Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle |
| Shock Absorber Mounting Type | Top pin, Bottom eye |
| Max. Length | 775 mm |
| Shock Absorber Type | Oil Pressure |
| Min. Length | 455 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 16 mm |
| Function | Shock Absorber |
| Mounting points diameter | 16 mm |
| Weight | 3.64 kg |
| External Thread Size | M14 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.17
Important compatibility info
| Additional Information | with oil drain plug |
| Weight | 3.65 kg |
| Additional Information 2 | with seal ring |
| External Thread Size | M16 x 1,5 |
| Length | 421 mm |
| Wet Sump Material | Aluminium |
| Type | Oil sump |
| Function | Oil sump |
| Extra Description | febi Plus |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.19
Important compatibility info
| Resistor Type | Hot-wire Sensor |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Weight | 0.04 kg |
| Function | Mass Air Flow Sensor |
| Housing Type | without housing |
| Additional Information | with gasket/seal |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Weight | 0.23 kg |
| Housing Type | with housing |
| Material | Plastic |
| Number of Connectors / Ports | 5 |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-film Sensor |
| Function | Mass Air Flow Sensor |
| for OE number | 13 62 7 566 986 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.23
Important compatibility info
| Extra Description | febi Plus |
| Function | Connecting Cable, injector |
| Type | Connecting Cable, injector |
| Weight | 0.260 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.25
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 443 mm |
| Min. Length | 273 mm |
| Pipe Diameter | 63.5 mm. 54 mm |
| Piston conrod diameter | 14 mm |
| Function | Shock Absorber |
| External Thread Size | M14 x 1,5 |
| Weight | 3.64 kg |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.26
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x1,5 |
| External Teeth, Wheel Side | 30 |
| Weight | 8.388 kg |
| External Teeth, Diff.Side | 27 |
| Min. Length | 715 mm |
| Wheel Sided Joint Diameter | 89.8 mm |
| Transmission-side joint diameter | 89 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.27
Important compatibility info
| Function | Timing Chain Kit |
| Timing Chain Size | G53HC |
| Type | Timing Chain Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 138 |
| Weight | 0.909 kg |
| for OE number | 98 228 270 80 S3 |
| Extra Description | Basic Short Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (29867)
- 1x Febi Tensioner, timing chain (171786)
- 1x Febi Guide, timing chain (29901)
- 1x Febi Guide, timing chain (29902)
- 1x Febi Guide, timing chain (29903)
£98.31
Important compatibility info
| Function | Splash Guard, brake disc |
| Extra Description | febi Plus |
| Weight | 1.974 kg |
| Paired article numbers | 176756 |
| Type | Splash Guard, brake disc |
| Placement on Vehicle | Rear Axle Right |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.34
Important compatibility info
| Weight | 1.85 kg |
| Function | Water Pump & Timing Belt Kit |
| Number of Teeth | 120 |
| Belts | with rounded tooth profile |
| Water pump impeller material | Metal |
| Type | Water Pump & Timing Belt Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (21724)
- 1x Febi Water Pump, engine cooling (24360)
£98.35
Important compatibility info
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Weight | 2.0 kg |
| Vehicle Equipment | for vehicles with electric parking brake |
| Type | Brake Caliper |
| Placement on Vehicle | Rear Axle Left |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Paired article numbers | 183207 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Weight | 2.0 kg |
| Type | Brake Caliper |
| Function | Brake Caliper |
| Brake caliper piston diameter | 38 mm |
| Brake Caliper Type | Brake Caliper (1 piston) |
| Additional Information | with electric motor |
| Material | Cast Aluminium |
| Paired article numbers | 183206 |
| Placement on Vehicle | Rear Axle Right |
| Vehicle Equipment | for vehicles with electric parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.38
Important compatibility info
| Additional Information | with piston |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| Thickness | 370 mm. 146 mm |
| External Thread Size | M20 x 2,5, M14 x 1,5, M12 x 1,75 |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 259 mm. 258 mm |
| Weight | 11.7 kg |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.39
Important compatibility info
| Function | Mounting, engine |
| Placement on Vehicle | Rear |
| Weight | 2.524 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| Rolling piston material | Steel |
| Weight | 8.0 kg |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 258 mm. 179 mm |
| Thickness | 205 mm. 540 mm |
| Function | Bellow, air suspension |
| Type | Bellow, air suspension |
| External Thread Size | M12 x 1,5, M16 x 1,5, M18 x 2 |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| Weight | 4.98 kg |
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Outer diameter | 227 mm. 340 mm |
| Thickness | 240 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.43
Important compatibility info
| Type | Clock Spring, airbag |
| Weight | 0.210 kg |
| Extra Description | febi Plus |
| Function | Clock Spring, airbag |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.48
Important compatibility info
| Outer length 1 | 1018 mm |
| Outer length 2 | 1020 mm |
| Driver Position | for right-hand drive vehicles |
| Weight | 0.956 kg |
| Inner length 2 | 745 mm |
| Inner length 1 | 760 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.49
Important compatibility info
| Function | Shock Absorber |
| Weight | 5.63 kg |
| Placement on Vehicle | Rear Axle |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom Pin |
| Max. Length | 716 mm |
| Min. Length | 433 mm |
| Pipe Diameter | 76 mm. 63.4 mm |
| Mounting points diameter | 16 mm |
| Piston conrod diameter | 20 mm |
| External Thread Size | M16 x 1,5 |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
Important compatibility info
| Internal Thread Size | M22 x 1,5 |
| Material | Steel |
| Outer diameter | 396 mm |
| Number of Connectors / Ports | 4 |
| Weight | 15.0 kg |
| Capacity | 50 l |
| Function | Air Tank, compressed-air system |
| Type | Air Tank, compressed-air system |
| Operating Pressure | 15 bar |
| Length | 498 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£98.51
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023