Proud to be a UK-based company
Contact us
Important compatibility info
| Placement on Vehicle | Front Axle Right |
| Thread Size | M24x1,5 |
| Paired article numbers | 188158 |
| External Teeth, Wheel Side | 29 |
| Weight | 9.317 kg |
| External Teeth, Diff.Side | 26 |
| Min. Length | 950 mm |
| Wheel Sided Joint Diameter | 89 mm |
| Transmission-side joint diameter | 84 mm |
| Type | Drive Shaft |
| Function | Drive Shaft |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.66
Important compatibility info
| Weight | 0.637 kg |
| Placement on Vehicle | Front Axle Left |
| Material | Rubber/Metal |
| Paired article numbers | 106135 |
| Function | Suspension Strut Support Mount |
| Type | Suspension Strut Support Mount |
| Additional Information 2 | without ball bearing |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.68
Important compatibility info
| Additional Information | with seal rings |
| Material | Grey Cast Iron |
| Weight | 1.040 kg |
| Number of Wings | 6 |
| Type | Water Pump, engine cooling |
| Function | Water Pump, engine cooling |
| Water pump impeller material | Metal |
| Seal Material | Metal, Rubber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Number of Teeth | 145 |
| Function | Water Pump & Timing Belt Kit |
| Width | 25 mm |
| Weight | 2.021 kg |
| Type | Water Pump & Timing Belt Kit |
| Additional Information | with fastening/mounting material |
| Water pump impeller material | Metal |
| Additional Information 2 | non-switchable water pump |
| Belts | with rounded tooth profile |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Water Pump, engine cooling (103078)
- 1x Febi Timing Belt Kit (100790)
£110.70
Important compatibility info
| Function | Oxygen Sensor |
| Number of circuits | 4 |
| Spanner Size | 22 |
| Lambda Sensor | Heated |
| Type | Oxygen Sensor |
| Weight | 0.080 kg |
| Placement on Vehicle | before catalytic converter |
| External Thread Size | M18 x 1,5 |
| Cable Length | 370 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| External Thread Size | M22 x 1,5, M12 x 1,75 |
| Thickness | 330 mm |
| Type | Bellow, air suspension |
| Weight | 4.0 kg |
| Function | Bellow, air suspension |
| Outer diameter | 258 mm. 150 mm |
| Additional Information | without piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.70
Important compatibility info
| Material | Cast Aluminium |
| Number of Wings | 7 |
| Seal Material | Metal |
| Water pump impeller material | Metal |
| Function | Water Pump, engine cooling |
| Weight | 1.6 kg |
| Additional Information | with gaskets/seals |
| Type | Water Pump, engine cooling |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.75
Important compatibility info
| Placement on Vehicle | both sides, Front |
| Bearing/Mounting Type | Rubber-Metal Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
| Weight | 6.597 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.76
Important compatibility info
| External Thread Size | M12 x 1,75, M16 x 1,5 |
| Outer diameter | 228 mm. 238 mm |
| Thickness | 348 mm. 122 mm |
| Function | Bellow, air suspension |
| Rolling piston material | Plastic |
| Type | Bellow, air suspension |
| Weight | 5.7 kg |
| Additional Information | with piston |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.80
Important compatibility info
| Placement on Vehicle | Right |
| Weight | 1.558 kg |
| Bearing/Mounting Type | Hydro Mount |
| Type | Mounting, engine |
| Function | Mounting, engine |
Additional Information
Technical Information
Not replaceable by 4G0 199 381 NF (febi 180761 / SWAG 33 10 7602).
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.81
Important compatibility info
| Pipe Diameter | 50 mm |
| Adjustable | Adjustable on one side |
| Placement on Vehicle | Front Axle |
| Weight | 7.8 kg |
| Cone Size | 30 mm |
| Length | 635 mm |
| Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
| External Thread Size | M24 x 1,5 |
| Function | Tie Rod |
| Extra Description | ProKit |
| Type | Tie Rod |
| Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.87
Important compatibility info
| Weight | 4.37 kg |
| Placement on Vehicle | Rear Axle Left, Rear Axle Right |
| Shock Absorber Type | Oil Pressure |
| Shock Absorber Mounting Type | Top eye, Bottom eye |
| Max. Length | 413 mm |
| Min. Length | 278 mm |
| Pipe Diameter | 75 mm. 70 mm |
| Mounting points diameter | 20 mm |
| Piston conrod diameter | 20 mm |
| Function | Shock Absorber |
| Type | Shock Absorber |
| Shock Absorber Design | Telescopic Shock Absorber |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.90
Important compatibility info
| Length | 110 mm |
| Type | Hydraulic Pump, steering |
| for OE number | 002 460 58 80 |
| Width | 95 mm |
| Height | 95 mm |
| Function | Hydraulic Pump, steering |
| Internal Thread Size | M16 x 1,5, M26 x 1,5 |
| Weight | 2.229 kg |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.91
Important compatibility info
| Weight | 8.5 kg |
| Placement on Vehicle | Front Axle Left, Rear Axle Left, Front Axle Right, Rear Axle Right |
| Outer diameter | 258 mm. 224 mm |
| Thickness | 350 mm. 110 mm |
| Function | Bellow, air suspension |
| Additional Information | with piston |
| External Thread Size | M10 x 1,5, M16 x 1,5 |
| Type | Bellow, air suspension |
| Rolling piston material | Steel |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.91
Important compatibility info
| Placement on Vehicle | Front Axle |
| Length | 1679 mm |
| Extra Description | ProKit |
| Function | Tie Rod |
| Type | Tie Rod |
| Pipe Diameter | 52 mm |
| Cone Size | 30 mm |
| Weight | 16.5 kg |
| External Thread Size | M24 x 1,5 |
| Additional Information | with nuts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.91
Important compatibility info
| Function | Drive Shaft |
| Type | Drive Shaft |
| Additional Information 2 | with nut |
| Wheel Sided Joint Diameter | 102 mm |
| Transmission-side joint diameter | 95.5 mm |
| Thread Size | M24x1,5 |
| Placement on Vehicle | Front Axle Left |
| External Teeth, Wheel Side | 29 |
| Weight | 9.280 kg |
| External Teeth, Diff.Side | 29 |
| Min. Length | 650 mm |
| Paired article numbers | 182959 |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.94
Important compatibility info
| Weight | 1.8 kg |
| Voltage | 12 V |
| Number of Connectors / Ports | 2 |
| Type | Interior Blower |
| Function | Interior Blower |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.96
Important compatibility info
| Outer diameter | 70 mm |
| Operating Mode | Automatic |
| Housing material | Aluminium |
| Function | Belt Tensioner, v-ribbed belt |
| Track rollers material | Plastic |
| Width of castor bearing surface | 26 mm |
| Weight | 1.630 kg |
| Type | Belt Tensioner, v-ribbed belt |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£110.99
Important compatibility info
| Weight | 6.945 kg |
| Placement on Vehicle | Lower Front Axle, Right |
| Material | Sheet Steel |
| Steering arm type | Control Arm |
| Paired article numbers | 21302 |
| Function | Control/Trailing Arm, wheel suspension |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | without ball joint |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.01
Important compatibility info
| Paired article numbers | 174697 |
| Type | Control/Trailing Arm, wheel suspension |
| Additional Information 2 | with ball joint |
| Steering arm type | Control Arm |
| Function | Control/Trailing Arm, wheel suspension |
| Material | Aluminium |
| Weight | 5.43 kg |
| Placement on Vehicle | Front Axle Left |
| Additional Information | with rubber mounts |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
£111.08
All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023