Important compatibility info
Number of Wings | 12 |
Seal Material | Rubber |
Water pump impeller material | Grey Cast Iron |
Function | Water Pump, engine cooling |
Material | Grey Cast Iron |
Weight | 10.1 kg |
Type | Water Pump, engine cooling |
Additional Information | with gaskets/seals |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left |
Additional Information | with rubber mounts |
Material | Aluminium |
Additional Information 2 | with ball joint |
Steering arm type | Control Arm |
Paired article numbers | 197245 |
Weight | 3.709 kg |
Cone Size | 13.7 mm |
Type | Control/Trailing Arm, wheel suspension |
Function | Control/Trailing Arm, wheel suspension |
Cone Size 2 | 15.2 mm |
External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Brake Caliper |
Brake Caliper Type | Brake Caliper (1 piston) |
Placement on Vehicle | Rear Axle Right |
Additional Information | with electric motor |
Material | Cast Iron |
Vehicle Equipment | for vehicles with electric parking brake |
Weight | 3.0 kg |
Paired article numbers | 183210 |
Brake caliper piston diameter | 41 mm |
Type | Brake Caliper |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 384 mm |
Filter type | with water separator, without filter heating |
Weight | 1.9 kg |
Type | Housing, fuel filter |
Function | Housing, fuel filter |
Internal Thread Size | M16 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Hand Feed Pump (176223)
- 1x Febi Fuel filter (29454)
- 1x Febi Water Separator, fuel system (103284)
Important compatibility info
Function | Mounting, engine |
Placement on Vehicle | Rear |
Weight | 2.524 kg |
Bearing/Mounting Type | Rubber-Metal Mount |
Type | Mounting, engine |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 8.7 kg |
Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
Length | 568 mm |
Steering arm type | Trailing Arm |
Paired article numbers | 39693 |
Rod/Strut | Guide Rod |
Pipe Diameter | 46 mm |
Mounting points diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
Type | Control/Trailing Arm, wheel suspension |
Hole Spacing | 115 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 5.31 kg |
Paired article numbers | 37350 |
Function | Control/Trailing Arm, wheel suspension |
Steering arm type | Control Arm |
Placement on Vehicle | Front Axle Right, Lower |
Bolt Head Diameter | 17 mm |
Material | Cast Steel |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil Pump |
Weight | 1.275 kg |
Type | Oil Pump |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 2.81 kg |
Length | 157 mm |
Thickness | 95 mm |
Number of Holes | 5 |
Bolt Hole Circle Diameter | 130 mm |
Function | Wheel Hub |
Type | Wheel Hub |
Additional Information 2 | without wheel bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Placement on Vehicle | Front Axle Left, Lower |
Material | Cast Steel |
Steering arm type | Control Arm |
Paired article numbers | 37349 |
Bolt Head Diameter | 17 mm |
Function | Control/Trailing Arm, wheel suspension |
External Thread Size | M12 x 1,25, M14 x 1,5 |
Weight | 5.31 kg |
Type | Control/Trailing Arm, wheel suspension |
Additional Information | with rubber mounts, with holders |
Additional Information 2 | with ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 4 |
Weight | 0.19 kg |
Type | Mass Air Flow Sensor |
Resistor Type | Hot-wire Sensor |
Function | Mass Air Flow Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Function | Oil sump |
Extra Description | febi Plus |
Type | Oil sump |
Weight | 3.22 kg |
Additional Information | with oil drain plug |
Additional Information 2 | with seal ring |
for OE number | 06 52 171 |
Wet Sump Material | Cast Aluminium |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 0.200 kg |
Internal Thread Size | M14 x 1,5 |
Length | 160 mm |
Width | 47 mm. 65 mm |
Colour | Black |
Driver Position | for right-hand drive vehicles |
Number of Connectors / Ports | 4 |
Function | Gear Lever Knob |
Type | Gear Lever Knob |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Weight | 4.5 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Connectors / Ports | 5 |
Function | EGR Valve |
Type | EGR Valve |
Additional Information | with gasket/seal |
Weight | 0.770 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Length | 140 mm |
Internal Thread Size | M16 x 1,5 |
Number of Connectors / Ports | 2 |
Height | 115 mm |
Width | 120 mm |
Rotation Direction | Clockwise rotation |
Function | Hydraulic Pump, steering |
Weight | 2.302 kg |
Type | Hydraulic Pump, steering |
for OE number | 002 460 75 80 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Material | Steel |
Outer diameter | 149 mm |
Thickness | 32 mm |
Inner diameter | 31 mm |
Number of Ribs | 5 |
Number of Connectors / Ports | 6 |
Parameter | 6PK |
Function | Belt Pulley, crankshaft |
Weight | 1.92 kg |
Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Voltage | 12 V |
Number of Teeth | 9 |
Rated Power | 2.0 kW |
Weight | 4.6 kg |
Type | Starter |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with wheel studs |
Placement on Vehicle | Front Axle |
Outer diameter | 290 mm |
Weight | 21.0 kg |
Bolt Hole Circle Diameter | 205 mm |
Brake Disc Thickness | 25.2 mm |
Brake Disc Type | Internally Vented |
Minimum thickness | 23 mm |
Thickness | 160 mm |
Function | Brake Disc |
Surface | Coated |
External Thread Size | M18 x 1,5 |
Type | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Thread Size | M12 x 1,75 |
Placement on Vehicle | Rear |
Operating Mode | Pneumatic |
Shock Absorber Mounting Type | Top pin, Bottom eye |
Max. Length | 405 mm |
Min. Length | 287 mm |
Pipe Diameter | 62 mm. 43 mm |
Mounting points diameter | 14 mm |
Piston conrod diameter | 13 mm |
Type | Shock Absorber, driver cab suspension |
Function | Shock Absorber, driver cab suspension |
Weight | 2.33 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023