Proud to be a UK-based company
Contact us
Important compatibility info
| Number of Connectors / Ports | 4 |
| Weight | 0.19 kg |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
| Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.72
Important compatibility info
| Inner length 1 | 912 mm |
| Function | Cable Pull, manual transmission |
| Type | Cable Pull, manual transmission |
| Driver Position | for right-hand drive vehicles |
| Weight | 1.358 kg |
| Inner length 2 | 722 mm |
| Outer length 1 | 1070 mm |
| Outer length 2 | 1017 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Replaces | 44598 |
| Suction side external thread size | M12 x 1,5 |
| External Thread Size | M14 x 1,5 |
| Pressure side external thread size | M14 x 1,5 |
| Function | Tilt Pump, driver cab |
| Type | Tilt Pump, driver cab |
| Weight | 3.0 kg |
| Number of Connectors / Ports | 3 |
| Operating Mode | Manual |
| Hole Spacing | 95 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Extra Description | ProKit |
| Weight | 10.400 kg |
| Rod/Strut | Push Rod |
| Length | 669 mm |
| Placement on Vehicle | Front Axle |
| Additional Information | with nuts |
| Function | Centre Rod Assembly |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| External Thread Size | M14 x 1,5 |
| Weight | 3.9 kg |
| Placement on Vehicle | Rear |
| Operating Mode | Mechanical |
| Min. Length | 352 mm |
| Pipe Diameter | 45 mm |
| Mounting points diameter | 12 mm |
| Piston conrod diameter | 20 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Right Front |
| Additional Information | with electric motor |
| Operating Mode | Electric |
| Paired article numbers | 178868 |
| Number of Connectors / Ports | 2 |
| Weight | 1.6 kg |
| Type | Window Regulator |
| Function | Window Regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Material | Steel |
| Outer diameter | 149 mm |
| Thickness | 32 mm |
| Inner diameter | 31 mm |
| Number of Ribs | 5 |
| Number of Connectors / Ports | 6 |
| Parameter | 6PK |
| Function | Belt Pulley, crankshaft |
| Weight | 1.92 kg |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Weight | 4.5 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Voltage | 12 V |
| Number of Teeth | 9 |
| Rated Power | 2.0 kW |
| Weight | 4.6 kg |
| Type | Starter |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front |
| Operating Mode | Pneumatic |
| Paired article numbers | 192762 |
| Weight | 2.0 kg |
| Shock Absorber Mounting Type | Top pin, Bottom Pin |
| Max. Length | 340 mm |
| Min. Length | 224 mm |
| Type | Shock Absorber, driver cab suspension |
| Function | Shock Absorber, driver cab suspension |
| Extra Description | febi Plus |
| External Thread Size | M12 x 1,75 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Additional Information 2 | with wheel studs |
| Placement on Vehicle | Front Axle |
| Outer diameter | 290 mm |
| Weight | 21.0 kg |
| Bolt Hole Circle Diameter | 205 mm |
| Brake Disc Thickness | 25.2 mm |
| Brake Disc Type | Internally Vented |
| Minimum thickness | 23 mm |
| Thickness | 160 mm |
| Function | Brake Disc |
| Surface | Coated |
| External Thread Size | M18 x 1,5 |
| Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 2.24 kg |
| Internal Thread Size | M26 x 1,5, M16 x 1,5 |
| Rotation Direction | Anticlockwise rotation |
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 10.5 mm |
| Type | Hydraulic Pump, steering |
| Function | Hydraulic Pump, steering |
| for OE number | 002 460 54 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Function | Oil sump |
| Extra Description | febi Plus |
| Type | Oil sump |
| Weight | 3.22 kg |
| Additional Information | with oil drain plug |
| Additional Information 2 | with seal ring |
| for OE number | 06 52 171 |
| Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 894 mm |
| Outer diameter | 50 mm |
| Rod/Strut | Push Rod |
| Driver Position | for right-hand drive vehicles |
| Weight | 8.4 kg |
| Cone Size | 30 mm |
| Function | Centre Rod Assembly |
| External Thread Size | M24 x 1,5 |
| Thread Type | with right-hand thread |
| Extra Description | ProKit |
| Internal Thread Size | M30 x 1,5 |
| Type | Centre Rod Assembly |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Paired article numbers | 178322 |
| Weight | 0.953 kg |
| Extra Description | febi Plus |
| Function | Camshaft Adjuster |
| Type | Camshaft Adjuster |
| Placement on Vehicle | Intake Side, Right |
| Number of Teeth | 40 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Weight | 2.24 kg |
| Outer diameter | 153 mm |
| Thickness | 41.5 mm |
| Inner diameter | 30 mm |
| Function | Belt Pulley, crankshaft |
| Parameter | 6PK |
| Number of Ribs | 5 |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 829 mm. 881 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Pipe Diameter | 50 mm |
| Function | Centre Rod Assembly |
| Weight | 7.1 kg |
| External Thread Size | M20 x 1,5 |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| Extra Description | ProKit |
| Type | Centre Rod Assembly |
| Adjustable | Adjustable on one side |
| Additional Information | with castellated nut and split pins |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Width of castor bearing surface | 26 mm |
| Weight | 0.666 kg |
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Additional Information 2 | with crown nut |
| Internal Thread Size | M38 x 1,5 |
| Weight | 7.4 kg |
| Length | 669 mm |
| Rod/Strut | Push Rod |
| Cone Size | 28.6 mm |
| Adjustable | Adjustable on one side |
| Pipe Diameter | 46 mm |
| Type | Centre Rod Assembly |
| Function | Centre Rod Assembly |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
Important compatibility info
| Steering arm type | Control Arm |
| Cone Size | 25 mm |
| Paired article numbers | 180968 |
| Weight | 7.631 kg |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Placement on Vehicle | Front Axle Right |
| Material | Sheet Steel |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£99.73
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023