Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 0.70 kg |
| Placement on Vehicle | Lower |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 66 |
| Timing Chain Size | G67AM, G67HP, G67HR |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29858)
- 1x Febi Tensioner, timing chain (21291)
- 1x Febi Guide, timing chain (24952)
- 1x Febi Guide, timing chain (24898)
£92.84
Important compatibility info
| Length | 1008 mm |
| Outer diameter | 52 mm |
| Cone Size | 30 mm |
| Pipe Diameter | 52 mm |
| Function | Centre Rod Assembly |
| Rod/Strut | Push Rod |
| Weight | 10.500 kg |
| External Thread Size | M24 x 1,5, M30 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 6.8 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Paired article numbers | 40426 |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber mounts, with lock nut |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.07 kg |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| Placement on Vehicle | before soot particulate filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Weight | 7.3 kg |
| Placement on Vehicle | Rear Axle |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Window Regulator |
| Placement on Vehicle | Left Front |
| Operating Mode | Electric |
| Paired article numbers | 27346 |
| Weight | 1.7 kg |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.220 kg |
| Length | 110 mm |
| Width | 89 mm |
| Thickness | 49 mm |
| Function | Relay, glow plug system |
| Type | Relay, glow plug system |
| Replaces | 34453 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 2.951 kg |
| Width | 29 mm. 40 mm |
| Outer diameter | 166 mm. 152 mm |
| Inner diameter | 31 mm. 57 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Additional Information 2 | with screw |
| Type | Belt Pulley, crankshaft |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Pulley, crankshaft (31483)
- 1x Febi Pulley Bolt (33697)
£92.85
Important compatibility info
| Number of Teeth | 26 |
| Weight | 0.749 kg |
| Type | Camshaft Adjuster |
| Function | Camshaft Adjuster |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Thread Size | M20x1,5 |
| External Teeth, Diff.Side | 27 |
| Min. Length | 614 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 89.1 mm |
| Transmission-side joint diameter | 81.6 mm |
| Placement on Vehicle | Front Axle Left |
| Weight | 6.596 kg |
| Additional Information 2 | with nut |
| External Teeth, Wheel Side | 25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Centre Rod Assembly |
| Rod/Strut | Guide Rod |
| Thread Type | with right-hand thread |
| Weight | 7.485 kg |
| Placement on Vehicle | Front Axle |
| Length | 946 mm |
| Width | 42 mm |
| Outer diameter | 42 mm |
| Cone Size | 26 mm |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M20 x 1,5 |
| Thickness | 83 mm |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 41 mm |
| Outer diameter | 90 mm |
| Inner diameter | 45 mm |
| Outer diameter 2 | 87 mm |
| Function | Wheel Bearing Kit |
| Additional Information 2 | with integrated magnetic sensor ring |
| Bearing Type | Angular Ball Bearing |
| Weight | 1.4 kg |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Rim Hole Number | 6 -Hole |
| Surface | Coated |
| Weight | 14.7 kg |
| Outer diameter | 312 mm |
| Thickness | 116 mm |
| Brake Disc Thickness | 34 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Centering Diameter | 118 mm |
| Function | Brake Disc |
| Placement on Vehicle | Rear Axle |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 9.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 905 mm |
| Width | 52 mm |
| Outer diameter | 42 mm |
| Thickness | 116 mm |
| Rod/Strut | Guide Rod |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 RHT |
| Type | Centre Rod Assembly |
| Additional Information 2 | with self-locking nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Number of Connectors / Ports | 12. 4. 14 |
| Weight | 0.12 kg |
| Type | Clock Spring, airbag |
| Function | Clock Spring, airbag |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Suspension, propshaft |
| Weight | 0.325 kg |
| Type | Suspension, propshaft |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Clutch Release Bearing |
| Weight | 2.851 kg |
| Type | Clutch Release Bearing |
| Additional Information 2 | with mounting kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.460 kg |
| Material | FPM (fluoride rubber), MVQ (silicone rubber) |
| Outer diameter | 98 mm |
| Inner diameter | 90 mm |
| Colour | Red |
| Function | Charge Air Hose |
| Type | Charge Air Hose |
| Hose Length | 282 mm |
| Wall Thickness | 4 mm |
| for OE number | 81.96301.0900 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 7.900 kg |
| Rod/Strut | Guide Rod |
| Length | 974 mm |
| Material | Steel |
| Extra Description | ProKit |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Pipe Diameter | 40 mm |
| Cone Size | 30 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| External Thread Size | M24 x 1,5 |
| Internal Thread Size | M30 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.310 kg |
| Number of Connectors / Ports | 4 |
| Function | Ignition Coil |
| Type | Ignition Coil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.280 kg |
| Length | 205 mm |
| Width | 145 mm |
| Thickness | 68 mm |
| Type | Oil Separator, crankcase ventilation |
| Function | Oil Separator, crankcase ventilation |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Wheel Sided Joint Diameter | 91.2 mm |
| Type | Drive Shaft |
| Additional Information | with Split Pin |
| Weight | 9.510 kg |
| Function | Drive Shaft |
| Transmission-side joint diameter | 88.8 mm |
| External Teeth, Wheel Side | 25 |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Right |
| Min. Length | 921 mm |
| External Teeth, Diff.Side | 37 |
| Additional Information 2 | with nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Multi-circuit Protection Valve |
| Type | Multi-circuit Protection Valve |
| Weight | 0.730 kg |
| Internal Thread Size | M16 x 1,5, M22 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.42 kg |
| Outer diameter | 32 mm |
| Opening Temperature | 80 °C. 89 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Additional Information 2 | with Temperature Switch |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Number of Doors | 4 |
| Weight | 1.70 kg |
| Placement on Vehicle | Right Front |
| Operating Mode | Electric |
| Paired article numbers | 27345 |
| Function | Window Regulator |
| Type | Window Regulator |
| Additional Information | without electric motor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.431 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (176599)
