Proud to be a UK-based company
Contact us
Important compatibility info
| Additional Information 2 | with nut |
| Thread Size | M22x,15 |
| External Teeth, Wheel Side | 26 |
| Weight | 6.142 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 896 mm |
| Wheel Sided Joint Diameter | 79.4 mm |
| Transmission-side joint diameter | 75.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.54
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Bore Diameter | 12 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.500 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Mounting bores distance | 456 mm |
| Max. Length | 456 mm |
| Min. Length | 298 mm |
| Pipe Diameter | 63 mm. 54 mm |
| Piston conrod diameter | 18 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| Operating Mode | Electronic |
| Weight | 0.55 kg |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
| for OE number | 970 300 03 04 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| Weight | 2.2 kg |
| Length | 228 mm |
| Width | 45 mm |
| Outer diameter | 171 mm |
| Inner diameter | 100 mm |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Additional Information 2 | with rolling bearing |
| Hole Spacing | 194 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.57
Important compatibility info
| External Thread Size | M16 x 1,5, M16 x 2 |
| Function | Bellow, air suspension |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Length | 260 mm |
| Additional Information | with piston |
| Outer diameter | 228 mm. 170 mm |
| Thickness | 137 mm |
| Weight | 5.94 kg |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.58
Important compatibility info
| Weight | 1.0 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
| for turbocharger (art. no.) | 186662 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.59
Important compatibility info
| for OE number | 89465-48110 |
| Spanner Size | 22 |
| Weight | 0.123 kg |
| Cable Length | 800 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.60
Important compatibility info
| Weight | 1.148 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 1 152 021 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.61
Important compatibility info
| Rotor Style | Internally Vented |
| Function | Brake Disc |
| Surface | Coated |
| Bolt Hole Circle Diameter | 112 mm |
| Minimum thickness | 24 mm |
| Brake Disc Thickness | 26 mm |
| Thickness | 59.3 mm |
| Outer diameter | 330 mm |
| Placement on Vehicle | Rear Axle |
| Rim Hole Number | 5 -Hole |
| Weight | 9.683 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.64
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 258 mm |
| Thickness | 144 mm |
| Weight | 11.5 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| External Thread Size | M12 x 1,75, M20 x 1,5, M12 x 1,5, M16 x 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.66
Important compatibility info
| Weight | 1.64 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 410 mm |
| Min. Length | 272 mm |
| Pipe Diameter | 57 mm. 45 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.68
Important compatibility info
| Weight | 0.177 kg |
| Number of Connectors / Ports | 3 |
| Cable Length | 115 mm |
| Type | Level switch, condensation water level |
| Function | Level switch, condensation water level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.69
Important compatibility info
| Spanner Size | 22 |
| Weight | 0.155 kg |
| Cable Length | 1760 mm |
| Number of circuits | 4 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Function | Oxygen Sensor |
| External Thread Size | M18 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.75
Important compatibility info
| Weight | 3.28 kg |
| Placement on Vehicle | Front Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 690 mm |
| Min. Length | 410 mm |
| Pipe Diameter | 70 mm. 61 mm |
| Mounting points diameter | 45 mm |
| Piston conrod diameter | 17 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.76
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 325 mm |
| Thickness | 49.5 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 120.6 mm |
| Centering Diameter | 73 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 5 -Hole |
| Weight | 9.98 kg |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.77
Important compatibility info
| Width | 35 mm |
| Outer diameter | 180 mm |
| Inner diameter | 35 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Weight | 2.535 kg |
| Extra Description | ProKit |
| Type | Belt Pulley, crankshaft |
Additional Information
Technical Information
Attention!: The old bolt has to be replaced with the enclosed bolt. Tightening torque specification of the vehicle manufacturer have to be obeyed.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (27215)
- 1x Febi Centering Bolt, crankshaft pulley (33619)
£88.78
Important compatibility info
| Additional Information | with lock nut |
| Paired article numbers | 175624 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower, Front |
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 1.699 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| External Thread Size | M14 x 1,5 |
| Additional Information 2 | with ball joint, with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.81
Important compatibility info
| Type | Timing Chain Kit |
| Number of Chain Links | 94 |
| Chain Type | Simplex, Closed chain |
| Function | Timing Chain Kit |
| Weight | 0.617 kg |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (44294)
- 1x Febi Tensioner, timing chain (178328)
- 1x Febi Guide, timing chain (177314)
- 1x Febi Guide, timing chain (179206)
£88.85
Important compatibility info
| for OE number | 02M 911 023 X |
| Number of Teeth | 10 |
| Function | Starter |
| Voltage | 12 V |
| Rated Power | 1.1 kW |
| Weight | 3.57 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 11 |
| Rated Power | 1.2 kW |
| Weight | 4.8 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£88.85
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023