Proud to be a UK-based company
Contact us
Important compatibility info
| Min. Length | 230 mm |
| Pipe Diameter | 40 mm |
| Function | Shock Absorber, driver cab suspension |
| Placement on Vehicle | Left Front, Right Front |
| Mounting points diameter | 12 mm. 18 mm |
| Weight | 2.05 kg |
| Max. Length | 264 mm |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Piston conrod diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 4 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Rubber |
| Weight | 2.47 kg |
| Type | Water Pump, engine cooling |
| for OE number | 104 200 33 01 |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 2.3 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 256 mm |
| Min. Length | 157 mm |
| Pipe Diameter | 42 mm. 78 mm |
| Mounting points diameter | 12 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 99 mm |
| Wheel Sided Joint Diameter | 83 mm |
| Additional Information 2 | with nut |
| Thread Size | M27x1,5 |
| Bolt Hole Circle Diameter | 86 mm |
| Bore Diameter | 10.5 mm |
| External Teeth, Wheel Side | 30 |
| Weight | 5.778 kg |
| Number of mounting bores | 6 |
| Min. Length | 626 mm |
| ABS Ring Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Left |
| Length | 555 mm |
| Outer diameter | 6 mm |
| Operating Mode | Mechanical |
| Weight | 0.050 kg |
| Type | Cable Pull, seat back adjustment |
| Function | Cable Pull, seat back adjustment |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 12 |
| Rated Power | 1.7 kW |
| Type | Starter |
| Function | Starter |
| Weight | 3.59 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Weight | 0.660 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Water pump impeller material | Plastic |
| Function | Water Pump & Timing Belt Kit |
| Type | Water Pump & Timing Belt Kit |
| Weight | 1.42 kg |
| Seal Material | Rubber |
| Belts | with trapezoidal tooth profile |
| Number of Teeth | 168 |
| for OE number | 55210628 S2 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Belt Kit (11083)
- 1x Febi Water Pump, engine cooling (10599)
£97.80
Important compatibility info
| External Teeth, Wheel Side | 38 |
| Thread Size | M20x1,5 |
| Additional Information 2 | with screw, with top |
| Placement on Vehicle | Front Axle Right |
| Weight | 10.368 kg |
| Function | Drive Shaft |
| Type | Drive Shaft |
| Transmission-side joint diameter | 109.9 mm |
| Wheel Sided Joint Diameter | 111.4 mm |
| External Teeth, Diff.Side | 26 |
| Min. Length | 867 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 2.620 kg |
| Material | PP (Polypropylene) |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| External Thread Size | M20 x 1,5 |
| Weight | 8.3 kg |
| Placement on Vehicle | Front Axle |
| Length | 1640 mm |
| Cone Size | 26 mm |
| Pipe Diameter | 40 mm |
| Internal Thread Size | M28 x 1,5 LHT |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| for OE number | 1706 036 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Length | 1030 mm |
| Thickness | 116 mm |
| Function | Centre Rod Assembly |
| Weight | 7.9 kg |
| Additional Information | with castellated nut and split pins |
| Rod/Strut | Guide Rod |
| Placement on Vehicle | Front Axle, from 1st idler arm to the 2nd front axle |
| Cone Size | 30 mm |
| Pipe Diameter | 40 mm |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Type | Centre Rod Assembly |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Weight | 10.6 kg |
| Water pump impeller material | Grey Cast Iron |
| Seal Material | Rubber |
| Function | Water Pump, engine cooling |
| Number of Wings | 12 |
| Material | Grey Cast Iron |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| for OE number | 542 200 19 01 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.80
Important compatibility info
| Placement on Vehicle | Rear Axle Left |
| Outer diameter | 228 mm. 220 mm |
| Thickness | 122 mm. 385 mm |
| Paired article numbers | 102809 |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| Rolling piston material | Plastic |
| External Thread Size | M7 x 1, M10 x 1,5, M12 x 1,75 |
| Type | Bellow, air suspension |
| Weight | 4.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.82
Important compatibility info
| Weight | 1.98 kg |
| Stabiliser Diameter | 19.6 mm |
| Placement on Vehicle | Rear Axle |
| Type | Stabiliser Bar, suspension |
| Function | Stabiliser Bar, suspension |
| Extra Description | ProKit |
| Additional Information | with rubber mounts |
| Additional Information 2 | with coupling rod |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Stabiliser Bar, suspension (171117)
- 2x Febi Link/Coupling Rod, stabiliser bar (102444)
£97.83
Important compatibility info
| Rotor Style | Internally Vented |
| Weight | 11.16 kg |
| Rim Hole Number | 5 -Hole |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 376 mm |
| Thickness | 41.9 mm |
| Brake Disc Thickness | 26 mm |
| Minimum thickness | 24 mm |
| Bolt Hole Circle Diameter | 108 mm |
| Centering Diameter | 64.5 mm |
| Surface | Coated |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.85
Important compatibility info
| Weight | 1.2 kg |
| Extra Description | Standard Medium Kit |
| Chain Type | Simplex, Closed chain |
| Number of Chain Links | 130 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| for OE number | 03E 198 229 A S1 |
| Timing Chain Size | G53HP, G53HR, G53AM, G53HC |
| Additional Information | with chain tensioner, with slide rails |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Timing Chain (17617)
- 2x Febi Gear/Sprocket, camshaft (27080)
- 1x Febi Sprocket, crankshaft (27068)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Guide, timing chain (25457)
- 1x Febi Guide, timing chain (25467)
- 2x Febi Bolt, camshaft gear (32183)
- 1x Febi Pulley Bolt (32025)
£97.88
Important compatibility info
| Function | Brake Disc |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Rear Axle |
| Outer diameter | 324 mm |
| Thickness | 120 mm |
| Brake Disc Thickness | 30 mm |
| Centering Diameter | 157 mm |
| Weight | 12.0 kg |
| Minimum thickness | 26 mm |
| Bolt Hole Circle Diameter | 192 mm |
| Surface | Coated |
| Internal Thread Size | M12 x 1,5 |
| Rim Hole Number | 6 -Hole |
| Type | Brake Disc Rotor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.88
Important compatibility info
| Extra Description | febi Plus |
| Function | Cylinder Head Cover |
| Colour | Black |
| Weight | 1.074 kg |
| Additional Information | with gasket/seal |
| Type | Cylinder Head Cover |
| for OE number | 03L 103 469 F |
| Material | Plastic |
| Heating / Cooling | with jiggle pin |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.90
Important compatibility info
| Placement on Vehicle | Left |
| Weight | 1.761 kg |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, automatic transmission |
| Function | Mounting, automatic transmission |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£97.91
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023