Important compatibility info
Length | 235 mm |
Height | 40 mm |
Width | 205 mm |
Filter type | Activated Carbon Filter |
Function | Filter, cabin air |
Type | Filter, cabin air |
Important compatibility info
Length | 190 mm |
Function | Brake Hose |
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Type | Brake Hose |
Thread Type | with internal thread, with external thread |
Placement on Vehicle | Left, Right, inner, Front |
Important compatibility info
Length 1 | 755 mm |
Required quantity | 2 |
Type | Warning Contact, brake pad wear |
Function | Warning Contact, brake pad wear |
Placement on Vehicle | Rear Axle |
Important compatibility info
Thread Measurement 2 | M12X1.5 |
Thread Size | M12X1.5 |
Length | 120 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Important compatibility info
Placement on Vehicle | Front Axle Left, Front Axle Right, Wheel Side |
Function | Bellow Kit, drive shaft |
Length | 92 mm |
Inner diameter 2 | 75 mm |
Inner diameter 1 | 22 mm |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Type | Bellow Kit, drive shaft |
Important compatibility info
Function | Accessory Kit, disc brake pad |
Type | Accessory Kit, disc brake pad |
Placement on Vehicle | Rear Axle |
Important compatibility info
Required quantity | 1 |
Length | 676 mm |
Function | Warning Contact, brake pad wear |
Type | Warning Contact, brake pad wear |
Placement on Vehicle | Front Axle |
Important compatibility info
Length 1 | 1560 mm |
Function | Cable Pull, parking brake |
Type | Cable Pull, parking brake |
Placement on Vehicle | Right Rear |
Important compatibility info
Additional Information 2 | without banjo bolt |
Thread Type | with internal thread |
Length | 225 mm |
Function | Brake Hose |
Thread Size | M10x1 |
Placement on Vehicle | Rear Axle Left, Rear Axle Right, outer |
Additional Information | with banjo fitting |
Type | Brake Hose |
Important compatibility info
Diameter | 19 mm |
Function | Wheel Brake Cylinder |
Type | Wheel Brake Cylinder |
Placement on Vehicle | Rear Axle Left |
Important compatibility info
Length 1 | 1560 mm |
Function | Accelerator Cable |
Type | Accelerator Cable |
Important compatibility info
Function | Bellow Kit, drive shaft |
Length | 98 mm |
Inner diameter 2 | 88 mm |
Inner diameter 1 | 25 mm |
Type | Bellow Kit, drive shaft |
Lubrication | with grease lubrication |
Additional Information 2 | with clamps |
Important compatibility info
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Important compatibility info
Length | 234 mm |
Function | Brake Hose |
Type | Brake Hose |
Placement on Vehicle | Rear Axle, Left, outer |
Important compatibility info
Thread Measurement 2 | M12X1.25 |
Thread Size | M12X1.25 |
Length | 78 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Placement on Vehicle | Front Axle Left |
Type | Link/Coupling Rod, stabiliser bar |
Paired article numbers | FDL6697 |
Important compatibility info
Housing Type | without housing |
Opening Temperature | 82 °C |
Additional Information | with gaskets/seals |
Function | Thermostat, coolant |
Type | Thermostat, coolant |
Additional Information
- 1x Borg & Beck Thermostat, coolant (BTS240.82)
Important compatibility info
Additional Information | with banjo fitting |
Length | 422 mm |
Function | Brake Hose |
Additional Information 2 | without banjo bolt |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Thread Type | with internal thread |
Thread Size | M10x1 |
Type | Brake Hose |
Important compatibility info
Additional Information 2 | with clamp holder |
Length | 385 mm |
Function | Brake Hose |
Type | Brake Hose |
Thread Measurement 1 | M10x1 |
Thread Measurement 2 | M10x1 |
Thread Type | with internal thread, with external thread |
Important compatibility info
Thread Measurement 2 | M16X1.5 |
Thread Measurement 1 | M18X1.5 |
Length | 324 mm |
Function | Inner Tie Rod |
Axle Joint Length | 324 mm |
Type | Inner Tie Rod |
Important compatibility info
Material | Cast Steel |
Thread Measurement 2 | M10X1.5 |
Thread Size | M10X1.5 |
Length | 66 mm |
Rod/Strut | Coupling Rod |
Function | Link/Coupling Rod, stabiliser bar |
Type | Link/Coupling Rod, stabiliser bar |






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023