Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 8.97 kg |
| Placement on Vehicle | Front Axle |
| Length | 988 mm |
| Width | 50 mm |
| Thickness | 116 mm |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 |
| External Thread Size | M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Length | 130 mm |
| Width | 130 mm |
| Thickness | 100.9 mm |
| Weight | 4.136 kg |
| Hole Spacing | 92 mm |
| Function | Cylinder Liner, air compressor |
| Type | Cylinder Liner, air compressor |
| Additional Information | with retaining rings, with piston, with piston rings, with piston pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| for OE number | 000 260 50 98 |
| Weight | 0.17 kg |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| Fill Medium | Brake Fluid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 3.83 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30433 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 2.13 kg |
| Function | Fan, engine cooling |
| Number of Wings | 7 |
| Number of Connectors / Ports | 2 |
| Rated Power | 450 W |
| Thickness | 100 mm |
| Outer diameter | 420 mm |
| Type | Fan, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 2.6 kg |
| Inner diameter | 13 mm |
| Number of Ribs | 5 |
| Outer diameter 1 | 139 mm |
| Parameter | 6PK |
| Outer diameter 2 | 144 mm |
| Type | Belt Pulley, crankshaft |
| Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 3.2 kg |
| External Thread Size | M10 x 1 |
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 430 mm |
| Min. Length | 287 mm |
| Pipe Diameter | 45 mm. 81 mm |
| Mounting points diameter | 14 mm. 20 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.422 kg |
| for OE number | 03C 115 105 N SK |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.385 kg |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Operating Mode | Automatic |
| Number of Ribs | 7 |
| Outer diameter | 74 mm |
| Track rollers material | Plastic |
| Material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 34 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 5.18 kg |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 170965 |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, without bearing |
| Additional Information | with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Colour | Black |
| Weight | 0.684 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| Additional Information | with gasket/seal |
| Material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.047 kg |
| Placement on Vehicle | Left |
| Type | Actuator, seat adjustment |
| Operating Mode | Pneumatic |
| Material | Plastic |
| Function | Actuator, seat adjustment |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16 x 1,5 |
| External Teeth, Wheel Side | 36 |
| Weight | 6.557 kg |
| External Teeth, Diff.Side | 40 |
| Min. Length | 500 mm |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 85 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.963 kg |
| Thickness | 32 mm |
| Number of Ribs | 4 |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Bolt Hole Circle Diameter | 104 mm |
| Bore Diameter | 11 mm |
| External Teeth, Wheel Side | 42 |
| Weight | 6.190 kg |
| Number of mounting bores | 6 |
| Min. Length | 462 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 123 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Thread Size | M16x1,5 |
| Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Pipe Diameter | 76 mm. 63 mm |
| Min. Length | 342 mm |
| Max. Length | 534 mm |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Weight | 4.77 kg |
| Placement on Vehicle | Rear Axle |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information | with gasket/seal |
| Weight | 1.770 kg |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information | with seal rings |
| Function | Oil Cooler, automatic transmission |
| Material | Aluminium |
| Transmission Type | Automatic Transmission |
| Weight | 0.740 kg |
| Type | Oil Cooler, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Cooler, automatic transmission (100131)
- 2x Febi Seal Ring (100121)
£85.92
Important compatibility info
| Weight | 11.85 kg |
| Placement on Vehicle | Front Axle |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 LHT |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Additional Information 2 | with crown nut |
| Outer diameter | 40 mm |
| Length | 1736 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Cone Size | 30 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Placement on Vehicle | Front Axle |
| Rod/Strut | Push Rod |
| Internal Thread Size | M30 x 1,5 |
| Weight | 6.093 kg |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with crown nut and split pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.983 kg |
| Paired article numbers | 15857 |
| Outer diameter | 54 mm |
| Type | Repair Kit, kingpin |
| Function | Repair Kit, kingpin |
| Additional Information | without kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Bush, steering knuckle (15860)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Washer (15887)
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30198 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.224 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Rod/Strut | Push Rod |
| Placement on Vehicle | Front Axle |
| Cone Size | 28.6 mm |
| Pipe Diameter | 42 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm. 783 mm |
| Weight | 6.7 kg |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M27 x 1,5, M24 x 1,5 |
| Function | Centre Rod Assembly |
| Cone Size | 32 mm. 30 mm |
| Rod/Strut | Push Rod |
| Outer diameter | 38 mm |
| Length | 885 mm |
| Weight | 6.568 kg |
| Extra Description | ProKit |
| Additional Information | with nuts |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 30199 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 4.224 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Triangular Control Arm (CV), Control Arm |
| Paired article numbers | 179105 |
| Weight | 4.850 kg |
| Cone Size | 24 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 3.429 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 406 mm |
| Min. Length | 360 mm |
| Mounting points diameter | 14 mm |
| Operating Mode | Pneumatic |
| Piston conrod diameter | 14 mm |
| Placement on Vehicle | Rear |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Right |
| Driver Position | for right-hand drive vehicles |
| Inner length 2 | 1010 mm |
