Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 184888 |
| Weight | 3.602 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 21 mm |
| External Thread Size | M14 x 1,5 |
| Cone Size | 16.6 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.08
Important compatibility info
| Hole Spacing | 100 mm |
| Weight | 8.9 kg |
| Placement on Vehicle | Front Axle |
| Length | 660 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 40 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.11
Important compatibility info
| Housing Type | without housing |
| Weight | 0.05 kg |
| Function | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Type | Mass Air Flow Sensor |
| Number of Connectors / Ports | 8 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.12
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Extra Description | febi Plus |
| Function | Belt Tensioner, v-ribbed belt |
| Type | Belt Tensioner, v-ribbed belt |
| Weight | 0.594 kg |
| Outer diameter | 75 mm |
| Operating Mode | Electric |
| Material | Metal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Belt Tensioner, v-ribbed belt (102601)
- 1x Febi Cap (174341)
- 1x Febi Plug (173377)
£100.13
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M22x1,5 |
| Paired article numbers | 181902 |
| External Teeth, Wheel Side | 29 |
| Weight | 10.358 kg |
| External Teeth, Diff.Side | 39 |
| Min. Length | 1016 mm |
| Wheel Sided Joint Diameter | 93.5 mm |
| Transmission-side joint diameter | 91.1 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.15
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Weight | 1.870 kg |
| Placement on Vehicle | Right |
| for OE number | 11 21 063 87R |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.15
Important compatibility info
| Weight | 1.6 kg |
| Voltage | 12 V |
| Driver Position | for right-hand drive vehicles |
| Number of Connectors / Ports | 2 |
| Rated Power | 155 W |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.21
Important compatibility info
| Additional Information | with electric motor |
| Vehicle Equipment | for vehicles with electric parking brake |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Material | Cast Iron |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Placement on Vehicle | Rear Axle Left |
| Paired article numbers | 183229 |
| Weight | 2.9 kg |
| Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.22
Important compatibility info
| Weight | 1.719 kg |
| Inner diameter | 19 mm |
| Outer diameter | 135 mm |
| Width | 135 mm |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
| Parameter | 6PK |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.24
Important compatibility info
| Weight | 2.690 kg |
| Thickness | 50 mm |
| Inner diameter | 13 mm |
| Number of Ribs | 8 |
| Outer diameter 1 | 145 mm |
| Outer diameter 2 | 167 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK + 4PK |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.25
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 8.388 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 715 mm |
| Wheel Sided Joint Diameter | 89.8 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.28
Important compatibility info
| Weight | 7.62 kg |
| Rim Hole Number | 4 -Hole |
| Rotor Style | perforated/vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 316 mm |
| Thickness | 45.3 mm |
| Brake Disc Thickness | 22 mm |
| Minimum thickness | 20.4 mm |
| Bolt Hole Circle Diameter | 100 mm |
| Centering Diameter | 64.1 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.29
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Weight | 3.0 kg |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.30
Important compatibility info
| Hole Spacing | 115 mm |
| Weight | 11.05 kg |
| Placement on Vehicle | Front Axle |
| Length | 652 mm |
| Steering arm type | Trailing Arm |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 17 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.31
Important compatibility info
| Min. Length | 569 mm |
| External Teeth, Wheel Side | 36 |
| Bore Diameter | 10.5 mm |
| Placement on Vehicle | Front Axle Left |
| Thread Size | M16x1,5 |
| Bolt Hole Circle Diameter | 94 mm |
| Function | Drive Shaft |
| Wheel Sided Joint Diameter | 97.9 mm |
| Transmission-side joint diameter | 107.8 mm |
| Number of mounting bores | 6 |
| Weight | 7.062 kg |
| Type | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.34
Important compatibility info
| Placement on Vehicle | Front Axle |
| Outer diameter | 330 mm |
| Thickness | 44.7 mm |
| Brake Disc Thickness | 32 mm |
| Minimum thickness | 30 mm |
| Bolt Hole Circle Diameter | 98 mm |
| Centering Diameter | 59 mm |
| Surface | Coated |
| Number of mounting bores | 5 |
| Function | Brake Disc |
| Weight | 10.28 kg |
| Rim Hole Number | 5 -Hole |
| Type | Brake Disc Rotor |
| Rotor Style | Internally Vented |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.38
Important compatibility info
| Weight | 1.7 kg |
| Colour | Black |
| Function | Cylinder Head Cover |
