Important compatibility info
Weight | 8.6 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 228 mm. 205 mm |
Thickness | 410 mm. 240 mm |
Function | Bellow, air suspension |
External Thread Size | M14 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston, with piston rod |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Condenser, air conditioning |
Function | Condenser, air conditioning |
Core Width | 516 mm |
Core Length | 311 mm |
Additional Information 2 | without dryer |
Core Depth | 18 mm |
Refrigerant | R 134a |
Weight | 1.432 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Seal Material | Paper, Rubber |
Water pump impeller material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Number of Wings | 12 |
Type | Water Pump, engine cooling |
Weight | 10.05 kg |
Additional Information | with gaskets/seals |
for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Front, Lower |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 196589 |
Weight | 2.501 kg |
Cone Size | 12.2 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Right, Front, Lower |
Additional Information | with rubber mounts |
Material | Aluminium |
Steering arm type | Control Arm |
Paired article numbers | 196588 |
Weight | 2.501 kg |
Cone Size | 12.2 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 1.8 kW |
Weight | 3.6 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with fastening/mounting material |
Function | Suspension, propshaft |
Type | Suspension, propshaft |
Bearing Type | Ball Bearing |
Additional Information 2 | with rolling bearing |
Inner diameter | 41 mm |
Weight | 1.456 kg |
Length | 200 mm |
Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.41 kg |
Outer diameter | 390 mm |
Voltage | 12 V |
Rated Power | 187 W |
Function | Fan, engine cooling |
Type | Fan, engine cooling |
Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Solenoid Valve |
Function | Solenoid Valve |
Weight | 0.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Outer diameter | 286 mm. 259 mm |
Weight | 12.5 kg |
Thickness | 752 mm. 257 mm |
Function | Bellow, air suspension |
External Thread Size | M22 x 1,5, M12 x 1,75 |
Type | Bellow, air suspension |
Additional Information | with piston |
Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Extra Description | febi Plus |
Function | Connecting Cable, injector |
Type | Connecting Cable, injector |
Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 81.96210.0601 |
Weight | 4.0 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Function | Mounting, engine |
Placement on Vehicle | both sides |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left |
Length | 555 mm |
Outer diameter | 6 mm |
Operating Mode | Mechanical |
Weight | 0.050 kg |
Type | Cable Pull, seat back adjustment |
Function | Cable Pull, seat back adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.620 kg |
Material | PP (Polypropylene) |
Type | Expansion Tank, coolant |
Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.530 kg |
Type | Cylinder Head Gasket Set, air compressor |
Function | Cylinder Head Gasket Set, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Bellow, air suspension |
Weight | 12.700 kg |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Outer diameter | 286 mm. 226 mm |
Thickness | 350 mm. 210 mm |
Rolling piston material | Steel |
External Thread Size | M16 x 1,5 |
Type | Bellow, air suspension |
Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.15 kg |
Function | Hydraulic Pump, steering |
Number of Connectors / Ports | 2 |
Pressure | 180 bar |
Rotation Direction | Clockwise rotation |
Internal Thread Size | M18 x 1,5, M26 x 1,5 |
Type | Hydraulic Pump, steering |
for OE number | 81.47101.6137 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.3 kg |
Placement on Vehicle | Rear |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom eye |
Max. Length | 256 mm |
Min. Length | 157 mm |
Pipe Diameter | 42 mm. 78 mm |
Mounting points diameter | 12 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Rear Axle Left |
Function | Drive Shaft |
Type | Drive Shaft |
Transmission-side joint diameter | 99 mm |
Wheel Sided Joint Diameter | 83 mm |
Additional Information 2 | with nut |
Thread Size | M27x1,5 |
Bolt Hole Circle Diameter | 86 mm |
Bore Diameter | 10.5 mm |
External Teeth, Wheel Side | 30 |
Weight | 5.778 kg |
Number of mounting bores | 6 |
Min. Length | 626 mm |
ABS Ring Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.87 kg |
Width of castor bearing surface | 26 mm |
Outer diameter | 75 mm |
Operating Mode | Automatic |
Type | Belt Tensioner, v-ribbed belt |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Plastic |
for OE number | 059 145 201 E |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 42 mm. 81 mm |
Mounting points diameter | 25 mm |
Placement on Vehicle | Front |
Piston conrod diameter | 12 mm |
Function | Shock Absorber, driver cab suspension |
Weight | 3.83 kg |
Operating Mode | Mechanical |
Shock Absorber Mounting Type | Top eye, Bottom Pin |
Max. Length | 335 mm |
Min. Length | 290 mm |
External Thread Size | M14 x 1,5 |
Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 29 mm |
Outer diameter | 156 mm |
Inner diameter | 25 mm |
Weight | 1.306 kg |
Parameter | 7PK |
Type | Belt Pulley, crankshaft |
Function | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.850 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Aluminium |
Inner diameter | 12 mm |
Steering arm type | Control Arm |
Paired article numbers | 23939 |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 2 |
Function | Auxiliary water pump (cooling water circuit) |
Type | Auxiliary water pump (cooling water circuit) |
Weight | 1.100 kg |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information | with gasket/seal |
Seal Material | Rubber/Metal |
Operating Mode | pneumatic |
Water pump impeller material | Metal |
Type | Water Pump, engine cooling |
Weight | 1.349 kg |
Number of grooves | 7 |
Additional Information 2 | switchable water pump |
Material | Cast Aluminium |
Function | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 3.014 kg |
Length | 200 mm |
Function | Repair Kit, kingpin |
Type | Repair Kit, kingpin |
Outer diameter | 43 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Kingpin (24773)
- 1x Febi Bush, kingpin (171963)
- 2x Febi Lock Ring, steering knuckle (03728)
- 2x Febi Grease Nipple (06533)
- 2x Febi Seal Ring, steering knuckle (03725)
- 2x Febi Lock Ring, steering knuckle (171964)
- 2x Febi Circlip (03729)
- 1x Febi Spacer, kingpin (28069)
- 1x Febi Spacer, kingpin (28070)
- 1x Febi Spacer, kingpin (28071)
- 1x Febi Spacer, kingpin (28072)
- 1x Febi Spacer, kingpin (28073)
- 1x Febi Spacer, kingpin (28074)
- 1x Febi Spacer, kingpin (28075)
- 1x Febi Spacer, kingpin (28076)
- 1x Febi Bush, steering knuckle (107409)
- 1x Febi Seal Ring, steering knuckle (107195)
Important compatibility info
Length | 1030 mm |
Thickness | 116 mm |
Function | Centre Rod Assembly |
Weight | 7.9 kg |
Additional Information | with castellated nut and split pins |
Rod/Strut | Guide Rod |
Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd front axle |
Cone Size | 30 mm |
Pipe Diameter | 40 mm |
Extra Description | ProKit |
Internal Thread Size | M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.09 kg |
Number of Ribs | 5 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Outer diameter | 143 mm |
Inner diameter | 30 mm |
Thickness | 47.5 mm |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 12 |
Rated Power | 1.7 kW |
Type | Starter |
Function | Starter |
Weight | 3.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.075 kg |
Number of Teeth | 46 |
for OE number | 48 12 907 |
Placement on Vehicle | Exhaust Side |
Type | Camshaft Adjuster |
Function | Camshaft Adjuster |
Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023