Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 1.422 kg |
| for OE number | 03C 115 105 N SK |
| Type | Oil Pump |
| Function | Oil Pump |
| Additional Information 2 | without gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 0.48 kg |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with cable, with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 3.204 kg |
| Placement on Vehicle | transmission sided |
| Additional Information 2 | with bolts/screws |
| Function | Release Fork, clutch |
| Extra Description | febi Plus |
| Type | Release Fork, clutch |
| Additional Information | with cross pin, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Release Fork, clutch (22752)
- 1x Febi Bolt, release fork (22759)
- 2x Febi Circlip (35973)
- 2x Febi Screw, clutch release bearing shaft (35974)
- 2x Febi Cover, clutch release bearing shaft (35983)
£86.91
Important compatibility info
| Weight | 3.180 kg |
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Additional Information | with oil drain plug |
| Additional Information 2 | with oil sump gasket |
| for OE number | 06 52 133 S1 |
| Seal Material | NBR (nitrile butadiene rubber) |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Oil sump (29469)
- 1x Febi Gasket, oil sump (04610)
£86.91
Important compatibility info
| Extra Description | ProKit |
| Weight | 9.000 kg |
| Placement on Vehicle | Front Axle |
| Length | 848 mm |
| Outer diameter | 52 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Type | Centre Rod Assembly |
| Replaces | 18206 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 29 |
| Weight | 9.774 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 615 mm |
| Wheel Sided Joint Diameter | 120 mm |
| Transmission-side joint diameter | 96 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 170964 |
| Cone Size | 24 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with lock nut |
| Weight | 5.18 kg |
| External Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without bearing, with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 0.524 kg |
| Material | FPM (fluoride rubber), MVQ (silicone rubber) |
| Inner diameter | 90 mm |
| Colour | Red |
| Function | Charge Air Hose |
| Additional Information 2 | with clamps |
| Extra Description | ProKit |
| Type | Charge Air Hose |
| Wall Thickness | 4 mm |
| Hose Length | 160 mm |
| Outer diameter | 98 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Charge Air Hose (30183)
- 2x Febi Fastening Clamp, charge air hose (39027)
£86.91
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 5.110 kg |
| Placement on Vehicle | Front Axle |
| Width | 49 mm |
| Outer diameter | 100 mm |
| Inner diameter | 32 mm |
| Bearing Type | Angular Ball Bearing |
| Type | Wheel Bearing Kit |
| Function | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Weight | 0.774 kg |
| Function | Steering Column Switch |
| Combi Switch Function | with indicator function |
| Number of Connectors / Ports | 10 |
| Type | Steering Column Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Transmission-side joint diameter | 85.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 105 mm |
| Min. Length | 638 mm |
| External Teeth, Diff.Side | 37 |
| Placement on Vehicle | Front Axle Left |
| Weight | 7.692 kg |
| External Teeth, Wheel Side | 38 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Fill quantity | 12 l |
| Additional Information | with lids |
| Weight | 3.710 kg |
| Length | 471 mm |
| Width | 264 mm |
| Material | PP (Polypropylene) |
| Thickness | 440 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.91
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Width | 60 mm |
| Outer diameter | 255 mm |
| Inspection Tag | ECE R90 Approved |
| Mounting Type | Pre-assembled |
| Function | Brake Shoe Set |
| Weight | 1.72 kg |
| Piston Diameter | 19.1 mm |
| Type | Brake Shoe Set |
| Additional Information | with wheel brake cylinder, with accessories, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.92
Important compatibility info
| Bore Diameter | 14 mm |
| Weight | 6.407 kg |
| Mounting bores distance | 75 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Pipe Diameter | 58 mm |
| Min. Length | 401 mm |
| External Thread Size | M14 x 1,5 |
| Function | Shock Absorber |
| Max. Length | 607 mm |
| Shock Absorber Type | Gas Pressure |
| Placement on Vehicle | Front Axle Right, Front Axle Left |
| Shock Absorber Design | Suspension Strut |
| Piston conrod diameter | 25 mm |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.97
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Upper Right |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, engine |
| Weight | 2.028 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.97
Important compatibility info
| Weight | 2.010 kg |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | Left |
| Bearing/Mounting Type | electrically adjustable hydro mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£86.99
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 12.04 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 340 mm |
| Thickness | 55.4 mm |
| Brake Disc Thickness | 32.2 mm |
| Minimum thickness | 28.5 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.01
Important compatibility info
| Voltage | 12 V |
| Rated Power | 2 kW |
| Number of Teeth | 11 |
| Function | Starter |
| Type | Starter |
| Weight | 5.3 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.05
Important compatibility info
| Weight | 0.767 kg |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 194 |
| Function | Timing Belt Kit |
| Type | Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (47728)
- 1x Febi Tensioner Pulley, timing belt (10298)
- 1x Febi Deflection Pulley/Guide Pulley, timing belt (23654)
- 1x Febi Mounting Set, tension/deflection pulley (timing belt) (178793)
£87.09
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 107125 |
| Cable Length | 500 mm. 1200 mm |
| Number of circuits | 31 |
| Type | Cable Repair Kit, tailgate |
| Function | Cable Repair Kit, tailgate |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£87.14
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023