| Material | PA (polyamide), ACM (Polyacrylate) |
| Extra Description | febi Plus |
| Type | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Replaces | 102208 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.39
Important compatibility info
| Internal Thread Size | M16 x 1,5 |
| Function | Spring-loaded Cylinder |
| Piston Rod Length | 15 mm |
| Distance of fastening bolts | 120 mm |
| Type | Spring-loaded Cylinder |
| Parameter | Typ 16 / 24 |
| Additional Information | with fastening/mounting material |
| Weight | 8.0 kg |
| Brake Type | Disc Brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.41
Important compatibility info
| Weight | 4.720 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 05022 |
| Steering arm type | Control Arm |
| Material | Sheet Steel |
| Placement on Vehicle | Front Axle Left, Lower |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.41
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 7.160 kg |
| External Teeth, Diff.Side | 25 |
| Min. Length | 624 mm |
| Wheel Sided Joint Diameter | 90.9 mm |
| Transmission-side joint diameter | 91.7 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.48
Important compatibility info
| Rotor Style | Internally Vented |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
| Number of mounting bores | 1 |
| Weight | 11.5 kg |
| Centering Diameter | 76 mm |
| Surface | Coated |
| Bolt Hole Circle Diameter | 120 mm |
| Outer diameter | 325 mm |
| Placement on Vehicle | Front Axle |
| Minimum thickness | 27 mm |
| Brake Disc Thickness | 30 mm |
| Thickness | 70 mm |
| Rim Hole Number | 5 -Hole |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.49
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.494 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.49
Important compatibility info
| Outer diameter | 252 mm. 311 mm |
| Thickness | 144 mm. 320 mm |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| External Thread Size | M22 x 1,5, M12 x 2, M16 x 2 |
| Function | Bellow, air suspension |
| Weight | 9.5 kg |
| Type | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.50
Important compatibility info
| Length | 210 mm |
| Width | 135 mm |
| Thickness | 152 mm |
| Function | Bush, parabolic spring |
| Weight | 10.604 kg |
| Type | Bush, parabolic spring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.56
Important compatibility info
| Function | Sensor, exhaust gas temperature |
| Weight | 0.07 kg |
| Spanner Size | 17 |
| External Thread Size | M14 x 1,5 |
| Cable Length | 479 mm |
| Number of Connectors / Ports | 2 |
| Placement on Vehicle | before exhaust turbocharger |
| Type | Sensor, exhaust gas temperature |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.58
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Weight | 3.22 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 06 52 171 |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.62
Important compatibility info
| Weight | 0.694 kg |
| Inner diameter | 17 mm |
| Outer diameter | 62 mm |
| Width | 53 mm |
| Number of Ribs | 6 |
| Type | Alternator Freewheel Clutch |
| Function | Alternator Freewheel Clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.62
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 19 |
| Rated Power | 1.95 kW |
| Weight | 5.54 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.63
Important compatibility info
| Type | Fuel Cut-off, injection system |
| Number of Connectors / Ports | 2 |
| Weight | 0.444 kg |
| Function | Fuel Cut-off, injection system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.64
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower |
| Steering arm type | Control Arm |
| Paired article numbers | 43010 |
| Weight | 0.832 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.64
Important compatibility info
| Weight | 7.698 kg |
| Placement on Vehicle | Front Axle Right |
| External Teeth, Diff.Side | 22 |
| Additional Information 2 | with nut |
| Thread Size | M20x1,5 |
| External Teeth, Wheel Side | 24 |
| Transmission-side joint diameter | 79 mm |
| Wheel Sided Joint Diameter | 83.8 mm |
| Min. Length | 958 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.67
Important compatibility info
| Weight | 3.32 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 108819 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint, with rubber mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.67
Important compatibility info
| Driver Position | for right-hand drive vehicles |
| Weight | 0.55 kg |
| Placement on Vehicle | Right |
| Function | Front Cover Lock |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Thickness | 248 mm. 565 mm |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Outer diameter | 228 mm. 205 mm |
| Function | Bellow, air suspension |
| Weight | 8.7 kg |
| External Thread Size | M14 x 1,5 |
| Rolling piston material | Steel |
| Type | Bellow, air suspension |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Placement on Vehicle | Left |
| Function | Front Cover Lock |
| Weight | 0.53 kg |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Weight | 1.65 kg |