| Inner length 1 | 965 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Weight | 1.332 kg |
| Outer length 1 | 1225 mm |
| Outer length 2 | 1300 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.05 kg |
| Function | Clutch, radiator fan |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 0.9 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 2 |
| Function | EGR Valve |
| Type | EGR Valve |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Weight | 1.222 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1573 mm |
| Inner length 2 | 1252 mm |
| Outer length 1 | 1880 mm |
| Outer length 2 | 1604 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Additional Information 2 | with dryer |
| Weight | 2.165 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 320 mm |
| Core Width | 735 mm |
| Core Depth | 16 mm |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170964 |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Weight | 5.18 kg |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.92
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 44 mm |
| Weight | 3.4 kg |
| Paired article numbers | 186528 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.95
Important compatibility info
| Weight | 3.4 kg |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Function | Brake Caliper |
| Paired article numbers | 186527 |
| Material | Cast Iron |
| Brake caliper piston diameter | 44 mm |
| Type | Brake Caliper |
| Vehicle Equipment | for vehicles with electric parking brake |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.95
Important compatibility info
| Number of Connectors / Ports | 4 |
| Function | Sensor, engine oil level |
| Type | Sensor, engine oil level |
| Weight | 0.198 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.95
Important compatibility info
| Weight | 0.398 kg |
| Number of Connectors / Ports | 14 |
| Combi Switch Function | with klaxon, with high beam function, with indicator function, with wipe-wash function |
| Type | Steering Column Switch |
| Function | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.95
Important compatibility info
| Number of Connectors / Ports | 5 |
| Housing Type | with housing |
| Weight | 0.248 kg |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 113 094 00 48 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.98
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Placement on Vehicle | Right |
| Weight | 1.410 kg |
| for OE number | 11 37 520 39R |
| Bearing/Mounting Type | Hydro Mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£85.99
Important compatibility info
| Function | Bellow, air suspension |
| Outer diameter | 197 mm. 228 mm |
| Thickness | 180 mm. 350 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Weight | 6.9 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5, M14 x 2 |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.02
Important compatibility info
| Additional Information | with gasket/seal |
| Material | Plastic |
| Colour | Black |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
| for OE number | 03L 103 469 AD |
| Weight | 0.981 kg |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.03
Important compatibility info
| Weight | 0.5 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 64 |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HP, G53HR |
| Wet Boiling Point | 110 °C |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Gear, balance shaft (40264)
- 1x Febi Chain, oil pump drive (25357)
- 1x Febi Chain Tensioner, oil pump drive (25417)
£86.04
Important compatibility info
| Additional Information | with nuts |
| Weight | 1.46 kg |
| Extra Description | ProKit |
| Type | Joint, propshaft |
| Function | Joint, propshaft |
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information 2 | with bolts/screws |
| Number of Holes | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (26293)
- 1x Febi Assembly Kit, propshaft joint (43515)
£86.05
Important compatibility info
| Additional Information | with rubber mounts |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38285 |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 8.405 kg |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 152 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38282)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
£86.07
Important compatibility info
| Additional Information | with rubber mounts |
| Weight | 8.405 kg |
| Material | Cast Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 38284 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| not for OE number | 7H8 407 151 B |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (38283)
- 1x Febi Mounting, control/trailing arm (28335)
- 1x Febi Mounting, control/trailing arm (26573)
£86.07
Important compatibility info
| Width | 31 mm |
| Outer diameter | 120 mm |
| Inner diameter | 11 mm |
| Number of Teeth | 40 |
| Additional Information 2 | with nut |
| Function | Gear/Sprocket, camshaft |
| Adjustable | Adjustable |
| Weight | 0.790 kg |
| Extra Description | febi Plus |
| Type | Gear/Sprocket, camshaft |
| Engine Management | Timing Belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.07
Important compatibility info
| Number of Connectors / Ports | 8 |
| Weight | 0.144 kg |
| Type | Relay, glow plug system |
| Function | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.08
Important compatibility info
| Weight | 2.630 kg |
| Width | 19 mm |
| Additional Information | with gaskets/seals, with fastening/mounting material |
| Number of Teeth | 99 |
| Surface | Coated |
| for OE number | 23356-42500 S5 |
| Type | Water Pump & Timing Belt Kit |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Width of castor bearing surface | 20 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (26114)
- 1x Febi Water Pump, engine cooling (173143)
£86.13
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 76 |
| Weight | 0.372 kg |
| Function | Chain Kit, oil pump drive |
| Type | Chain Kit, oil pump drive |
| Timing Chain Size | G53HR, G53HP |
| Wet Boiling Point | 55 °C |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (25229)
- 1x Febi Chain Tensioner, oil pump drive (25180)
£86.14
Important compatibility info
| Placement on Vehicle | Front |
| Bearing/Mounting Type | Hydro Mount |
| Function | Mounting, engine |
| Type | Mounting, engine |
| Weight | 1.21 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.16
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023