Proud to be a UK-based company
Contact us
Important compatibility info
| Outer diameter | 54 mm |
| Additional Information | with kingpin |
| Length | 222.5 mm |
| Function | Repair Kit, kingpin |
| Type | Repair Kit, kingpin |
| Weight | 5.1 kg |
| Paired article numbers | 15897 |
| Additional Information 2 | with bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (15864)
- 4x Febi Bush, steering knuckle (15858)
- 1x Febi Seal Ring, steering knuckle (15886)
- 1x Febi Bush, steering knuckle (15889)
- 1x Febi Washer (15887)
£89.88
Important compatibility info
| External Thread Size | M10 |
| Wet Sump Material | Sheet Steel |
| Length | 550 mm |
| Height | 285 mm |
| Width | 205 mm |
| Colour | Black |
| Type | Oil sump |
| Function | Oil sump |
| Weight | 3.50 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| Spanner Size | 22 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 4.5 kg |
| Placement on Vehicle | Rear Axle |
| Width | 47 mm |
| Outer diameter | 180 mm |
| Inner diameter | 110 mm |
| Bearing Type | Tapered Roller Bearing |
| Type | Wheel Bearing |
| Function | Wheel Bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M16x1,5 |
| Bore Diameter | 8.5 mm |
| External Teeth, Wheel Side | 36 |
| Weight | 7.329 kg |
| Number of mounting bores | 6 |
| Min. Length | 806 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 100 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Inner length 1 | 868 mm |
| Weight | 1.108 kg |
| Outer length 1 | 1143 mm |
| Inner length 2 | 900 mm |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Outer length 2 | 1122 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Weight | 5.855 kg |
| Placement on Vehicle | Front Axle |
| Length | 882 mm |
| Outer diameter | 40 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M20 x 1,5, M24 x 1,5 |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Internal Thread Size | M30 x 1,5 RHT |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Right |
| Additional Information | with rubber mounts |
| Additional Information 2 | with ball joint |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 18 mm |
| Weight | 2.762 kg |
| Paired article numbers | 181408 |
| Steering arm type | Control Arm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 8 |
| Rated Power | 0.9 kW |
| Weight | 2.9 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Width | 487 mm |
| Fill quantity | 11 l |
| Weight | 2.965 kg |
| Material | PP (Polypropylene) |
| Thickness | 325 mm |
| Width 1 | 233 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 397 mm |
| Min. Length | 188 mm |
| Pipe Diameter | 94 mm. 51 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber, driver cab suspension |
| Type | Shock Absorber, driver cab suspension |
| Weight | 4.8 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.88
Important compatibility info
| Function | Oil Pump |
| Type | Oil Pump |
| Weight | 1.214 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.95
Important compatibility info
| Refrigerant | R 134a |
| Type | Condenser, air conditioning |
| Core Length | 451 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Weight | 2.421 kg |
| Additional Information 2 | with dryer |
| Core Width | 560 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.97
Important compatibility info
| Weight | 11.1 kg |
| Surface | Coated |
| Centering Diameter | 68 mm |
| Bolt Hole Circle Diameter | 114.3 mm |
| Minimum thickness | 26 mm |
| Brake Disc Thickness | 28 mm |
| Thickness | 53.7 mm |
| Placement on Vehicle | Front Axle |
| Outer diameter | 320 mm |
| Rim Hole Number | 6 -Hole |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.98
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Rotor Style | Internally Vented |
| Weight | 12.150 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 53.5 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30.5 mm |
| Bolt Hole Circle Diameter | 127 mm |
| Centering Diameter | 72 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.98
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 9.88 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 39.7 mm |
| Brake Disc Thickness | 28 mm |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Type | Brake Disc Rotor |
| Replaces | 44053 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£89.98
Important compatibility info
| Number of Connectors / Ports | 5 |
| Extra Description | febi Plus |
| Function | Resistor, interior blower |
| Weight | 0.20 kg |
| Type | Resistor, interior blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.00
Important compatibility info
| Weight | 4.45 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 781 mm |
| Min. Length | 479 mm |
| Pipe Diameter | 63.4 mm. 54 mm |
| Mounting points diameter | 16 mm. 20 mm |
| Piston conrod diameter | 15 mm |
| Function | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
| Type | Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.03
Important compatibility info
| Placement on Vehicle | Front |
| Weight | 0.620 kg |
| Bolt Hole Circle Diameter | 96 mm |
| Function | Joint, propshaft |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.03
Important compatibility info
| Weight | 2.148 kg |
| Core Width | 510 mm |
| Function | Condenser, air conditioning |
| Core Depth | 16 mm |
| Type | Condenser, air conditioning |
