Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 8.1 kg |
| Placement on Vehicle | Front Axle |
| Length | 787 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Width | 27 mm |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Number of Ribs | 6 |
| Inner diameter | 15 mm |
| Outer diameter | 155 mm. 30 mm |
| Thickness | 60 mm |
| Type | Belt Pulley, crankshaft |
| Weight | 2.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Weight | 0.866 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Steering arm type | Control Arm |
| Weight | 1.941 kg |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Placement on Vehicle | Rear, Lower, Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 346 mm |
| Min. Length | 281 mm |
| Pipe Diameter | 40 mm. 84 mm |
| Mounting points diameter | 14 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 3.725 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.270 kg |
| Width of castor bearing surface | 30 mm |
| Outer diameter | 65 mm |
| Operating Mode | Mechanical |
| Type | Belt Tensioner, v-ribbed belt |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 5.101 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle, Front Axle Right |
| Length | 222.5 mm |
| Outer diameter | 50 mm |
| Paired article numbers | 15906 |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Extra Description | ProKit |
| Additional Information | with Thrust Bearing |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (35012)
- 1x Febi Bush, steering knuckle (05132)
- 4x Febi Bush, steering knuckle (08524)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Spacer, kingpin (15891)
£82.95
Important compatibility info
| Length | 1675 mm |
| Number of Ribs | 7 |
| Weight | 0.962 kg |
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Tensile Cord Material | Polyester |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (180079)
- 1x Febi Belt Tensioner, v-ribbed belt (36831)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (36826)
£82.95
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Left |
| Additional Information | with rubber-metal mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179987 |
| Weight | 4.55 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 224 mm |
| Pipe Diameter | 76 mm. 40 mm |
| Max. Length | 265 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 2.2 kg |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Repair Kit, guide strut |
| Type | Repair Kit, guide strut |
| Weight | 2.158 kg |
| Length | 150 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184530 |
| Weight | 6.864 kg |
| Cone Size | 16 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 24 mm |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 0.690 kg |
| Additional Information | with seal rings |
| Material | Aluminium |
| Function | Oil Cooler, automatic transmission |
| Transmission Type | Automatic Transmission |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100123)
- 2x Febi Seal Ring, oil cooler (lubrication) (100122)
£82.95
Important compatibility info
| Weight | 1.98 kg |
| Spanner Size | 19 |
| Length | 435 mm |
| External Thread Size | M10 |
| Extra Description | febi Plus |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with bore for oil-level sensor, with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 3.832 kg |
| Type | Release Fork, clutch |
| Function | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
| for OE number | 2 692 141 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Function | Camshaft |
| Weight | 1.5 kg |
| Type | Camshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Extra Description | ProKit |
| Additional Information | with nuts |
| Placement on Vehicle | Front Axle |
| Length | 849 mm |
| Rod/Strut | Push Rod |
| Adjustable | Adjustable on one side |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Weight | 6.55 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Cone Size | 22 mm |
| Additional Information 2 | with crown nut |
| Placement on Vehicle | Front Axle |
| Length | 1550 mm |
| Outer diameter | 40 mm |
| Weight | 7.256 kg |
| External Thread Size | M18 x 1,5, M28 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M33x1,5 |
| Wheel Sided Joint Diameter | 112 mm |
| Transmission-side joint diameter | 103.5 mm |
| Type | Drive Shaft |
| Weight | 14.250 kg |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1086 mm |
| External Teeth, Wheel Side | 35 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.4 kW |
| Weight | 2.925 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Operating Mode | Manual |
| Type | Tilt Pump, driver cab |
| Weight | 2.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information | with gasket/seal, with fastening/mounting material |
| Type | Heat Exchanger, interior heating |
| Function | Heat Exchanger, interior heating |
| Core Depth | 32 mm |
| Core Length | 164 mm |
| Core Width | 210 mm |
| Weight | 0.626 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Weight | 1.46 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Function | Interior Blower |
| Type | Interior Blower |
| for OE number | 6441.T8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.95
Important compatibility info
| Additional Information 2 | with ball joint |
| Placement on Vehicle | Front Axle Right |
| Material | Aluminium |
| Steering arm type | Triangular Control Arm (CV) |
| Paired article numbers | 179106 |
| Weight | 4.850 kg |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 2.245 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203.2 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Weight | 2.14 kg |
| Placement on Vehicle | Rear Axle |
| Width | 38 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.96
Important compatibility info
| Function | Drive Shaft |
| Number of Teeth, ABS ring | 48 |
| Transmission-side joint diameter | 108 mm |
| Min. Length | 537 mm |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| ABS Ring Diameter | 104 mm |
| Weight | 7.250 kg |
| Bore Diameter | 10.5 mm |
| Additional Information 2 | with bolts/screws |
| Thread Size | M16x1,5 |
| External Teeth, Wheel Side | 38 |
| Wheel Sided Joint Diameter | 97.9 mm |
| Number of mounting bores | 6 |
| Bolt Hole Circle Diameter | 94 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.98
Important compatibility info
| Weight | 0.065 kg |
| Number of Connectors / Ports | 4 |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| Housing Type | without housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Length | 760 mm |
| Width | 56 mm |
| Thickness | 38 mm |
| Weight | 0.06 kg |
| Function | Switch, steering column adjustment |
| Type | Switch, steering column adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£82.99
