Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Wings | 12 |
| Seal Material | Rubber |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Weight | 10.1 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.56
Important compatibility info
| Function | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Placement on Vehicle | Rear Axle Right |
| Additional Information | with electric motor |
| Material | Cast Iron |
| Vehicle Equipment | for vehicles with electric parking brake |
| Weight | 3.0 kg |
| Paired article numbers | 183210 |
| Brake caliper piston diameter | 41 mm |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.60
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 2.524 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.66
Important compatibility info
| Weight | 8.7 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 568 mm |
| Steering arm type | Trailing Arm |
| Paired article numbers | 39693 |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.67
Important compatibility info
| Weight | 1.4 kg |
| Driver Position | for right-hand drive vehicles |
| Function | Interior Blower |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Weight | 2.81 kg |
| Length | 157 mm |
| Thickness | 95 mm |
| Number of Holes | 5 |
| Bolt Hole Circle Diameter | 130 mm |
| Function | Wheel Hub |
| Type | Wheel Hub |
| Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.69
Important compatibility info
| Internal Thread Size | M14 x 2 |
| Weight | 23.4 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 375 mm |
| Brake Disc Thickness | 45 mm |
| Brake Disc Type | Internally Vented |
| Number of Holes | 10 |
| Minimum thickness | 38 mm |
| Bolt Hole Circle Diameter | 144 mm |
| Surface | Coated |
| Type | Brake Disc |
| Function | Brake Disc |
| Additional Information 2 | without ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Paired article numbers | 183908 |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with axle nut |
| External Teeth, Wheel Side | 28 |
| Weight | 6.930 kg |
| External Teeth, Diff.Side | 28 |
| Max. Length | 617 mm |
| Min. Length | 567 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
| External Thread Size | M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Function | Starter |
| Number of Teeth | 11 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
| Weight | 3.62 kg |
| Type | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.9 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 352 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 1.537 kg |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Type | Cylinder Head Cover |
| Weight | 1.477 kg |
| Placement on Vehicle | Right |
| Additional Information | with gasket/seal |
| Material | Plastic |
| Paired article numbers | 176910 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Additional Information 2 | with dryer, with integrated oil separator |
| Voltage | 24 V |
| Rated Power | 100 W |
| Weight | 3.5 kg |
| Cut-off Pressure | 12 bar |
| Function | Air Dryer, compressed-air system |
| Type | Air Dryer, compressed-air system |
| Control Range | 0,9+0,7 bar |
| Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Inner length 1 | 650 mm |
| Inner length 2 | 675 mm |
| Weight | 0.940 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 1 | 997 mm |
| Outer length 2 | 927 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Operating Mode | Mechanical |
| Min. Length | 283 mm |
| Pipe Diameter | 50 mm |
| Type | Shock Absorber, driver cab suspension |
| Mounting points diameter | 50 mm. 20 mm |
| Max. Length | 298 mm |
| Placement on Vehicle | Right Front |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber, driver cab suspension |
| Weight | 1.5 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 0.200 kg |
| Internal Thread Size | M14 x 1,5 |
| Length | 160 mm |
| Width | 47 mm. 65 mm |
| Colour | Black |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 4 |
| Function | Gear Lever Knob |
| Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| for OE number | 2 853 196 |
| Cone Size | 30 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| Length | 1743 mm |
| Placement on Vehicle | Front Axle |
| Weight | 16.0 kg |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Paired article numbers | 178322 |
| Weight | 0.953 kg |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Right |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 0.55 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Additional Information 2 | with crown nut |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 50 mm |
| Cone Size | 26 mm |
| Thickness | 103 mm |
| Outer diameter | 50 mm |
| Placement on Vehicle | Front Axle |
| Width | 50 mm |
| Weight | 13.0 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Length | 1650 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Steering arm type | Control Arm |
| Paired article numbers | 181132 |
| Weight | 6.431 kg |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size | 28 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 2.02 kg |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Width | 150 mm |
| Outer diameter | 150 mm |
| Thickness | 89 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Bearing Type | Tapered Roller Bearing |
| Function | Wheel Bearing Kit |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.74
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.6 kg |
| Placement on Vehicle | Right |
| for OE number | 3Q0 199 262 M |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.74
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Parameter | Typ 24/24 |
| Weight | 8.6 kg |
