Proud to be a UK-based company
Contact us
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Weight | 7.485 kg |
| Placement on Vehicle | Front Axle |
| Length | 946 mm |
| Width | 42 mm |
| Outer diameter | 42 mm |
| Cone Size | 26 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Thickness | 83 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| for OE number | 7H0 422 154 F |
| Weight | 1.422 kg |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Inner diameter | 16 mm |
| Operating Mode | Hydraulic |
| Number of mounting bores | 3 |
| Mounting points diameter | 8 mm |
| Type | Hydraulic Pump, steering |
| Operating pressure to | 120 bar |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 0.55 kg |
| Outer diameter | 38 mm |
| Operating Mode | Electronic |
| Opening Temperature | 105 °C |
| Type | Thermostat, coolant |
| Function | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Weight | 9.510 kg |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Fan Wheel, engine cooling |
| Weight | 5.10 kg |
| Outer diameter | 700 mm |
| Thickness | 90 mm |
| Bolt Hole Circle Diameter | 155 mm |
| Number of Wings | 8 |
| for OE number | 906 205 04 06 |
| Type | Fan Wheel, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 38844 |
| Steering arm type | Control Arm |
| Outer diameter | 22 mm |
| Placement on Vehicle | Front Axle Left, Lower |
| Weight | 7.11 kg |
| Material | Sheet Steel |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information 2 | with nut |
| Thread Size | M28x1,5 |
| External Teeth, Wheel Side | 28 |
| Weight | 8.782 kg |
| External Teeth, Diff.Side | 37 |
| Number of Teeth, ABS ring | 54 |
| Min. Length | 768 mm |
| ABS Ring Diameter | 110 mm |
| Wheel Sided Joint Diameter | 99 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 7.329 kg |
| Number of mounting bores | 6 |
| Min. Length | 806 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Surface | Coated |
| Weight | 14.7 kg |
| Outer diameter | 312 mm |
| Thickness | 116 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 118 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Weight | 2.28 kg |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Weight | 2.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Placement on Vehicle | Front Axle |
| Length | 837 mm |
| Rod/Strut | Push Rod |
| Weight | 6.4 kg |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 6.960 kg |
| Placement on Vehicle | Front Axle Right, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36345 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with lock nut, with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle |
| Additional Information | with Split Pin |
| Additional Information 2 | with nut |
| Thread Size | M28 x 1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 9.422 kg |
| External Teeth, Diff.Side | 30 |
| Min. Length | 630 mm |
| Wheel Sided Joint Diameter | 108.6 mm |
| Transmission-side joint diameter | 95 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Weight | 2.400 kg |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Number of Connectors / Ports | 2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Length | 226 mm |
| Outer diameter 1 | 40 mm |
| Outer diameter 2 | 60 mm |
| Function | Repair Kit, kingpin |
| Weight | 4.48 kg |
| External Thread Size | M40 x 1,5 |
| Additional Information | with Thrust Bearing |
| Extra Description | ProKit |
| Type | Repair Kit, kingpin |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Bush, kingpin (29495)
- 1x Febi Castle Nut (29497)
- 1x Febi Kingpin (29486)
- 1x Febi Repair Kit, kingpin (29768)
- 1x Febi Bush, steering knuckle (35642)
£90.87
Important compatibility info
| Weight | 0.401 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 134 |
| Function | Timing Chain |
| Type | Timing Chain |
| Additional Information 2 | Requires special tools for mounting |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Placement on Vehicle | Front Axle Left |
| Weight | 6.596 kg |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Number of Teeth | 26 |
| Weight | 0.749 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
Important compatibility info
| Weight | 6.960 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 36346 |
| Additional Information | with rubber mounts, with lock nut |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.87
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023