Proud to be a UK-based company
Contact us
Important compatibility info
| Seal Material | Paper, Rubber |
| Water pump impeller material | Grey Cast Iron |
| Function | Water Pump, engine cooling |
| Material | Grey Cast Iron |
| Number of Wings | 12 |
| Type | Water Pump, engine cooling |
| Weight | 10.05 kg |
| Additional Information | with gaskets/seals |
| for OE number | 51.06500.6708 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.69
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front, Lower |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 196589 |
| Weight | 2.501 kg |
| Cone Size | 12.2 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.69
Important compatibility info
| Placement on Vehicle | Front Axle Right, Front, Lower |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 196588 |
| Weight | 2.501 kg |
| Cone Size | 12.2 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.69
Important compatibility info
| Weight | 2.41 kg |
| Outer diameter | 390 mm |
| Voltage | 12 V |
| Rated Power | 187 W |
| Function | Fan, engine cooling |
| Type | Fan, engine cooling |
| Number of Wings | 7 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Additional Information | with fastening/mounting material |
| Function | Suspension, propshaft |
| Type | Suspension, propshaft |
| Bearing Type | Ball Bearing |
| Additional Information 2 | with rolling bearing |
| Inner diameter | 41 mm |
| Weight | 1.456 kg |
| Length | 200 mm |
| Hole Spacing | 168 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 1.8 kW |
| Weight | 3.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.70
Important compatibility info
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bore Diameter | 14 mm |
| Shock Absorber Type | Gas Pressure |
| Shock Absorber System | Twin-Tube |
| Shock Absorber Design | Telescopic Shock Absorber |
| Weight | 1.400 kg |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 297 mm |
| Min. Length | 207 mm |
| Pipe Diameter | 53 mm. 45 mm |
| Type | Shock Absorber |
| Function | Shock Absorber |
| External Thread Size | M10 x 1,25 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.74
Important compatibility info
| Type | Solenoid Valve |
| Function | Solenoid Valve |
| Weight | 0.750 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.74
Important compatibility info
| Weight | 1.790 kg |
| Placement on Vehicle | Right |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| for OE number | 51894348 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.76
Important compatibility info
| Outer diameter | 286 mm. 259 mm |
| Weight | 12.5 kg |
| Thickness | 752 mm. 257 mm |
| Function | Bellow, air suspension |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.79
Important compatibility info
| for OE number | 81.96210.0601 |
| Weight | 4.0 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Function | Mounting, engine |
| Placement on Vehicle | both sides |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.81
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Length | 918 mm |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 25 |
| Weight | 7.752 kg |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 85.2 mm |
| Transmission-side joint diameter | 81.5 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.81
Important compatibility info
| Length | 565 mm |
| Width | 263 mm |
| Material | PP (Polypropylene) |
| Thickness | 390 mm |
| Function | Expansion Tank, coolant |
| Extra Description | ProKit |
| Weight | 3.760 kg |
| Fill quantity | 12 l |
| Type | Expansion Tank, coolant |
| Additional Information | with lids |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Piston conrod diameter | 12 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 247 mm |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Pipe Diameter | 82 mm. 42 mm |
| Mounting points diameter | 14 mm |
| Max. Length | 284 mm |
| External Thread Size | M14 x 1,5 |
| Weight | 3.93 kg |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Internal Thread Size | M24 x 1,5 LHT |
| External Thread Size | M20 x 1,5 |
| Weight | 5.210 kg |
| Placement on Vehicle | Front Axle |
| Length | 1018 mm |
| Outer diameter | 30 mm |
| Rod/Strut | Push Rod |
| Cone Size | 26 mm |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Type | Sealing Set, air compressor |
| Weight | 0.35 kg |
| Function | Sealing Set, air compressor |
| for OE number | 001 130 36 15 SK1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Function | Wheel Bearing Kit |
| Outer diameter 2 | 154 mm |
| Outer diameter 1 | 72 mm |
| Width | 48.5 mm |
| Outer diameter | 92 mm |
| Additional Information 2 | Wheel Bearing integrated into wheel hub, with integrated ABS sensor |
| Inner diameter | 30 mm |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.726 kg |
| Type | Wheel Bearing Kit |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 30 |
| Weight | 7.402 kg |
| Thread Size | M22x1,5 |
| Additional Information 2 | with nut |
| Transmission-side joint diameter | 89 mm |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Min. Length | 628 mm |
| External Teeth, Diff.Side | 24 |
| Wheel Sided Joint Diameter | 90 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Sheet Steel |
| Additional Information 2 | with crown nut |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 20 mm |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
| Paired article numbers | 179167 |
| Weight | 7.954 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24 x 1,5 |
| Bolt Hole Circle Diameter | 114 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 29 |
| Weight | 7.658 kg |
| Min. Length | 547 mm |
| ABS Ring Diameter | 87 mm |
| Wheel Sided Joint Diameter | 95 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£95.82
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023