| Core Length | 535 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.04
Important compatibility info
| Type | Condenser, air conditioning |
| Core Width | 531 mm |
| Function | Condenser, air conditioning |
| Core Length | 540 mm |
| Core Depth | 16 mm |
| Weight | 3.51 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.04
Important compatibility info
| Weight | 8.07 kg |
| Placement on Vehicle | non-steered leading axle |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Outer diameter | 229 mm. 198 mm |
| Thickness | 249 mm. 565 mm |
| Type | Bellow, air suspension |
| Additional Information | with piston, with piston rod |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.06
Important compatibility info
| Thickness | 154 mm |
| Width | 358 mm |
| Material | PP (Polypropylene) |
| Weight | 2.415 kg |
| Function | Expansion Tank, coolant |
| Fill quantity | 5.768 l |
| Length | 531 mm |
| Extra Description | ProKit |
| Type | Expansion Tank, coolant |
| Additional Information | with lids, with coolant level sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.07
Important compatibility info
| Weight | 1.8 kg |
| Width | 30 mm |
| Number of Teeth | 120 |
| Function | Water Pump & Timing Belt Kit |
| Belts | with rounded tooth profile |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 038 198 119 S1 |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Water pump impeller material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (24706)
- 1x Febi Water Pump, engine cooling (24360)
£90.08
Important compatibility info
| Weight | 1.162 kg |
| Inner length 1 | 1086 mm |
| Outer length 1 | 1481 mm |
| Inner length 2 | 1012 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Outer length 2 | 1330 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.08
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 10.99 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 302 mm |
| Thickness | 61 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 139.7 mm |
| Centering Diameter | 98 mm |
| Surface | Coated |
| Number of mounting bores | 2 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Rim Hole Number | 6 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.09
Important compatibility info
| Vehicle Equipment | for vehicles with headlight levelling |
| for OE number | 2 252 075 |
| Control Type | Rotary Operation |
| Type | Switch, headlight |
| Function | Switch, headlight |
| Combi Switch Function | with hazard warning light function, with light dimmer function |
| Weight | 0.125 kg |
| Number of Connectors / Ports | 13 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.13
Important compatibility info
| Placement on Vehicle | Lower, Front Axle Right |
| Material | Cast Steel |
| Additional Information 2 | without ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 174796 |
| Weight | 9.29 kg |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.16
Important compatibility info
| Weight | 9.29 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 174795 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Lower, Front Axle Left |
| Material | Cast Steel |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.16
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 8.32 kg |
| Placement on Vehicle | Rear Axle |
| Length | 542 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 46 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.17
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake caliper piston diameter | 38 mm |
| Function | Brake Caliper |
| Paired article numbers | 184106 |
| Weight | 1.95 kg |
| Type | Brake Caliper |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Aluminium |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Left |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.20
Important compatibility info
| Vehicle Equipment | for vehicles with electric parking brake |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 184105 |
| Weight | 1.95 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Additional Information | with electric motor |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.20
Important compatibility info
| Weight | 1.783 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Placement on Vehicle | Upper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.23
Important compatibility info
| Outer diameter | 365 mm |
| Number of mounting bores | 1 |
| Weight | 10.15 kg |
| Surface | Coated |
| Brake Disc Thickness | 20 mm |
| Bolt Hole Circle Diameter | 120 mm |
| Placement on Vehicle | Rear Axle |
| Minimum thickness | 18 mm |
| Centering Diameter | 79.1 mm |
| Thickness | 59 mm |
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.24
Important compatibility info
| Inner diameter | 14 mm |
| Placement on Vehicle | Front Axle |
| Material | Rubber/Metal |
| Outer diameter | 177 mm |
| Function | Repair Kit, suspension strut support mount |
| Extra Description | ProKit |
| Weight | 1.420 kg |
| Type | Repair Kit, suspension strut support mount |
| Additional Information 2 | with ball bearing, with fastening material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Repair Kit, suspension strut support mount (104271)
- 1x Febi Nut (34653)
- 6x Febi Screw (104749)
£90.26
Important compatibility info
| Rotor Style | Internally Vented |
| Rim Hole Number | 5 -Hole |
| Weight | 10.869 kg |
