Proud to be a UK-based company
Contact us
Important compatibility info
| Steering arm type | Control Arm |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 184531 |
| Cone Size | 16 mm |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts, with lock nut |
| Material | Sheet Steel |
| External Thread Size | M16 x 1,5 |
| Weight | 6.864 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 24 mm |
| Placement on Vehicle | Front Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Weight | 3.85 kg |
| Bolt Hole Circle Diameter | 116 mm |
| Type | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Width | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 30 mm |
| Additional Information 2 | with ABS sensor ring |
| Outer diameter | 148 mm |
| Function | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Thread Size | M10x1,5 |
| Additional Information 2 | with screw |
| Weight | 7.506 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 943 mm |
| Wheel Sided Joint Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82 mm |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Operating Mode | Hydraulic |
| Weight | 0.27 kg |
| Placement on Vehicle | Upper Right |
| Paired article numbers | 12510 |
| Function | Tensioner, timing chain |
| Type | Tensioner, timing chain |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Weight | 0.885 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Weight | 6.510 kg |
| Function | Centre Rod Assembly |
| Outer diameter | 40 mm |
| Cone Size | 26.2 mm |
| Driver Position | for right-hand drive vehicles |
| Rod/Strut | Push Rod |
| Length | 730 mm |
| Placement on Vehicle | Front Axle |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Pipe Diameter | 38 mm |
| Type | Centre Rod Assembly |
| Cone Size | 32 mm |
| Weight | 5.000 kg |
| Rod/Strut | Push Rod |
| Additional Information | with nuts |
| Thread Size | M27 x 1,5 |
| Length | 507 mm |
| Placement on Vehicle | Front Axle |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Width of castor bearing surface | 32 mm |
| Extra Description | febi Plus |
| Function | Belt Tensioner, V-ribbed belt |
| Type | Belt Tensioner, V-ribbed belt |
| Weight | 2.516 kg |
| Operating Mode | Automatic |
| Outer diameter | 70 mm |
| Material | Metal |
| Width | 76 mm |
| Replaces | 170320 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Voltage | 12 V |
| Function | Starter |
| Number of Teeth | 9 |
| Rated Power | 1.8 kW |
| Weight | 3.59 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Additional Information 2 | with dryer |
| Weight | 2.287 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 391 mm |
| Core Width | 647 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Weight | 6.6 kg |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Rated Power | 1.7 kW |
| Weight | 3.76 kg |
| Number of Teeth | 10 |
| Type | Starter |
| Voltage | 12 V |
| Function | Starter |
| for OE number | 02E 911 023 HX |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Bottom eye, Top pin |
| Max. Length | 384 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 34 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 2.13 kg |
| External Thread Size | M12 x 1,75 |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Weight | 0.303 kg |
| Function | Gasket Set, automatic transmission |
| Extra Description | febi Plus |
| Type | Gasket Set, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Length | 290 mm |
| Outer diameter | 53 mm |
| Additional Information 2 | with pressure switch (high pressure side), with pressure switch (low pressure side), with pressure switch |
| Number of Connectors / Ports | 3 |
| Weight | 0.8 kg |
| Number of mounting bores | 2 |
| Mounting points diameter | 10 mm |
| Type | Dryer, air conditioning |
| Function | Dryer, air conditioning |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Weight | 1.572 kg |
| Material | Plastic |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Function | Seal Kit, multi-valve |
| Additional Information 2 | with spacer plate |
| Weight | 1.15 kg |
| Type | Seal Kit, multi-valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Placement on Vehicle | Front Axle |
| External Thread Size | M18 x 1,5 |
| Length | 1620 mm |
| Rod/Strut | Push Rod |
| Cone Size | 22 mm |
| Pipe Diameter | 36 mm |
| Internal Thread Size | M28 x 1,5 RHT, M28 x 1,5 LHT |
| Weight | 7.800 kg |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
Important compatibility info
| Paired article numbers | 08520 |
| Function | Repair Kit, kingpin |
| Weight | 2.71 kg |
| Additional Information | with Thrust Bearing |
| Length | 217 mm |
| Outer diameter | 38 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (08512)
- 4x Febi Bush, steering knuckle (08513)
- 2x Febi Seal Ring, steering knuckle (08514)
- 2x Febi Circlip (04328)
- 1x Febi Pressure Piece, kingpin (01500)
- 1x Febi Nut (02574)
- 1x Febi Springwasher (07583)
- 1x Febi Lock Ring, steering knuckle (04326)
- 1x Febi Lock Ring, steering knuckle (04325)
- 1x Febi Spacer, kingpin (08516)
- 1x Febi Spacer, kingpin (08517)
- 2x Febi Seal Ring, steering knuckle (04327)
£84.93
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Weight | 5.45 kg |
| Placement on Vehicle | Front Axle |
| Length | 860 mm |
| Width | 62 mm |
| Thickness | 115 mm |
| Rod/Strut | Push Rod |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£84.93
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023