Proud to be a UK-based company
Contact us
Important compatibility info
| Weight | 2.408 kg |
| Outer diameter | 157 mm |
| Thickness | 39.5 mm |
| Inner diameter | 37 mm |
| Number of Ribs | 6 |
| Parameter | 7PK |
| Function | Belt Pulley, crankshaft |
| Type | Belt Pulley, crankshaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.30
Important compatibility info
| Placement on Vehicle | Rear Axle Left, Lower, Rear Axle Right |
| Length | 612 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Pipe Diameter | 48 mm |
| Mounting points diameter | 20 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.32
Important compatibility info
| Number of Wings | 7 |
| Material | Grey Cast Iron |
| Number of Teeth | 23 |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Weight | 4.17 kg |
| Seal Material | Rubber |
| Type | Water Pump, engine cooling |
| Additional Information | with gaskets/seals |
| Additional Information 2 | with gear |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.36
Important compatibility info
| for OE number | 28100-67052 |
| Voltage | 12 V |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Type | Starter |
| Weight | 5.26 kg |
| Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Weight | 0.16 kg |
| Number of Connectors / Ports | 4 |
| Inner diameter | 63 mm |
| Housing Type | with housing |
| Function | Mass Air Flow Sensor |
| Additional Information 2 | Control Unit/Software must be trained/updated |
| Outer diameter | 70 mm |
| Material | Plastic |
| Type | Mass Air Flow Sensor |
| Resistor Type | Hot-wire Sensor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.39
Important compatibility info
| Weight | 1.043 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.48
Important compatibility info
| Weight | 0.116 kg |
| Operating Mode | Electric |
| Number of Connectors / Ports | 6 |
| Function | Actuator, central locking system |
| Extra Description | febi Plus |
| Type | Actuator, central locking system |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.52
Important compatibility info
| Placement on Vehicle | non-steered leading axle |
| Outer diameter | 228 mm. 197 mm |
| Thickness | 165 mm. 448 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston rod, with piston |
| Weight | 6.93 kg |
| External Thread Size | M16 x 1,5, M24 x 1,5, M10 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.56
Important compatibility info
| Rim Hole Number | 5 -Hole |
| Weight | 11.96 kg |
| Rotor Style | Internally Vented |
| Placement on Vehicle | Front Axle |
| Outer diameter | 345 mm |
| Thickness | 45.4 mm |
| Brake Disc Thickness | 30 mm |
| Minimum thickness | 27.5 mm |
| Bolt Hole Circle Diameter | 110 mm |
| Centering Diameter | 70 mm |
| Surface | Coated |
| Number of mounting bores | 1 |
| Machining | High-carbon |
| Type | Brake Disc Rotor |
| Function | Brake Disc |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.57
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Cone Size | 25 mm |
| Weight | 7.326 kg |
| Paired article numbers | 181823 |
| Steering arm type | Control Arm |
| Placement on Vehicle | Front Axle Right, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.59
Important compatibility info
| Placement on Vehicle | Front Axle Left, Lower |
| Additional Information | with rubber-metal mounts |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 181829 |
| Weight | 7.326 kg |
| Cone Size | 25 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.59
Important compatibility info
| Material | Plastic |
| Weight | 0.98 kg |
| Additional Information | with coolant level sensor |
| Type | Expansion Tank, coolant |
| Function | Expansion Tank, coolant |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.60
Important compatibility info
| Weight | 3.86 kg |
| Type | Starter |
| Function | Starter |
| Number of Teeth | 10 |
| Rated Power | 2.2 kW |
| Voltage | 12 V |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Weight | 1.16 kg |
| Type | Valve Plate, air compressor |
| Function | Valve Plate, air compressor |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Number of mounting bores | 3 |
| Type | Central Slave Cylinder, clutch |
| Weight | 0.456 kg |
| for OE number | 1 672 781 |
| Function | Central Slave Cylinder, clutch |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Additional Information 2 | Requires special tools for mounting |
| Chain Type | Simplex, with chain lock |
| Number of Chain Links | 190 |
| Timing Chain Size | G68HRF |
| Function | Timing Chain |
| Type | Timing Chain |
| Weight | 1.040 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Outer diameter | 300 mm |
| Thickness | 84.7 mm |
| Placement on Vehicle | Rear Axle |
| Function | Brake Disc |
| Centering Diameter | 52.3 mm |
| Weight | 7.54 kg |
| Minimum thickness | 9.5 mm |
| Additional Information 2 | with ABS sensor ring |
| Bolt Hole Circle Diameter | 108 mm |
| Rim Hole Number | 5 -Hole |
| Surface | Oiled |
| Type | Brake Disc Rotor |
| Brake Disc Thickness | 11 mm |
| Rotor Style | Solid |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.61
Important compatibility info
| Paired article numbers | 179342 |
