Proud to be a UK-based company
Contact us
Important compatibility info
| Cone Size | 19 mm |
| Placement on Vehicle | Front Axle Right, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 37690 |
| Material | Cast Steel |
| Function | Control/Trailing Arm, wheel suspension |
| Internal Thread Size | M14 x 1,5 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Weight | 5.00 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.726 kg |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| ABS Ring Diameter | 82 mm |
| External Teeth, Wheel Side | 36 |
| Transmission-side joint diameter | 96 mm |
| Min. Length | 992 mm |
| Weight | 10.500 kg |
| Additional Information 2 | with screw |
| Thread Size | M10x1,5 |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
| Type | Drive Shaft |
| Wheel Sided Joint Diameter | 98.1 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Length | 34 mm |
| External Thread Size | M16 x 1,5 |
| Number of Connectors / Ports | 4 |
| Additional Information 2 | with seal ring |
| Weight | 0.1 kg |
| Type | Oil Pressure Switch |
| Function | Oil Pressure Switch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Width | 25 mm |
| Surface | Coated |
| Type | Timing Belt Kit |
| Function | Timing Belt Kit |
| Number of Teeth | 97 |
| Units / Pulleys | incl. hydraulic belt tensioner |
| Weight | 0.960 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt (26847)
- 1x Febi Tensioner, timing belt (18574)
- 1x Febi Tensioner, timing belt (32577)
£93.84
Important compatibility info
| Weight | 0.885 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Extra Description | Standard Medium Kit |
| Type | Timing Chain Kit |
| for OE number | 03C 109 158 A S4 |
Additional Information
Technical Information
Warning! This timing chain kit can only be installed if the timing chain drive system has been not modified by the OE manufacturer. This can be established by checking the service history of the vehicle or by checking the OE part numbers on the modified camshaft adjusters (03C 109 571 K / 03C 109 088 G). Please note our technical information.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (40390)
- 1x Febi Tensioner, timing chain (36484)
- 1x Febi Guide, timing chain (36085)
- 1x Febi Guide, timing chain (36224)
- 1x Febi Shaft Seal, crankshaft (32471)
- 1x Febi Gasket, timing case cover (102422)
- 2x Febi Gasket, timing case (106575)
- 1x Febi Seal Ring, timing chain tensioner (171597)
£93.84
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Rotation Direction | Clockwise rotation |
| Pulleys | with belt pulley |
| Number of mounting bores | 4 |
| Weight | 3.496 kg |
| Mounting points diameter | 9 mm |
| for OE number | 1 721 917 |
| Type | Hydraulic Pump, steering |
| Number of Connectors / Ports | 2 |
| Operating pressure to | 12 bar |
| Function | Hydraulic Pump, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Material | Aluminium |
| Weight | 0.820 kg |
| Type | Oil Cooler, engine oil |
| Function | Oil Cooler, engine oil |
| Core Length | 194 mm |
| Core Width | 95 mm |
| Core Depth | 35 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.84
Important compatibility info
| Weight | 3.720 kg |
| Outer diameter | 185 mm |
| Thickness | 35 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.85
Important compatibility info
| Placement on Vehicle | Exhaust Side |
| Weight | 0.115 kg |
| Type | Control Valve, camshaft adjustment |
| Number of Connectors / Ports | 2 |
| Function | Control Valve, camshaft adjustment |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.87
Important compatibility info
| Additional Information | with piston |
| External Thread Size | M16 x 1,5, M10 x 1,6, M16 x 2 |
| Weight | 8.8 kg |
| Outer diameter | 258 mm. 227 mm |
| Thickness | 133 mm. 495 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.90
Important compatibility info
| Weight | 0.25 kg |
| for OE number | 06J 906 461 B |
| Housing Type | with housing |
| Type | Mass Air Flow Sensor |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.91
Important compatibility info
| Bearing/Mounting Type | Rubber-Metal Mount |
| for OE number | 52097849 |
| Placement on Vehicle | Right |
| Weight | 2.084 kg |
| Function | Mounting, engine |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.92
Important compatibility info
| Placement on Vehicle | Rear Axle, Front |
| Outer diameter | 258 mm. 225 mm |
| Thickness | 190 mm. 623 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Weight | 6.51 kg |
| External Thread Size | M16 x 1,5, M22 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.94
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 327 mm |
| Material | Rubber/Metal |
| Inner diameter | 21 mm |
| Weight | 7.008 kg |
| Type | Spring Shackle |
| Function | Spring Shackle |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.94
Important compatibility info
| Additional Information 2 | with seal ring |
| Weight | 0.960 kg |
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.96
Important compatibility info
| Weight | 2.006 kg |
| Type | Condenser, air conditioning |
| Function | Condenser, air conditioning |
| Core Length | 652 mm |
| Core Width | 341 mm |
| Core Depth | 16 mm |
| Additional Information 2 | with dryer |
| Refrigerant | R 134a |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£93.97
Important compatibility info
| Placement on Vehicle | Left, transmission sided |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Paired article numbers | 183708 |
| Type | Mounting, engine |
| Weight | 1.580 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.00
Important compatibility info
| Function | Bush, parabolic spring |
| Weight | 9.169 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.03
Important compatibility info
| Weight | 10.0 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 255 mm. 180 mm |
| Thickness | 280 mm. 165 mm |
| Function | Bellow, air suspension |
| External Thread Size | M16 x 1,5, M24 x 1,5 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£94.05
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023