Important compatibility info
Number of Teeth | 41 |
Weight | 0.760 kg |
Type | Gear, air compressor |
Function | Gear, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.625 kg |
Additional Information | with gaskets/seals |
Type | EGR Valve |
Function | EGR Valve |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Belt Pulley, crankshaft |
Parameter | 6PK |
Number of Ribs | 5 |
Inner diameter | 10 mm. 45 mm |
Outer diameter | 185 mm |
Material | Rubber/Metal |
Weight | 3.34 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Thread Size | M22x1,5 |
Weight | 7.042 kg |
Min. Length | 639 mm |
Wheel Sided Joint Diameter | 90.9 mm |
Transmission-side joint diameter | 86.2 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Placement on Vehicle | Front Axle Left |
Additional Information 2 | with screw |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.57 kg |
Placement on Vehicle | Rear Axle |
Width | 40 mm |
Outer diameter | 228 mm |
Inspection Tag | ECE R90 Approved |
Mounting Type | Pre-assembled |
Function | Brake Shoe Set |
Piston Diameter | 20.6 mm |
Type | Brake Shoe Set |
Additional Information | with accessories, with wheel brake cylinder, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.96 kg |
Outer diameter | 70 mm |
Operating Mode | Automatic |
Housing material | Aluminium |
Function | Belt Tensioner, v-ribbed belt |
Track rollers material | Metal |
Type | Belt Tensioner, v-ribbed belt |
Width of castor bearing surface | 26 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 11 61 7 501 566 S1 |
Weight | 0.33 kg |
Material | Plastic |
Colour | Black |
Function | Valve, crankcase ventilation |
Extra Description | febi Plus |
Type | Valve, crankcase ventilation |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Valve, crankcase ventilation (26100)
- 1x Febi Hose, crankcase ventilation (36031)
- 1x Febi Hose, crankcase ventilation (33113)
- 1x Febi Hose, crankcase ventilation (46301)
- 1x Febi Hose, crankcase ventilation (46302)
Important compatibility info
Operating Mode | Electric-pneumatic |
Number of Connectors / Ports | 2 |
Type | Pressure converter, turbocharger |
Function | Pressure converter, turbocharger |
Extra Description | febi Plus |
Weight | 0.2 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.67 kg |
Function | Brake Master Cylinder |
Type | Brake Master Cylinder |
Material | Aluminium |
Piston Diameter | 23.8 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Weight | 3.274 kg |
Paired article numbers | 186223 |
Vehicle Equipment | for vehicles with electric parking brake |
Brake Caliper Type | Brake Caliper (1 piston) |
Material | Cast Iron |
Function | Brake Caliper |
Placement on Vehicle | Rear Axle Left |
Additional Information | with electric motor |
Brake caliper piston diameter | 42 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Type | Brake Caliper |
Weight | 3.274 kg |
Paired article numbers | 186222 |
Function | Brake Caliper |
Brake caliper piston diameter | 42 mm |
Brake Caliper Type | Brake Caliper (1 piston) |
Vehicle Equipment | for vehicles with electric parking brake |
Placement on Vehicle | Rear Axle Right |
Additional Information | with electric motor |
Material | Cast Iron |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.24 kg |
Internal Thread Size | M26 x 1,5, M16 x 1,5 |
Rotation Direction | Anticlockwise rotation |
Number of Connectors / Ports | 2 |
Mounting points diameter | 10.5 mm |
Type | Hydraulic Pump, steering |
Function | Hydraulic Pump, steering |
for OE number | 002 460 54 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.4 kg |
Driver Position | for right-hand drive vehicles |
Function | Interior Blower |
Number of Connectors / Ports | 2 |
Type | Interior Blower |
Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 7.27 kg |
Placement on Vehicle | Front Axle Right, Upper |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 43093 |
Function | Control/Trailing Arm, wheel suspension |
Cone Size | 17 mm |
External Thread Size | M16 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information 2 | with ball joint |
Cone Size 2 | 19 mm |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
for OE number | 24321-03000 S2 |
Chain Type | Silent Chain, Closed chain |