| Number of Teeth | 150 |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| for OE number | 06A 198 119 B S1 |
| Belts | with rounded tooth profile |
| Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
| Water pump impeller material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (37642)
- 1x Febi Water Pump, engine cooling (15900)
£100.68
Important compatibility info
| Function | Wheel Bearing Kit |
| Inner diameter | 33 mm |
| Width | 67 mm |
| Bearing Type | Tapered Roller Bearing |
| Outer diameter | 91 mm |
| Weight | 5.10 kg |
| Placement on Vehicle | Rear Axle |
| Additional Information | with fastening/mounting material |
| Type | Wheel Bearing Kit |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Wheel Bearing (174064)
- 1x Febi Split Pin (173993)
£100.68
Important compatibility info
| for OE number | 005 430 65 01 |
| Function | Brake Master Cylinder |
| Weight | 0.660 kg |
| Internal Thread Size | M12 x 1 |
| Type | Brake Master Cylinder |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Weight | 0.870 kg |
| Placement on Vehicle | Front Axle |
| Function | Hydraulic Hose, steering |
| Type | Hydraulic Hose, steering |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.68
Important compatibility info
| Weight | 0.92 kg |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 108 |
| Type | Timing Chain Kit |
| Function | Timing Chain Kit |
| Timing Chain Size | G67HP, G67HR |
| Replaces | 44958 |
| Additional Information | with chain tensioner, with slide rails |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (33899)
- 1x Febi Tensioner, timing chain (30496)
- 1x Febi Guide, timing chain (30531)
£100.68
Important compatibility info
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 142 |
| Function | Timing Chain Kit |
| Weight | 0.951 kg |
| Additional Information | with slide rails, with chain tensioner |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| for OE number | 11 34 8 649 768 S1 |
| Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29868)
- 1x Febi Tensioner, timing chain (21275)
- 1x Febi Guide, timing chain (29536)
- 1x Febi Guide, timing chain (29537)
£100.69
Important compatibility info
| Weight | 1.416 kg |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Bearing/Mounting Type | Hydro Mount |
| Placement on Vehicle | Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.71
Important compatibility info
| Weight | 0.166 kg |
| Type | Oil Line, charger |
| Forward- /Backflow | Supply Line |
| Function | Oil Line, charger |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.71
Important compatibility info
| Min. Length | 1004 mm |
| Wheel Sided Joint Diameter | 98 mm |
| Additional Information 2 | with nut |
| Paired article numbers | 182958 |
| Weight | 11.987 kg |
| Thread Size | M24x1,5 |
| Type | Drive Shaft |
| Transmission-side joint diameter | 88.7 mm |
| Additional Information | with Split Pin |
| Function | Drive Shaft |
| Placement on Vehicle | Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Function | Front Cover Lock |
| Type | Front Cover Lock |
| Weight | 0.55 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Type | Hydraulic Pump, steering |
| Number of mounting bores | 3 |
| Weight | 1.700 kg |
| Operating pressure to | 11 bar |
| Function | Hydraulic Pump, steering |
| Operating Mode | Hydraulic |
| Outer diameter | 17 mm |
| Rotation Direction | Clockwise rotation |
| Number of Connectors / Ports | 2 |
| Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Extra Description | febi Plus |
| Weight | 1.858 kg |
| Type | Cylinder Head Cover |
| Function | Cylinder Head Cover |
| Additional Information | with gasket/seal |
| Material | Plastic |
| for OE number | 11 12 7 568 582 |
| Colour | Black |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Bolt Hole Circle Diameter | 110 mm |
| Additional Information | with nuts |
| Outer diameter | 150 mm |
| Additional Information 2 | with bolts/screws, with washers |
| Inner diameter | 64 mm |
| Function | Joint, propshaft |
| Weight | 1.49 kg |
| Number of Holes | 8 |
| Extra Description | ProKit |
| Type | Joint, propshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Joint, propshaft (27582)
- 8x Febi Screw (19106)
- 8x Febi Washer (19107)
- 8x Febi Nut (19104)
£100.72
Important compatibility info
| Length | 206 mm |
| Width | 155 mm |
| Thickness | 92 mm |
| Function | Oil Cooler, engine oil |
| Type | Oil Cooler, engine oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
Important compatibility info
| Weight | 3.9 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 81 mm |
| Bearing Type | Angular Ball Bearing |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Width | 136 mm |
| Type | Wheel Bearing Kit |
| Additional Information | with fastening/mounting material |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated magnetic sensor ring, with ABS sensor ring |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£100.72
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023