Important compatibility info
for OE number | 28100-67052 |
Voltage | 12 V |
Number of Teeth | 10 |
Rated Power | 2.2 kW |
Type | Starter |
Weight | 5.26 kg |
Function | Starter |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Pipe Diameter | 50 mm |
Adjustable | Adjustable on one side |
Placement on Vehicle | Front Axle |
Weight | 7.8 kg |
Cone Size | 30 mm |
Length | 635 mm |
Internal Thread Size | M38 x 1,5 LHT, M30 x 1,5 RHT |
External Thread Size | M24 x 1,5 |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Additional Information 2 | with crown nut |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Suction side external thread size | M12 x 1,5 |
Number of Connectors / Ports | 3 |
Operating Mode | Manual |
Pressure side external thread size | M14 x 1,5 |
Function | Tilt Pump, driver cab |
Type | Tilt Pump, driver cab |
Weight | 2.4 kg |
Hole Spacing | 70 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Number of Ribs | 8 |
Weight | 2.350 kg |
Length | 2130 mm |
Function | V-Ribbed Belt Set |
Units / Pulleys | incl. tensioner pulley, incl. deflection pulley |
Type | V-Ribbed Belt Set |
Additional Information | with belt tensioner for V-ribbed belt |
Belt Material | EPDM (ethylene propylene diene Monomer (M-class) rubber) |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi V-Ribbed Belt (29077)
- 1x Febi Belt Tensioner, v-ribbed belt (23293)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (23296)
- 1x Febi Deflection/Guide Pulley, v-ribbed belt (23294)
Important compatibility info
Weight | 0.07 kg |
Number of Connectors / Ports | 2 |
Function | Sensor, exhaust gas temperature |
Placement on Vehicle | before soot particulate filter, Left |
Type | Sensor, exhaust gas temperature |
for OE number | 07Z 906 088 A |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Additional Information 2 | with crown nut |
Function | Tie Rod |
Extra Description | ProKit |
Type | Tie Rod |
Length | 1645 mm |
Placement on Vehicle | Front Axle |
Internal Thread Size | M30 x 1,5 LHT, M30 x 1,5 RHT |
External Thread Size | M20 x 1,5 |
Weight | 12.5 kg |
Pipe Diameter | 42 mm |
Cone Size | 28.6 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Width | 68 mm |
Function | Wheel Bearing Kit |
Sealing lip material | NBR (nitrile butadiene rubber) |
Outer diameter | 89 mm |
Placement on Vehicle | Front Axle Left, Front Axle Right |
Bearing Type | Angular Ball Bearing |
Weight | 4.930 kg |
Inner diameter | 30 mm |
Type | Wheel Bearing Kit |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
External Teeth, Wheel Side | 30 |
Weight | 6.074 kg |
Number of mounting bores | 6 |
Bolt Hole Circle Diameter | 86 mm |
Thread Size | M27x1,5 |
Bore Diameter | 10.5 mm |
Min. Length | 682 mm |
ABS Ring Diameter | 83 mm |
Type | Drive Shaft |
Function | Drive Shaft |
Transmission-side joint diameter | 100 mm |
Placement on Vehicle | Rear Axle Right |
Additional Information 2 | with nut |
Wheel Sided Joint Diameter | 83 mm |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
Important compatibility info
Weight | 1.28 kg |
Function | Oil Pump |
for OE number | 06A 115 105 B S1 |
Type | Oil Pump |
Additional Information | with oil pump chain, with chain tensioner |
Timing Chain Size | G52H |
Additional Information 2 | with gear |
Number of Teeth | 50 |
Additional Information
Technical Information
Please refer to the photo and contents list to accurately identify the items included with delivery. Check the sprockets for wear and replace if necessary.
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.
- 1x Febi Chain, oil pump drive (33638)
- 1x Febi Chain Tensioner, oil pump drive (33637)
- 1x Febi Oil Pump (22204)
Important compatibility info
Sealing lip material | NBR (nitrile butadiene rubber) |
Function | Wheel Bearing Kit |
Placement on Vehicle | Rear Axle Left, Rear Axle Right |
Width | 64.5 mm |
Additional Information 2 | with integrated magnetic sensor ring, with ABS sensor ring |
Type | Wheel Bearing Kit |
Weight | 3.303 kg |
Bearing Type | Angular Ball Bearing |
Inner diameter | 27 mm |
Outer diameter | 83 mm |
Additional Information | with fastening/mounting material |
Additional Information
General Information
These products are designed to be used as originally intended and not modified for purpose. Please ensure the products are installed by a competent individual. N.B. products are usually supplied without fitting instructions.






All the team are very helpful and checking parts are correct so do not have the hassle of returns which is great both sides, all can say 10000% all.....
Sept 2023
A genuine fantastic experience, good correspondence and helpful response to my questions, next day delivery and competitive price......
Sept 2023
First time I've ordered from this company, but won't be the last. Fast delivery and parts as ordered. Excellent service. Thank you.
Sept 2023
Fantastic service and great communication. Always quick to answer any questions or queries. Really fast delivery, would highly recommend.
Aug 2023
Customer service with Parts in motion has been excellent! Prices are keen and their postage service was spot on. In the event of an enquiry you.....
Aug 2023