Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 8.265 kg |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Length | 863 mm |
| Width | 42 mm |
| Thickness | 42 mm |
| Rod/Strut | Push Rod |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| Driver Position | for left-hand/right-hand drive vehicles |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.52
Important compatibility info
| Length | 180 mm |
| Height | 128 mm |
| Width | 111 mm |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
| Weight | 1.15 kg |
| Type | Housing, oil filter |
| Function | Housing, oil filter |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.53
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M22x,15 |
| External Teeth, Wheel Side | 26 |
| Weight | 6.142 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 896 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.54
Important compatibility info
| Weight | 3.204 kg |
| Placement on Vehicle | transmission sided |
| Additional Information 2 | with bolts/screws |
| Function | Release Fork, clutch |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Additional Information | with cross pin, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Release Fork, clutch (22752)
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
£88.56
Important compatibility info
| Operating Mode | Electronic |
| Weight | 0.55 kg |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
| for OE number | 970 300 03 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| Function | Repair Kit, kingpin |
| Length | 223 mm |
| Outer diameter | 50 mm |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Weight | 5.2 kg |
| Additional Information 2 | with rolling bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15337)
- 1x Febi Bush, kingpin (15336)
- 1x Febi Bush, steering knuckle (34565)
- 2x Febi Bush, steering knuckle (08524)
- 2x Febi Repair Kit, kingpin (15335)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Seal Ring, steering knuckle (03727)
- 2x Febi Circlip (03729)
- 2x Febi Grease Nipple (01097)
£88.57
Important compatibility info
| Weight | 2.2 kg |
| Length | 228 mm |
| Width | 45 mm |
| Outer diameter | 171 mm |
| Inner diameter | 100 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| Rotor Style | Externally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 323 mm |
| Thickness | 59.5 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 68 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 10.5 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.59
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 10.110 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 332 mm |
| Thickness | 55.1 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26.4 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.59
Important compatibility info
| for OE number | 89465-48110 |
| Spanner Size | 22 |
| Weight | 0.123 kg |
| Cable Length | 800 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.60
Important compatibility info
| Weight | 1.422 kg |
| for OE number | 03C 115 105 N SK |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.61
Important compatibility info
| Weight | 1.33 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.61
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 11 |
| Function | Starter |
| Type | Starter |
| Weight | 5.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.67
Important compatibility info
| Weight | 9.5 kg |
| External Thread Size | M12 x 1,5, M20 x 1,5 |
| Outer diameter | 228 mm. 258 mm |
| Thickness | 180 mm. 525 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.67
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Placement on Vehicle | Front Axle |
| Length | 776 mm. 726 mm |
| Rod/Strut | Push Rod |
| Weight | 6.6 kg |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Additional Information | with nuts |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22 x 1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.977 kg |
| External Teeth, Diff.Side | 23 |
| Min. Length | 932 mm |
| Wheel Sided Joint Diameter | 81.4 mm |
| Transmission-side joint diameter | 80.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.69
Important compatibility info
| Placement on Vehicle | Front Axle Right, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.790 kg |
| Paired article numbers | 32231 |
| External Thread Size | M10 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bearing, with ball joint |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.78
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.535 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£88.80
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.4 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 336 mm |
| Thickness | 52 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 63 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.81
Important compatibility info
| Weight | 3.180 kg |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| for OE number | 06 52 133 S1 |
| Seal Material | NBR (nitrile butadiene rubber) |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (29469)
- 1x Febi Gasket, oil sump (04610)
£88.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023