Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Left Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178869 |
| Number of Connectors / Ports | 2 |
| Weight | 1.6 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.67
Important compatibility info
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| Type | Mass Air Flow Sensor |
| for OE number | 651 090 01 48 |
| Number of Connectors / Ports | 4 |
| Weight | 0.194 kg |
| Housing Type | with housing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.70
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw, with top |
| Placement on Vehicle | Front Axle Right |
| Weight | 10.368 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 109.9 mm |
| Wheel Sided Joint Diameter | 111.4 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 867 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 14.414 kg |
| Length | 1735 mm |
| Pipe Diameter | 50 mm |
| Cone Size | 32 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Function | Tie Rod |
| Extra Description | ProKit |
| External Thread Size | M27 x 1,5 |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
| Weight | 2.33 kg |
| Type | Hose, air supply |
| Function | Hose, air supply |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Placement on Vehicle | Left |
| Function | Front Cover Lock |
| Weight | 0.55 kg |
| Type | Front Cover Lock |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Mechanical |
| Weight | 3.9 kg |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 372 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 14 mm. 35 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 8.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 1640 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M28 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 1706 036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 1.585 kg |
| Inner diameter | 45 mm |
| Function | Suspension, propshaft |
| Replaces | 07189 |
| Type | Suspension, propshaft |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.71
Important compatibility info
| Weight | 1.03 kg |
| for OE number | 11 31 8 618 318 S8 |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | G53HR |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Guide, timing chain (29903)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Tensioner, timing chain (47638)
- 1x Febi Sprocket, crankshaft (30477)
- 1x Febi Centering Bolt, crankshaft pulley (33618)
£101.71
Important compatibility info
| Weight | 4.265 kg |
| Placement on Vehicle | Front Axle Right |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 34647 |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Additional Information 2 | with ball joint, with rubber mount |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (21467)
£101.72
Important compatibility info
| Length | 1030 mm |
| Thickness | 116 mm |
| Function | Centre Rod Assembly |
| Weight | 7.9 kg |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd front axle |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.74
Important compatibility info
| Min. Length | 562 mm |
| Additional Information 2 | with screw |
| Weight | 6.358 kg |
| External Teeth, Wheel Side | 37 |
| External Teeth, Diff.Side | 27 |
| Wheel Sided Joint Diameter | 89 mm |
| Thread Size | M16x1,5 |
| Placement on Vehicle | Front Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 82.3 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.76
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower, Front |
| Steering arm type | Control Arm |
| Paired article numbers | 181132 |
| Weight | 6.431 kg |
| Material | Cast Steel |
| Additional Information 2 | with rubber mount, with ball joint |
| Cone Size | 28 mm |
| Type | Control/Trailing Arm, wheel suspension |
| External Thread Size | M16 x 1,5 |
| Function | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.78
Important compatibility info
| Rotor Style | perforated/vented |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 46.6 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 28 mm |
| Bolt Hole Circle Diameter | 112 mm |
| Centering Diameter | 67 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Function | Brake Disc |
| Weight | 11.785 kg |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.80
Important compatibility info
| Outer diameter | 86 mm |
| Weight | 2.1 kg |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Width of castor bearing surface | 39 mm |
| Type | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.81
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.210 kg |
| for OE number | 22 11 6 775 905 |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.84
Important compatibility info
| Weight | 1.346 kg |
| Type | Cable Pull, manual transmission |
| Function | Cable Pull, manual transmission |
| Inner length 1 | 1750 mm |
| Inner length 2 | 1730 mm |
| Outer length 1 | 2000 mm |
| Outer length 2 | 1963 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.84
Important compatibility info
| Weight | 0.468 kg |
| Type | Injector Nozzle |
| Function | Injector Nozzle |
| Operating Mode | Mechanical |
| Number of Connectors / Ports | 1 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.85
Important compatibility info
| Operating Mode | Mechanical |
| Additional Information 2 | Requires special tools for mounting |
| Function | Chain Kit, oil pump drive |
| Weight | 0.625 kg |
| Type | Chain Kit, oil pump drive |
| Chain Type | Simplex, Closed chain |
| Extra Description | Standard Medium Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£101.87
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023