Number of Chain Links | 160 |
Type | Timing Chain Kit |
Function | Timing Chain Kit |
Weight | 0.838 kg |
Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (176113)
- 1x Febi Tensioner, timing chain (108339)
- 1x Febi Guide, timing chain (181876)
- 1x Febi Guide, timing chain (177613)
- 1x Febi Guide, timing chain (108342)
- 1x Febi Guide, timing chain (108343)
Important compatibility info
Steering arm type | Control Arm |
Cone Size | 25 mm |
Paired article numbers | 180968 |
Weight | 7.631 kg |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Placement on Vehicle | Front Axle Right |
Material | Sheet Steel |
Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 4.491 kg |
Type | Air Dryer, compressed-air system |
Function | Air Dryer, compressed-air system |
Voltage | 24 V |
Additional Information 2 | with dryer, with integrated oil separator |
Rated Power | 100 W |
Cut-off Pressure | 12 bar |
Operating pressure to | 13 bar |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Left Front |
Additional Information | with electric motor |
Operating Mode | Electric |
Paired article numbers | 178869 |
Number of Connectors / Ports | 2 |
Weight | 1.6 kg |
Type | Window Regulator |
Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 8 |
Rated Power | 0.8 kW |
Weight | 3.3 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Outer diameter | 149 mm |
Thickness | 32 mm |
Inner diameter | 31 mm |
Number of Ribs | 5 |
Number of Connectors / Ports | 6 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Weight | 1.92 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.943 kg |
Type | Belt Tensioner, v-ribbed belt |
Operating Mode | Automatic |
Outer diameter | 70 mm |
Material | Metal |
Width of castor bearing surface | 30 mm |
Function | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.442 kg |
Type | Clutch Release Bearing |
Function | Clutch Release Bearing |
for OE number | 81.30550.0089 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Weight | 3.22 kg |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
for OE number | 06 52 171 |
Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Inner length 1 | 912 mm |
Function | Cable Pull, manual transmission |
Type | Cable Pull, manual transmission |
Driver Position | for right-hand drive vehicles |
Weight | 1.358 kg |
Inner length 2 | 722 mm |
Outer length 1 | 1070 mm |
Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Weight | 4.5 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Water pump impeller material | Plastic |
Function | Water Pump & Timing Belt Kit |
Type | Water Pump & Timing Belt Kit |
Weight | 1.42 kg |
Seal Material | Rubber |
Belts | with trapezoidal tooth profile |
Number of Teeth | 168 |
for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
Important compatibility info
External Thread Size | M16 |
Function | Oil Sump |
Extra Description | febi Plus |
Type | Oil Sump |
Length | 429 mm |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
Spanner Size | 22 |
Weight | 3.361 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with wheel studs |
Placement on Vehicle | Front Axle |
Outer diameter | 290 mm |
Weight | 21.0 kg |
Bolt Hole Circle Diameter | 205 mm |
Brake Disc Thickness | 25.2 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 23 mm |
Thickness | 160 mm |
Function | Brake Disc |
Surface | Coated |
External Thread Size | M18 x 1,5 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Chain Links | 110 |
Chain Type | Simplex, with chain lock |
Weight | 1.570 kg |
Function | Timing Chain Kit |
for OE number | ME192230 S2 |
Type | Timing Chain Kit |
Extra Description | Basic Short Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain Kit (102440)
- 1x Febi Guide, timing chain (106656)
Important compatibility info
Width | 40.6 mm |
Outer diameter | 54 mm |
Inner diameter | 17 mm |
Number of Ribs | 6 |
Tightening Torque | 85 Nm |
Function | Alternator Freewheel Clutch |
Weight | 0.458 kg |
Additional Information 2 | with lid |
Type | Alternator Freewheel Clutch |
Additional Information
Technical Information
Depending on fitted component and/or vehicle specification the use of a special tool can be necessary
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023