiene rubber) |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (29469)
- 1x Febi Gasket, oil sump (04610)
£86.91
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Cone Size | 22 mm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Length | 1550 mm |
| Outer diameter | 40 mm |
| Weight | 7.256 kg |
| External Thread Size | M18 x 1,5, M28 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 1.84 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 60 mm |
| Outer diameter | 255 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Weight | 1.72 kg |
| Piston Diameter | 19.1 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Rotor Style | Solid |
| Weight | 5.11 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 249 mm |
| Thickness | 67.2 mm |
| Brake Disc Thickness | 9 mm |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63.4 mm |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 4 -Hole |
| Additional Information 2 | with ABS sensor ring, with grease cap |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Weight | 1.734 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.93
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023