Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.16 kg |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.51
Important compatibility info
| Weight | 5.700 kg |
| Rod/Strut | Push Rod |
| Additional Information 2 | with crown nut |
| Length | 651 mm |
| Extra Description | ProKit |
| Cone Size | 30 mm |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on both sides |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.53
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.078 kg |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.53
Important compatibility info
| Weight | 1.299 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR, G53HP |
| Part number of the recommended special tools | ADK85501 |
| Replaces | 49622 |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (23778)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
- 1x Febi Pulley Bolt (47593)
- 1x Febi Oil Hose (49568)
£90.56
Important compatibility info
| Weight | 10.594 kg |
| Rotor Style | perforated/vented |
| Centering Diameter | 67 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Thickness | 64.5 mm |
| Brake Disc Thickness | 32 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 322 mm |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Surface | Coated |
| Minimum thickness | 30 mm |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.59
Important compatibility info
| Outer diameter | 258 mm. 240 mm |
| Thickness | 220 mm. 600 mm |
| Function | Bellow, air suspension |
| Weight | 7.3 kg |
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75, M22 x 1,5 |
| Additional Information | with piston |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.61
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 345 mm |
| Thickness | 66.3 mm |
| Brake Disc Thickness | 24 mm |
| Minimum thickness | 22.4 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 75 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Weight | 9.9 kg |
| Type | Brake Disc Rotor |
| for OE number | 34 20 6 797 607 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.62
Important compatibility info
| Function | Bellow, air suspension |
| Weight | 3.6 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 257 mm. 130 mm |
| Thickness | 475 mm |
| External Thread Size | M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.62
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.130 kg |
| Cable Length | 907 mm |
| Number of circuits | 6 |
| Lambda Sensor | Heated, Regulating Sensor |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.63
Important compatibility info
| Placement on Vehicle | Right, Charge Air Cooler |
| Material | FKM (fluorocarbon rubber), Silicone |
| Inner diameter 1 | 45 mm |
| Inner diameter 2 | 43 mm |
| Weight | 0.49 kg |
| Type | Charge Air Hose |
| Wall Thickness | 5.5 mm |
| Function | Charge Air Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.66
Important compatibility info
| Function | Mounting, manual transmission |
| Type | Mounting, manual transmission |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Weight | 2.167 kg |
| Placement on Vehicle | Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.70
Important compatibility info
| Replaces | 39475 |
| Function | Timing Chain Kit |
| Timing Chain Size | G68HRNG-1-70E |
| Number of Chain Links | 70 |
| Chain Type | Simplex, Closed chain |
| Placement on Vehicle | Lower |
| Weight | 0.650 kg |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (39474)
- 1x Febi Tensioner, timing chain (28717)
- 1x Febi Guide, timing chain (48770)
- 1x Febi Guide, timing chain (48773)
£90.70
Important compatibility info
| Weight | 1.0 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | KT210393, 98 009 431 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.70
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 51 mm |
| Brake Disc Thickness | 31.9 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 3 |
| Function | Brake Disc |
| Weight | 11.15 kg |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.71
Important compatibility info
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.16 kg |
| Placement on Vehicle | Rear |
| Function | Mounting, automatic transmission |
| Type | Mounting, automatic transmission |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.72
Important compatibility info
| Weight | 9.25 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 297.5 mm |
| Thickness | 98.5 mm |
| Inner diameter | 254.2 mm |
| Bolt Hole Circle Diameter | 130 mm |
| Centering Diameter | 79 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.76
Important compatibility info
| Weight | 1.530 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 5WA 199 262 BE |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.79
Important compatibility info
| Weight | 2.8 kg |
| Width | 143 mm |
| Outer diameter | 84 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.80
Important compatibility info
| Weight | 0.215 kg |
| Length | 110 mm |
| Width | 80 mm |
| Thickness | 41 mm |
| Number of Connectors / Ports | 5 |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Type | V-Ribbed Belt Set |
| Function | V-Ribbed Belt Set |
| Weight | 2.020 kg |
| Additional Information 2 | with tensioner element |
| Number of Ribs | 8 |
| Length | 880 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29037)
- 1x Febi Belt Tensioner, v-ribbed belt (22852)
£90.83
Important compatibility info
| Weight | 0.510 kg |
| Extra Description | febi Plus |
| Type | Valve, crankcase ventilation |
| Function | Valve, crankcase ventilation |
| for OE number | 11 61 7 533 400 S1 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (39653)
- 1x Febi Hose, crankcase ventilation (36730)
- 1x Febi Hose, crankcase ventilation (36031)
- 1x Febi Hose, crankcase ventilation (47227)
- 1x Febi Hose, crankcase ventilation (47228)
£90.83
Important compatibility info
| Voltage | 12 V |
| Number of Connectors / Ports | 3 |
| Pump Type | Dual Pump |
| Function | Washer Fluid Pump, window cleaning |
| Weight | 0.001 kg |
| Type | Washer Fluid Pump, window cleaning |
| Additional Information 2 | with seal ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.83
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.535 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£90.83
Important compatibility info
| Weight | 18.35 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 337 mm |
| Thickness | 100.5 mm |
| Brake Disc Thickness | 30 mm |
| Brake Disc Type | Solid |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 91.5 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Function | Brake Disc |
| Rim Hole Number | 10 -Hole |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.85
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 8.782 kg |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Min. Length | 768 mm |