- 1x Febi Water Pump, engine cooling (22206)
£92.85
Important compatibility info
| Additional Information 2 | with crown nut |
| Weight | 5.8 kg |
| Placement on Vehicle | Front Axle |
| Length | 661 mm |
| Pipe Diameter | 36 mm |
| Function | Tie Rod |
| Type | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Weight | 0.23 kg |
| Outer diameter | 25 mm |
| Number of Connectors / Ports | 2 |
| Opening Temperature | 105 °C |
| Function | Thermostat, coolant |
| Type | Thermostat, coolant |
| Additional Information | with gasket/seal |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Extra Description | ProKit |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 40387 |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint, with rubber mount |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Weight | 5.101 kg |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (30199)
- 1x Febi Bolt, control arm (40259)
- 2x Febi Washer (37906)
- 2x Febi Nut, ball joint (23696)
- 1x Febi Bolt, control arm (40261)
£92.85
Important compatibility info
| Weight | 0.072 kg |
| Placement on Vehicle | after soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Type | Sensor, exhaust gas temperature |
| for OE number | 070 906 088 AF |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Function | Hydraulic Pump, steering |
| Height | 120 mm |
| Width | 126 mm |
| Length | 128 mm |
| Weight | 2.28 kg |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 52 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Length | 170 mm |
| Height | 80 mm |
| Width | 180 mm |
| Inspection Tag | ADR |
| Number of Connectors / Ports | 14 |
| Weight | 0.59 kg |
| Protection Type (IP Code) | IP54 |
| Type | Cable Junction Box |
| Function | Cable Junction Box |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Rod/Strut | Coupling Rod |
| Bore Diameter | 22 mm |
| Weight | 5.185 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Material | Steel |
| Diameter | 50 mm |
| Length | 400 mm |
| Placement on Vehicle | Rear Axle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.85
Important compatibility info
| Material | Cast Aluminium |
| Number of grooves | 7 |
| Number of Wings | 8 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber/Metal |
| Weight | 2.609 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.86
Important compatibility info
| Type | Bushing, axle beam |
| Function | Bushing, axle beam |
| Placement on Vehicle | Left, Right |
| Weight | 0.622 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.87
Important compatibility info
| Weight | 0.177 kg |
| Number of Connectors / Ports | 3 |
| Cable Length | 115 mm |
| Type | Level switch, condensation water level |
| Function | Level switch, condensation water level |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.88
Important compatibility info
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Rim Hole Number | 5 -Hole |
| Outer diameter | 330 mm |
| Weight | 10.4 kg |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Thickness | 45.1 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 110 mm |
| Placement on Vehicle | Front Axle |
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.88
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.8 kW |
| Weight | 4.3 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.89
Important compatibility info
| Steering arm type | Control Arm |
| Paired article numbers | 48096 |
| Placement on Vehicle | Front Axle Left, Upper |
| Weight | 0.96 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts, with lock nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.91
Important compatibility info
| Replaces | 103919 |
| Weight | 1.200 kg |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Left |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.92
Important compatibility info
| Weight | 2.384 kg |
| Additional Information | with gasket/seal |
| Material | Grey Cast Iron |
| Number of Wings | 7 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Plastic |
| Seal Material | Rubber |
| Additional Information 2 | switchable water pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.92
Important compatibility info
| Thickness | 44 mm |
| Parameter | VL120R |
| Function | Clutch, radiator fan |
| Outer diameter | 160 mm |
| Weight | 0.863 kg |
| Type | Clutch, radiator fan |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.98
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Sensor, crankshaft pulse |
| Weight | 0.040 kg |
| Type | Sensor, crankshaft pulse |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£92.99
Important compatibility info
| Weight | 0.084 kg |
| Type | Shift Valve, automatic transmission |
| Function | Shift Valve, automatic transmission |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.00
Important compatibility info
| Additional Information 2 | with quick couplers |
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 0.971 kg |
| Cooling Hose | from coolant regulator housing to engine cooler |
| Type | Radiator Hose |
| Function | Radiator Hose |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.02
Important compatibility info
| Weight | 12.8 kg |
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 629 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Guide Rod |
| Pipe Diameter | 50 mm |
| Mounting points diameter | 19 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.03
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.7 kW |
| Weight | 3.53 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.04
Important compatibility info
| Type | Condenser, air conditioning |
| Core Length | 441 mm |
| Weight | 2.503 kg |
| Core Depth | 16 mm |
| Function | Condenser, air conditioning |
| Core Width | 560 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.06
Important compatibility info
| Weight | 5.0601 kg |
| Internal Thread Size | M16 x 1,5, M18 x 1,5 |
| Placement on Vehicle | both sides |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 960 241 77 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.09
Important compatibility info
| Min. Length | 255 mm |
| Piston conrod diameter | 28 mm |
| Max. Length | 437 mm |
| Bore Diameter | 15 mm |
| Pipe Diameter | 58 mm |
| Shock Absorber Mounting Type | Top pin, Bottom Clamp |
| Mounting bores distance | 90 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Shock Absorber System | Twin-Tube |
| Function | Shock Absorber |
| Shock Absorber Design | Suspension Strut |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Weight | 4.907 kg |
| Shock Absorber Type | Gas Pressure |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.11
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023