Important compatibility info
| Weight | 1.7 kg |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Material | Cast Aluminium |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
| Vehicle Equipment | for vehicles with start-stop function |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Function | Brake Disc |
| Centering Diameter | 56 mm |
| Surface | Oiled |
| Minimum thickness | 7 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 69.2 mm |
| Brake Disc Thickness | 9 mm |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 248 mm |
| Rim Hole Number | 4 -Hole |
| Weight | 5.56 kg |
| Rotor Style | Solid |
| Type | Brake Disc Rotor |
| Additional Information 2 | with ABS sensor ring, with grease cap |
| Hub external diameter | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.00
Important compatibility info
| Weight | 0.531 kg |
| Number of Connectors / Ports | 2 |
| Type | Auxiliary water pump (cooling water circuit) |
| Function | Auxiliary water pump (cooling water circuit) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.01
Important compatibility info
| Weight | 10.38 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 4 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 34.3 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 71.1 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.02
Important compatibility info
| Water pump impeller material | Plastic |
| Number of Wings | 6 |
| Weight | 0.6 kg |
| Additional Information | with gaskets/seals |
| Pulleys | with belt pulley |
| Additional Information 2 | switchable water pump, with bolts/screws |
| Function | Water Pump, engine cooling |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.03
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 118 |
| Timing Chain Size | G53HR |
| Function | Timing Chain Kit |
| Weight | 0.555 kg |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (25371)
- 1x Febi Tensioner, timing chain (49496)
- 1x Febi Guide, timing chain (49504)
- 1x Febi Guide, timing chain (49503)
- 1x Febi Guide, timing chain (49499)
- 1x Febi Seal Ring (05552)
£83.07
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 6 |
| Function | Water Pump, engine cooling |
| Seal Material | Metal |
| Weight | 0.901 kg |
| Additional Information | with gasket/seal |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.07
Important compatibility info
| Weight | 10.920 kg |
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 335 mm |
| Thickness | 45.1 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.11
Important compatibility info
| Function | Control Valve, camshaft adjustment |
| Type | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
| Placement on Vehicle | Intake Side |
| Weight | 0.315 kg |
| Additional Information | with gasket/seal |
| Additional Information 2 | with screw set |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.16
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 10.39 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 365 mm |
| Thickness | 48.6 mm |
| Brake Disc Thickness | 25 mm |
| Minimum thickness | 22 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 79 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.17
Important compatibility info
| Transmission-side joint diameter | 92.5 mm |
| External Teeth, Diff.Side | 31 |
| Min. Length | 542 mm |
| Wheel Sided Joint Diameter | 92.2 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| External Teeth, Wheel Side | 40 |
| Weight | 7.078 kg |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.18
Important compatibility info
| Weight | 2.266 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
| Placement on Vehicle | Left |
| Paired article numbers | 180460 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.19
Important compatibility info
| Weight | 1.22 kg |
| Function | Repair Kit, suspension strut support mount |
| Outer diameter | 177 mm |
| Material | Rubber/Metal |
| Placement on Vehicle | Front Axle |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing |
| Inner diameter | 14 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.19
Important compatibility info
| Function | Timing Chain |
| Type | Timing Chain |
| Number of Chain Links | 108 |
| Chain Type | Simplex, Closed chain |
| Weight | 0.586 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.20
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 300 mm |
| Thickness | 55.7 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 19.4 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Machining | High-carbon |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Weight | 7.23 kg |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.21
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 4.775 kg |
| Placement on Vehicle | Front Axle Right, Front |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with fastening/mounting material |
| Material | Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 175034 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 24 mm |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (174786)
- 1x Febi Screw (37673)
- 1x Febi Nut (34653)
£83.21
Important compatibility info
| Rotor Style | perforated/vented |
| Weight | 9.3 kg |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Outer diameter | 320 mm |
| Thickness | 51.1 mm |
| Brake Disc Thickness | 30 mm |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.24
Important compatibility info
| Weight | 0.385 kg |
| Additional Information 2 | Requires special tools for mounting |
| Function | Timing Chain |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 152 |
| Type | Timing Chain |
| Number of markings | 3 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.27
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.43 kg |
| Bolt Hole Circle Diameter | 114.3 mm |
| Centering Diameter | 69 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Minimum thickness | 26.4 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 49.1 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 321 mm |
| Type | Brake Disc Rotor |
| for OE number | 51712-2B700 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.28
Important compatibility info
| Placement on Vehicle | both sides, Rear |
| Inner diameter | 13 mm. 14 mm |
| Weight | 3.5 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Internal Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.28
Important compatibility info
| Surface | PTFE (Polytetrafluorethylene) coated |
| Weight | 1.36 kg |
| Width | 25.4 mm |
| Number of Teeth | 141 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (39203)
- 1x Febi Water Pump, engine cooling (24528)
£83.28
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023