| Brake Type | Drum Brake |
| Placement on Vehicle | Rear |
| Function | Diaphragm Brake Cylinder |
| Piston Rod Length | 187 mm |
| Distance of fastening bolts | 120 mm |
| Type | Diaphragm Brake Cylinder |
| Stroke | 57 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.77
Important compatibility info
| for OE number | 960 300 00 04 |
| Operating Mode | Electronic |
| Weight | 0.445 kg |
| Type | Accelerator Pedal |
| Function | Accelerator Pedal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.77
Important compatibility info
| Bore Diameter | 16 mm |
| Fill Medium | Brake Fluid |
| Function | Master Cylinder, clutch |
| Weight | 0.370 kg |
| Type | Master Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.93
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 43010 |
| Weight | 0.832 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.98
Important compatibility info
| Weight | 0.708 kg |
| Type | Repair Kit, gear shift lever |
| Function | Repair Kit, gear shift lever |
| External Thread Size | M10 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.98
Important compatibility info
| Weight | 0.491 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.00
Important compatibility info
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Max. Length | 508 mm |
| Min. Length | 311 mm |
| Pipe Diameter | 73 mm. 63.5 mm |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Type | Shock Absorber |
| Weight | 4.75 kg |
| Shock Absorber Design | Telescopic Shock Absorber |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.00
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
| Rod/Strut | Guide Rod |
| Weight | 8.5 kg |
| Placement on Vehicle | Rear Axle, Upper, Centre |
| Length | 522 mm |
| Outer diameter | 46 mm |
| Inner diameter | 19 mm |
| Steering arm type | Trailing Arm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.04
Important compatibility info
| Hole Spacing | 100 mm |
| Weight | 8.9 kg |
| Placement on Vehicle | Front Axle |
| Length | 660 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.11
Important compatibility info
| Housing Type | without housing |
| Weight | 0.05 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.12
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Extra Description | febi Plus |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.594 kg |
| Outer diameter | 75 mm |
| Operating Mode | Electric |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Cap (174341)
- 1x Febi Plug (173377)
£100.13
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.870 kg |
| Placement on Vehicle | Right |
| for OE number | 11 21 063 87R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.15
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 181902 |
| External Teeth, Wheel Side | 29 |
| Weight | 10.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1016 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 91.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.15
Important compatibility info
| Weight | 1.6 kg |
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 155 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.21
Important compatibility info
| Weight | 1.719 kg |
| Inner diameter | 19 mm |
| Outer diameter | 135 mm |
| Width | 135 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.24
Important compatibility info
| Weight | 2.690 kg |
| Thickness | 50 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 8 |
| Outer diameter 1 | 145 mm |
| Outer diameter 2 | 167 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK + 4PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.25
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 8.388 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 715 mm |
| Wheel Sided Joint Diameter | 89.8 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Weight | 7.62 kg |
| Rim Hole Number | 4 -Hole |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 45.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.29
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Weight | 3.0 kg |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.30
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 11.05 kg |
| Placement on Vehicle | Front Axle |
| Length | 652 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.31
Important compatibility info
| Min. Length | 569 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 107.8 mm |
| Number of mounting bores | 6 |
| Weight | 7.062 kg |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 44.7 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 10.28 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.38
Important compatibility info
| Weight | 1.7 kg |
| Colour | Black |
| Function | Cylinder Head Cover |
| Material | PA (polyamide), ACM (Polyacrylate) |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Replaces | 102208 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.39
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Spring-loaded Cylinder |
| Parameter | Typ 16 / 24 |
| Additional Information | with fastening/mounting material |
| Weight | 8.0 kg |
| Brake Type | Disc Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.41
Important compatibility info
| Weight | 4.720 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05022 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.41
Important compatibility info
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 183229 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.48
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.160 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.48
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023