| ABS Ring Diameter | 110 mm |
| Wheel Sided Joint Diameter | 99 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2 kW |
| Weight | 0.032 kg |
| for OE number | 28100-0B020 |
| Type | Starter |
| Output from | 2.0 kW |
| Output to | 2.2 kW |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Thread Size | M24x2,0 |
| Function | Drive Shaft |
| Additional Information 2 | with nut |
| Placement on Vehicle | Front Axle Right |
| Paired article numbers | 183311 |
| External Teeth, Wheel Side | 28 |
| Weight | 13.760 kg |
| External Teeth, Diff.Side | 41 |
| Min. Length | 1092 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Transmission-side joint diameter | 99 mm |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Inner length 1 | 868 mm |
| Weight | 1.108 kg |
| Outer length 1 | 1143 mm |
| Inner length 2 | 900 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 6.960 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36345 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| External Thread Size | M24 x 1,5 |
| Weight | 8.154 kg |
| Placement on Vehicle | Front Axle |
| Length | 855 mm |
| Rod/Strut | Push Rod |
| Thread Type | with right-hand thread |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Weight | 3.1 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 323 mm |
| Min. Length | 238 mm |
| Pipe Diameter | 85 mm. 38 mm |
| Mounting points diameter | 14 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Additional Information | with hose |
| Additional Information 2 | with clamps |
| Weight | 0.708 kg |
| Housing Colour | Black |
| Type | Repair Kit, oil separator (crankcase ventilation) |
| Housing material | Plastic |
| Function | Repair Kit, oil separator (crankcase ventilation) |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil Separator, crankcase ventilation (38773)
- 1x Febi Hose, crankcase ventilation (181755)
- 2x Febi Hose Clamp (48348)
£90.87
Important compatibility info
| Inner diameter | 125 mm |
| Number of Wings | 9 |
| Thickness | 117 mm |
| Outer diameter | 750 mm |
| Function | Fan Wheel, engine cooling |
| Type | Fan Wheel, engine cooling |
| Weight | 6.80 kg |
| for OE number | 51.06601.0275 S1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| External Thread Size | M10 |
| Wet Sump Material | Sheet Steel |
| Length | 550 mm |
| Height | 285 mm |
| Width | 205 mm |
| Colour | Black |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 3.50 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 0.401 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 0.497 kg |
| Additional Information | with gasket/seal, with temperature sensor |
| Opening Temperature | 105 °C |
| Housing Type | with housing |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 1.988 kg |
| Placement on Vehicle | Front Axle Left, Upper |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 47735 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with bolts/screws |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (32231)
- 2x Febi Mounting and Bolting Kit, control/trailing arm (29279)
£90.87
Important compatibility info
| Weight | 7.500 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Function | Centre Rod Assembly |
| Thread Type | with right-hand thread |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Length | 744 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Colour | Black |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Weight | 2.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 2.03 kg |
| Placement on Vehicle | Rear Axle |
| Width | 39 mm |
| Outer diameter | 203 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Piston Diameter | 20.6 mm |
| Type | Brake Shoe Set |
| Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 2.400 kg |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 6.3 kg |
| Rod/Strut | Push Rod |
| Length | 895.5 mm |
| Function | Centre Rod Assembly |
| Cone Size | 22 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| External Thread Size | M18 x 1,5 |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Outer diameter | 54 mm |
| Additional Information | with kingpin |
| Length | 222.5 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Weight | 5.1 kg |
| Paired article numbers | 15897 |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Bush, steering knuckle (15889)
- 1x Febi Washer (15887)
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M28 x 1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 9.422 kg |
| External Teeth, Diff.Side | 30 |
| Min. Length | 630 mm |
| Wheel Sided Joint Diameter | 108.6 mm |
| Transmission-side joint diameter | 95 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 7.329 kg |
| Number of mounting bores | 6 |
| Min. Length | 806 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 0.863 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 160 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| for OE number | 24321-03000 S1 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please compare the hole spacing of the fixed guide rail.This kit is equipped with a fixed guide rail having a hole spacing of 125mm.For 134mm hole spacing use guide rail OE 24431-03010 instead.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (176113)
- 1x Febi Tensioner, timing chain (108339)
- 1x Febi Guide, timing chain (108342)
- 1x Febi Guide, timing chain (176308)
- 1x Febi Guide, timing chain (176309)
- 1x Febi Guide, timing chain (176310)
£90.87
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Min. Length | 188 mm |
| Pipe Diameter | 94 mm. 51 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Weight | 4.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Thermostat, coolant |
| Opening Temperature | 97 °C. 102 °C |
| Number of Connectors / Ports | 2 |
| Material | Plastic |
| Weight | 0.400 kg |
| Type | Thermostat, coolant |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rod/Strut | Push Rod |
| Weight | 5.81 kg |
| Cone Size | 32 mm |
| Pipe Diameter | 36 mm |
| Function | Centre Rod Assembly |
| Length | 733 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT, M30 x 1,5 LHT |
| External Thread Size | M27 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Width of castor bearing surface | 38 mm |
| Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Units / Pulleys | incl. deflection pulley |
| Function | V-Ribbed Belt Set |
| Length | 1512 mm |
| Number of Ribs | 10 |
| Weight | 3.0 kg |
| Type | V-Ribbed Belt Set |
| Additional Information | with belt tensioner for V-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (35534)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (30646)
- 1x Febi V-Ribbed Belt (40706)
£90.87
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023