| Weight | 0.7 kg |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Placement on Vehicle | Right |
| Type | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Number of Connectors / Ports | 2 |
| Function | Solenoid Valve |
| Type | Solenoid Valve |
| Weight | 0.44 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 2.915 kg |
| Placement on Vehicle | Front Axle Left, Lower, Front Axle Right |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 15.100 kg |
| Extra Description | ProKit |
| Function | Tie Rod |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
| Length | 1588 mm |
| Placement on Vehicle | Front Axle, Rear Axle |
| External Thread Size | M24 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 12.0 kg |
| Cone Size | 30 mm |
| Pipe Diameter | 42 mm |
| Length | 1531 mm |
| Placement on Vehicle | Front Axle |
| Internal Thread Size | M30 x 1,5 |
| Additional Information 2 | with crown nut |
| Function | Tie Rod |
| External Thread Size | M24 x 1,5 |
| Type | Tie Rod |
| Extra Description | ProKit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Paired article numbers | 179341 |
| Number of Connectors / Ports | 6 |
| Function | Electric Motor, window regulator |
| Type | Electric Motor, window regulator |
| Placement on Vehicle | Left |
| Weight | 0.7 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Additional Information 2 | with bolts/screws |
| Function | Release Fork, clutch |
| Weight | 3.604 kg |
| Type | Release Fork, clutch |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Placement on Vehicle | Rear Axle Left, Front, Lower, Rear Axle Right |
| Weight | 0.75 kg |
| Additional Information 2 | with bearing |
| Material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Placement on Vehicle | Right |
| Paired article numbers | 179339 |
| Number of Connectors / Ports | 6 |
| Weight | 0.7 kg |
| Type | Electric Motor, window regulator |
| Function | Electric Motor, window regulator |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Water Pump, engine cooling |
| Water pump impeller material | Grey Cast Iron |
| Material | Grey Cast Iron |
| Number of Wings | 8 |
| Seal Material | Rubber |
| Weight | 3.76 kg |
| Type | Water Pump, engine cooling |
| Additional Information | with gasket/seal |
| Additional Information 2 | with seal ring, with bolts |
| for OE number | 5 0036 1919 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Length | 465 mm |
| Placement on Vehicle | Rear Axle |
| Thickness | 102 mm |
| Diameter | 85 mm |
| Rod/Strut | Coupling Rod |
| Weight | 4.499 kg |
| Type | Link/Coupling Rod, stabiliser bar |
| Function | Link/Coupling Rod, stabiliser bar |
| Additional Information | with rubber-metal mount |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 3.05 kg |
| Placement on Vehicle | Lower Front Axle, Rear |
| Material | Cast Steel |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 6.5 kg |
| Placement on Vehicle | Front Axle, steered trailing axle |
| Length | 281 mm |
| Steering arm type | Trailing Arm |
| Rod/Strut | Push Rod |
| Mounting points diameter | 22 mm. 40 mm |
| Function | Control/Trailing Arm, wheel suspension |
| Hole Spacing | 130 mm |
| Type | Control/Trailing Arm, wheel suspension |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Number of Connectors / Ports | 2 |
| Mounting points diameter | 11 mm |
| Pressure | 130 bar |
| Weight | 2.16 kg |
| Internal Thread Size | M18 x 1,5, M26 x 1,5 |
| Function | Hydraulic Pump, steering |
| Type | Hydraulic Pump, steering |
| Rotation Direction | Clockwise rotation |
| Hole Spacing | 104 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Alternator |
| Pulleys | with belt pulley |
| Belt Pulley Diameter | 48 mm |
| Alternator Charge Current | 80 A |
| Weight | 4.95 kg |
| Function | Alternator |
| Voltage | 12 V |
| Number of Ribs | 6 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Tensioner, timing belt |
| Weight | 0.458 kg |
| for OE number | 3517998 |
| Type | Tensioner, timing belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Release Fork, clutch |
| Weight | 3.306 kg |
| Type | Release Fork, clutch |
| Additional Information 2 | with bolts/screws |
| Additional Information | with bush, with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Type | Connecting Cable, injector |
| Function | Connecting Cable, injector |
| Extra Description | febi Plus |
| Weight | 0.245 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Steering arm type | Control Arm |
| Additional Information 2 | with ball joint |
| Material | Aluminium |
| Weight | 1.3 kg |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 0.478 kg |
| Function | Master Cylinder, clutch |
| Type | Master Cylinder, clutch |
| Bore Diameter | 24 mm |
| for OE number | 81.30715.6152 |
| Fill Medium | Mineral Oil |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Mounting bores distance | 80 mm |
| Operating Pressure | 10 bar |
| Function | Brake Valve, parking brake |
| Number of Connectors / Ports | 3 |
| Weight | 0.900 kg |
| Internal Thread Size | M16 x 1,5, M6 x 1 |
| Type | Brake Valve, parking brake |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.65
Important compatibility info