| Placement on Vehicle | Front Axle |
| Outer diameter | 324 mm |
| Minimum thickness | 25.4 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Thickness | 47 mm |
| Brake Disc Thickness | 28 mm |
| Surface | Coated |
| Function | Brake Disc |
| Number of mounting bores | 2 |
| Centering Diameter | 61 mm |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.30
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M22x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 6.179 kg |
| External Teeth, Diff.Side | 33 |
| Min. Length | 916 mm |
| Wheel Sided Joint Diameter | 77.4 mm |
| Transmission-side joint diameter | 75 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.32
Important compatibility info
| Additional Information | with piston |
| Outer diameter | 286 mm. 259 mm |
| Thickness | 640 mm. 240 mm |
| Weight | 11.65 kg |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
| External Thread Size | M22, M12 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.34
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| Placement on Vehicle | Left Rear, Right Rear |
| Weight | 4.200 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
| for OE number | 2136 889 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.34
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Material | Rubber/Metal |
| Thickness | 51 mm |
| Additional Information 2 | with fastening material, with ball bearing |
| Weight | 1.200 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.35
Important compatibility info
| Function | Housing, oil filter |
| Additional Information | with gasket/seal, with oil cooler, with oil filter |
| Weight | 2.750 kg |
| Extra Description | febi Plus |
| Type | Housing, oil filter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.41
Important compatibility info
| Placement on Vehicle | Rear Axle, Front Axle |
| Length | 206.2 mm |
| Width | 104 mm |
| Additional Information 2 | with fastening material |
| Wear Warning Contact | prepared for wear warning indicator |
| Inspection Tag | R90 |
| Weight | 10.58 kg |
| Thickness/Strength 1 | 31.8 mm |
| Type | Brake Pad Set, disc brake |
| Function | Brake Pad Set, disc brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.44
Important compatibility info
| Weight | 8.44 kg |
| Rotor Style | Internally Vented |
| Rim Hole Number | 8 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Thickness | 70 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 23 mm |
| Bolt Hole Circle Diameter | 96 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.50
Important compatibility info
| Weight | 0.16 kg |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.51
Important compatibility info
| Placement on Vehicle | before soot particulate filter |
| Number of Connectors / Ports | 2 |
| Function | Sensor, exhaust gas temperature |
| Weight | 0.078 kg |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.53
Important compatibility info
| Weight | 8.109 kg |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Thickness | 5.7 mm |
| Placement on Vehicle | Front Axle |
| Length | 1546 mm |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M20 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.54
Important compatibility info
| Weight | 1.299 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 120 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR, G53HP |
| Part number of the recommended special tools | ADK85501 |
| Replaces | 49622 |
| Extra Description | Full Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (23778)
- 1x Febi Tensioner, timing chain (28458)
- 1x Febi Guide, timing chain (31543)
- 1x Febi Guide, timing chain (31544)
- 1x Febi Sprocket, crankshaft (31545)
- 1x Febi Gear/Sprocket, camshaft (31546)
- 1x Febi Gasket, timing case (32153)
- 1x Febi Shaft Seal, crankshaft (32154)
- 1x Febi Pulley Bolt (47593)
- 1x Febi Oil Hose (49568)
£90.56
Important compatibility info
| Weight | 0.7 kg |
| Type | Mounting Kit, charger |
| Function | Mounting Kit, charger |
| for OE number | 11 65 7 802 595 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.59
Important compatibility info
| Number of Connectors / Ports | 2 |
| Weight | 0.551 kg |
| Type | Hydraulic Hose, steering |
| Function | Hydraulic Hose, steering |
| External Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.59
Important compatibility info
| Function | Repair Kit, suspension strut support mount |
| Weight | 1.33 kg |
| Paired article numbers | 182138 |
| Type | Repair Kit, suspension strut support mount |
| Placement on Vehicle | Front Axle Right |
| Material | Rubber/Metal |
| Additional Information 2 | with fastening material, with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Suspension Strut Support Mount (39575)
- 1x Febi Rolling Bearing, suspension strut support mount (179052)
- 3x Febi Nut (37858)
£90.59
Important compatibility info
| Weight | 9.5 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Width | 64.5 mm |
| Outer diameter | 298 mm |
| Thickness | 97.9 mm |
| Inner diameter | 254 mm |
| Bolt Hole Circle Diameter | 118 mm |
| Centering Diameter | 72 mm |
| Number of mounting bores | 2 |
| Max.skimmed drum measure | 255.6 mm |
| Function | Brake Drum |
| Type | Brake Drum |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£90.60
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023