Proud to be a UK-based company
Contact us
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Function | Tie Rod |
| Placement on Vehicle | Front Axle, Centre |
| Additional Information 2 | with crown nut |
| Length | 1605 mm |
| Type | Tie Rod |
| Pipe Diameter | 40 mm |
| Weight | 9.010 kg |
| Cone Size | 30 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| External Thread Size | M8 x 1,25 |
| Length | 153 mm. 180 mm |
| Outer diameter | 43 mm |
| Bolt Hole Circle Diameter | 16 mm |
| Internal Thread Size | M12 x 1,5 |
| Weight | 0.464 kg |
| Function | Slave Cylinder / Slave Cylinder, engine brake |
| Type | Slave Cylinder / Slave Cylinder, engine brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Weight | 7.760 kg |
| External Teeth, Diff.Side | 37 |
| External Teeth, Wheel Side | 27 |
| Thread Size | M24x1,5 |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Left |
| Transmission-side joint diameter | 89 mm |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| Weight | 9.005 kg |
| Placement on Vehicle | Front Axle |
| Length | 966 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Length | 550 mm |
| Width | 250 mm |
| Material | Metal |
| Thickness | 1.4 mm |
| Function | Gasket, cylinder head |
| Weight | 0.421 kg |
| Type | Gasket, cylinder head |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Length | 248 mm |
| Outer diameter | 165 mm |
| Weight | 7.02 kg |
| Function | Suspension Spring |
| Number of Coils | 6 |
| Placement on Vehicle | Rear Axle |
| Wire Diameter | 22 mm |
| Type | Suspension Spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Outer length 1 | 1164 mm |
| Weight | 1.142 kg |
| Type | Cable Pull, manual transmission |
| Inner length 1 | 940 mm |
| Function | Cable Pull, manual transmission |
| Inner length 2 | 887 mm |
| Outer length 2 | 1237 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M18x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 4.534 kg |
| External Teeth, Diff.Side | 22 |
| Min. Length | 640 mm |
| Wheel Sided Joint Diameter | 80 mm |
| Transmission-side joint diameter | 69 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Extra Description | febi Plus |
| Function | Control Valve, camshaft adjustment |
| for OE number | 271 050 05 78 |
| Type | Control Valve, camshaft adjustment |
| Weight | 0.106 kg |
| Placement on Vehicle | Exhaust Side, Intake Side |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Solenoid Valve, shift cylinder |
| Number of Holes | 2 |
| Type | Solenoid Valve, shift cylinder |
| Weight | 0.319 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 2.3 kg |
| Type | Cylinder Head, air compressor |
| Function | Cylinder Head, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| External Thread Size | M12 x 1,5 |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 14 mm |
| Piston conrod diameter | 13 mm |
| Min. Length | 286 mm |
| Pipe Diameter | 48 mm |
| Operating Mode | Mechanical |
| Placement on Vehicle | Front |
| Max. Length | 346 mm |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Weight | 1.5 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 3.43 kg |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 420 mm |
| Min. Length | 315 mm |
| Pipe Diameter | 82 mm. 44 mm |
| Mounting points diameter | 20 mm. 32 mm |
| Piston conrod diameter | 13 mm |
| Function | Shock Absorber, driver cab suspension |
| External Thread Size | M6 x 1 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Function | Tensioner, timing chain |
| Weight | 0.215 kg |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Weight | 2.56 kg |
| Placement on Vehicle | Right |
| Operating Mode | Manual |
| Number of Connectors / Ports | 2 |
| Function | Tilt Pump, driver cab |
| Pressure side external thread size | M14 x 1,5 |
| Suction side external thread size | M14 x 1,5 |
| Type | Tilt Pump, driver cab |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Max. Length | 326 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 12 mm |
| Min. Length | 171 mm |
| Pipe Diameter | 41 mm. 101 mm |
| Weight | 3.8 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Operating Mode | Mechanical |
| Placement on Vehicle | Rear |
| Paired article numbers | 178446 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.94
Important compatibility info
| Material | Grey Cast Iron |
| Number of Wings | 9 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Weight | 9.235 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 904 200 49 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.98
Important compatibility info
| Weight | 1.1 kg |
| Placement on Vehicle | Rear |
| Length | 1915 mm. 745 mm |
| Function | Cable Pull, parking brake |
| Type | Cable Pull, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£83.99
Important compatibility info
| Weight | 1.19 kg |
| Width | 28 mm |
| Number of Teeth | 141 |
| Belts | with trapezoidal tooth profile |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (11207)
- 1x Febi Tensioner Pulley, timing belt (04927)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (04749)
£84.01
Important compatibility info
| Weight | 3.7 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 388 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 80 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.01
Important compatibility info
| Weight | 9.5 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 298 mm |
| Thickness | 97.9 mm |
| Inner diameter | 254 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.03
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 0.062 kg |
| Number of Connectors / Ports | 2 |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | Exhaust Turbocharger |
| Cable Length | 366 mm |
| Function | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.05
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 48096 |
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 0.96 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.08
Important compatibility info
| Surface | Coated |
| Mounting points diameter | 14.5 mm |
| Bolt Hole Circle Diameter | 111 mm |
| Centering Diameter | 83 mm |
| Outer diameter | 301 mm |
| Minimum thickness | 27 mm |
| Thickness | 59 mm |
| Brake Disc Thickness | 30 mm |
| Function | Brake Disc |
| Weight | 10.3 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Rim Hole Number | 9 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.13
Important compatibility info
| Placement on Vehicle | Right Rear |
| Paired article numbers | 179681 |
| Additional Information | with adjuster |
| Function | Door Lock |
| Extra Description | febi Plus |
| Weight | 0.588 kg |
| Lock System | with double sealing |
| Number of Connectors / Ports | 6 |
| Operating Mode | Electric |
| Type | Door Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.14
Important compatibility info
| Placement on Vehicle | Left Rear |
| Additional Information | with adjuster |
| Paired article numbers | 197575 |
| Number of Connectors / Ports | 6 |
| Weight | 0.9 kg |
| Type | Door Lock |
| Function | Door Lock |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.14
Important compatibility info
| Weight | 1.45 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Rated Power | 176,4 W |
| Function | Interior Blower |
| Type | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.14
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.067 kg |
| External Thread Size | M14 x 1,5 |
| Type | Sensor, exhaust gas temperature |
| Cable Length | 984 mm |
| Function | Sensor, exhaust gas temperature |
| Placement on Vehicle | after soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.15
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 456 mm |
| Max. Length | 456 mm |
| Min. Length | 298 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.15
Important compatibility info
| Weight | 4.0 kg |
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 39351 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with holder, with rubber mounts |
| Additional Information 2 | with ball joint |
Additional Information
Technical Information
After mounting the screw of the back-end control arm bush has to be tightened with 55 Nm + 90° + 15°
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Mounting, control/trailing arm (36595)
£84.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023