| Weight | 1.458 kg |
| Chain Type | Silent Chain, Closed chain |
| Number of Chain Links | 116 |
| Function | Timing Chain Kit |
| Type | Timing Chain Kit |
| Timing Chain Size | Z53R |
| Extra Description | Standard Medium Kit |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Sprocket, crankshaft (38382)
- 1x Febi Pulley Bolt (32025)
- 1x Febi Gear/Sprocket, camshaft (38381)
- 1x Febi Bolt, camshaft gear (46364)
- 1x Febi Guide, timing chain (25468)
- 1x Febi Guide, timing chain (38376)
- 1x Febi Tensioner, timing chain (25412)
- 1x Febi Timing Chain (40006)
£107.66
Important compatibility info
| Weight | 1.100 kg |
| Placement on Vehicle | Rear Axle |
| Material | Rubber/Metal |
| Outer diameter | 77 mm |
| Type | Bush Set, axle beam |
| Function | Bush Set, axle beam |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Function | Mounting, engine |
| Type | Mounting, engine |
| Number of Connectors / Ports | 1 |
| for OE number | 4G0 199 381 NF |
| Weight | 1.565 kg |
| Bearing/Mounting Type | electrically adjustable hydro mount |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NG (febi 180461 / SWAG 33 10 7686).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.66
Important compatibility info
| Weight | 3.282 kg |
| Placement on Vehicle | Front Axle Left, Lower |
| Material | Aluminium |
| Steering arm type | Control Arm |
| Paired article numbers | 26656 |
| Function | Control/Trailing Arm, wheel suspension |
| Extra Description | ProKit |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information | with fastening/mounting material, with holder |
| Additional Information 2 | with bearing, with ball joint |
| Additionally Required Parts | 31 10 6 772 199, 31 10 6 757 145, 7 12 9 906 196 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Control/Trailing Arm, wheel suspension (26641)
- 1x Febi Mounting, control/trailing arm (18687)
- 1x Febi Mounting and Bolting Kit, control/trailing arm (104977)
£107.66
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Additional Information 2 | with nut |
| Thread Size | M24x2,0 |
| External Teeth, Wheel Side | 28 |
| Weight | 0.001 kg |
| External Teeth, Diff.Side | 36 |
| Min. Length | 1057 mm |
| ABS Ring Diameter | 105 mm |
| Transmission-side joint diameter | 91 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.73
Important compatibility info
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Function | Wheel Bearing Kit |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Width | 64.5 mm |
| Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
| Type | Wheel Bearing Kit |
| Weight | 3.303 kg |
| Bearing Type | Angular Ball Bearing |
| Inner diameter | 27 mm |
| Outer diameter | 83 mm |
| Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.75
Important compatibility info
| Placement on Vehicle | Rear Axle |
| Outer diameter | 228 mm. 265 mm |
| Thickness | 165 mm. 550 mm |
| Type | Bellow, air suspension |
| Function | Bellow, air suspension |
| Weight | 6.08 kg |
| External Thread Size | M22 x 1,5, M10 x 1,5, M16 x 2 |
| Additional Information | with piston |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.78
Important compatibility info
| for OE number | 21100904 |
| Number of Connectors / Ports | 2. 3 |
| Type | Sender Unit, fuel tank |
| Function | Sender Unit, fuel tank |
| Screw length below head | 687 mm |
| Weight | 0.820 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.81
Important compatibility info
| Additional Information | with gasket/seal |
| Heating / Cooling | with jiggle pin |
| Material | Plastic |
| Function | Cylinder Head Cover |
| Colour Coding | Blue |
| for OE number | 56 07 311 |
| Extra Description | febi Plus |
| Weight | 1.72 kg |
| Type | Cylinder Head Cover |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.81
Important compatibility info
| Inner diameter | 20 mm |
| Operating Mode | Hydraulic |
| Type | Hydraulic Pump, steering |
| Mounting points diameter | 8.5 mm |
| Number of mounting bores | 2 |
| Weight | 1.855 kg |
| Number of Connectors / Ports | 2 |
| Rotation Direction | Clockwise rotation |
| Operating pressure to | 10 bar |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5 |
| Pulleys | with belt pulley |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.83
Important compatibility info
| Width | 68 mm |
| Function | Wheel Bearing Kit |
| Sealing lip material | NBR (nitrile butadiene rubber) |
| Outer diameter | 89 mm |
| Placement on Vehicle | Front Axle Left, Front Axle Right |
| Bearing Type | Angular Ball Bearing |
| Weight | 4.930 kg |
| Inner diameter | 30 mm |
| Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.83
Important compatibility info
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
| Material | Aluminium |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Paired article numbers | 197245 |
| Weight | 3.709 kg |
| Cone Size | 13.7 mm |
| Type | Control/Trailing Arm, wheel suspension |
| Function | Control/Trailing Arm, wheel suspension |
| Cone Size 2 | 15.2 mm |
| External Thread Size | M14 x 1,5 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£107.86
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023